stm32 development board

Universal e-Paper Driver HAT, supports various Waveshare SPI e-Paper raw panels This is a universal driver board for e-Paper raw panels, can be used to drive various SPI interface e-Paper from Waveshare. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) raspberry pi zero w raspberry pi 3b esp8266 pi zero w raw

2.9inch capacitive touch ePaper module, 296×128 resolution. 5-points touch support, user-defined wakeup gesture. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Reversed control interface, for connecting with controller boards like STM32, etc. Comes with development resources and manual (examples for Raspberry Pi). paper display refresh raspberry pico module view angle tag shelf lable interface backlight eink wareshare

SIM7020E is mainly applicable in Europe, Asia, Africa, Australia.Onboard USB interface, for power supply OR debugging. Breakout UART control pins, to connect with host boards like Arduino/STM32 Please check the supported bands according to your local service provider when placing order. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32/Python) Supports communication protocols such as LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS, etc. Supports communication protocols such as LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS, etc.; Onboard USB interface, for power supply OR debugging Breakout UART control pins, to connect with host boards like Arduino/STM32 Onboard voltage translator, 3.3V by default, allows to be switched to 5V via onboard jumper; SIM card slot, supports NB-IoT specific card SIM card slot, supports NB-IoT specific card 2x LED indicators, easy to monitor the working status. Baudrate: 300bps~921600bps (115200bps by default). Control via AT commands (V.25TER, 3GPP TS 27.007, and SIMCOM AT Commands) Baudrate: 300bps~921600bps (115200bps by default) Control via AT commands (V.25TER, 3GPP TS 27.007, and SIMCOM AT Commands)

Provide online user manual, please check the manual carefully before using. Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/STM32). Partial refresh is not supported. No backlight.keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. Outline dimension (raw panel): 45.5mm × 36.4mm × 0.91mm. Display color: Black, White, Yellow, Red. Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

Waveshare 2.13inch e-paper HAT with standard RPi 40PIN GPIO extension header, fits Raspberry Pi series boards, Jetson Nano The 2.13inch E-ink Display HAT for Raspberry Pi has no backlight, keeps displaying last content for a long time even when power down The 2.13 inch e-paper with SPI interface, for connecting with other controller boards like Ardui/Nucleo, etc. The waveshare epaper display with onboard voltage translator, compatible with 3.3V/5V MCUs Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Ardui/STM32), feel free to contact us if you need technical support.

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL. Supports dial-up, telephone call, SMS. Supports LBS base station positioning, it is able to get the approximate position info via mobile network. TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words. Onboard USB interface, for testing AT Commands, network communication, and so on. Onboard audio jack for sound recording, making telephone call, listening the TTS resulting speech, etc. Breakout common used control pins of the A7670X module, make it easy to connect with hosts boards like Arduino/STM32. SIM card slot, supports 1.8V/3V SIM card. 2x LED indicators, easy to monitor the operating status. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).

This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Onboard voltage translator, compatible with 3.3V/5V MCUs; SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL. Supports dial-up, telephone call, SMS Supports LBS base station positioning, it is able to get the approximate position info via mobile network Supports GPS, BeiDou, GLONASS positioning. TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words Onboard USB interface, for testing AT Commands, network communication, and so on. Onboard audio jack for sound recording, making telephone calls, listening the TTS resulting speech, etc. Breakout common used control pins of the A7670E module, make it easy to connect with hosts boards like Arduino/STM32. SIM card slot, supports 1.8V/3V SIM card 2x LED indicators, easy to monitor the operating status. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) It is suitable for IoT applications like remote information processing, monitoring devices, POS, industrial routers, remote diagnosis, satellite positioning, and so on.

The GSM module for Raspberry Pi with standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards The Raspbery Pi bluetooth module also supports GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning The Raspberry Pi GSM module comes with bluetooth 3.0, supports data transferring through Bluetooth This SIM868 GSM Raspberry Pi expansion board is handy,low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth. Comes with development resources and manual (examples for Raspberry Pi/Ardui/STM32), feel free to contact us if you need our help any time, we will always be ready.

4inch e-Paper HAT+ (E), With HAT+ Standard Driver Board. With HAT+ Standard Driver Board. Adopts E Ink Spectra 6 (E6) technology, featuring high contrast and high color saturation No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Can provide with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/RDK X3/STM32) e-Paper driver board: Standard Pi 40PIN GPIO header, suitable for Raspberry Pi series boards/Jetson Nano/RDK X3. Adopts Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi. Adapting SPI interface for connecting with controller boards like Raspberry Pi/Jetson Nano/RDK X3/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs

NB-IoT HAT for Raspberry Pi, standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson Nano, etc. NB-IoT HAT for Jetson Nano, supports TCP, UDP, LWM2M, COAP, DTLS, DNS, NTP, PING, HTTP(S), MQTT(S), TLS/SSL, etc; Supports SIM application toolkit: SAT Class 3, GSM 11.11, USAT NB-IoT HAT for Arduino, onboard Type-C interface for software debugging; Onboard UART control pins, for connecting with host boards like Ardui/STM32 Onboard USB to UART chip, the UART communication pin can be configured via jumper; Onboard nano SIM card slot, compatible with NB-IoT specific card Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/ESP32)

Multi-constellation receiver support, concurrent reception of up to 3 types of GNSS satellite systems from GPS, Beidou, Galileo, and GLONASS, and still retains low power consumption. Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location A-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivity. Features -167dBm navigating sensitivity and outstanding ability for anti-spoofing & anti-jamming, supports geo-fencing Supports U-Center, an easy way to config the module. Standard Raspberry Pi 40PIN GPIO extension header. Supports Raspberry Pi series boards, Jetson Nano. Onboard USB TO UART converter CP2102 for serial debugging Breakouts the module's UART and I2C interface, for connecting with host boards like Arduino/STM32. Baudrate range: 4800~921600bps (9600bps by default). Supports DDC (I2C compliant) interface: up to 400KHz (max) Onboard batt holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts. 4x LEDs for indicating the module operating status. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) GNSS HAT For Raspberry Pi, Multi-Constellation Receiver Support

The R800C GSM/GPRS HAT is a handy, low power Raspberry Pi HAT which features multi-communication functionalities: GSM, GPRS, and phone call, applicable to countries or regions with 2G network coverage, up to 85.6kbps GPRS speed. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson Nano.Supports SMS, phone call, GPRS, TCP/IP, DTMF, HTTP, FTPl, etc. UART interface, for connecting controller boards like STM32. Onboard voltage translator, 3.3V by default, switch to 5V via jumper. 2x LED indicators, easy to monitor the working status.Onboard voltage translator, 3.3V by default, switch to 5V via jumper.2x LED indicators, easy to monitor the working status. SIM card slot, supports 1.8V/3V SIM card.Baudrate: 2400bps ~ 115200bps (115200bps by default).Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands). Supports SIM application toolkit: GSM 11.14 Release 99.Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32). raspberry pi GPRS Jetson nano SMS communication wireless Internet phone call

ink display, this is a hat for Raspberry Pi, 250 x 122 resolution, with embedded controller, communicate via SPI interface, supports partial refresh. Note:Please check the version of display and use the corresponding demo code No backlight, keeps the contents displayed last for a long time even when power down.Very low power consumption, basically only required for refreshing Compatible with Raspberry Pi 2B/3B/Zero/Null W, comes with development resources and manual (examples of Raspberry Pi/Arduino/STM32),but incompatible with Netatmo. Get soldering points for SPI interface, for connecting with other controller boards such as Arduino/Nucleo, etc.

This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc. Onboard voltage translator, for 3.3V/5V MCUs. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32). waveshare raspberry pi jetson nano paper display electronic ink refresh backlight spi shelf label board price tags

This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc. Onboard voltage translator, for 3.3V/5V MCUs. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32). waveshare raspberry pi jetson nano paper display electronic ink refresh backlight spi shelf label board price tags

Specially design for Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards; Supports SIM application toolkit: GSM 11.14 Release 99 Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc; Supports GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning supports data transferring; Baudrate auto detection (1200bps ~115200bps); Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands) Onboard USB to UART converter for UART debugging; 6x LEDs for indicating the module working status; SIM card slot for 1.8V/3V SIM card RTC with backup batt holder; Comes with development resources and manual (examples for Raspberry Pi/STM32)

This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. No backlight, keeps displaying last content for a long time even when power down.SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Ultra low power consumption, basically power is only required for refreshing Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).Onboard voltage translator, compatible with 3.3V/5V MCUs.

Note:Version 2 please use corresponding demo code .This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/Nucleo, etc.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

【Flagship performance, extremely fast response】Equipped with a 1.6GHz main frequency chip, the KPU computing power is 13.7 times that of the K210 visual module, and the CPU computing power is 8.5 times that of the K210. It supports real-time operation of complex AI models and can easily cope with high-load tasks such as image recognition and voice processing. 【Flexible expansion development】A new 12Pin GPIO interface is added, which is compatible with a variety of sensors and modules; pre-installed GUI program, a large program based on the RTSmart system, contains 30+ functional gameplay, integrates most of the core functions, and each function comes with instructions, so you can experience the fun of AI without programming basics. 【Multi-controller compatibility】Equipped with a serial communication interface, it can be seamlessly connected to various controllers, and supports connection to PC computers, MSPM0, STM32, ESP32, PICO, Raspberry Pi, Jetson, RDK and other mainstream controller development. You can easily output the visual recognition results to an external controller through the serial port without delving into complex visual algorithms, making it easy to create innovative AI projects. 【Multi-function AI visual camera】The K230 visual module is equipped with a 2.4-inch LCD capacitive touch screen with clear display and a 2MP camera for quick debugging and control. The module integrates a serial port, which can easily connect various sensors to expand functions. , with color recognition, road sign recognition, visual line patrol, face recognition, label recognition, QR code and barcode recognition, feature detection, digital recognition and other functions. 【Developers from entry to mastery】Provides original model training tutorials+self-developed upper computer toolkits, compatible with ESP32 ecology, suitable for education, maker and industrial visual project development. Yahboom provides technical Q&A + lifetime firmware updates to help your AI project from prototype to landing without worry!

This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. No backlight, keeps displaying last content for a long time even when power down.Onboard 4x Keys Ultra low power consumption, basically power is only required for refreshing.Onboard voltage translator, compatible with 3.3V/5V MCUs Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano。Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

【Flagship configuration】ORBBEC Astra Pro depth camera, high-definition touch-adjustable 7-inch screen, 6-DOF robotic arm with camera AI camera, YDLIDAR 4ROS TOF ranging lidar, 80mm large-size mecanum wheel, 520 Hall encoding Geared motor, 9600MAH lithium battery pack, durable aluminum alloy body structure. NOTE: Contain the Jetson Nano development board is a Jetson Nano SUB, not official board. 【Exploration Function and Gameplay】Voice-controlled robot driving can be combined with mechanical arms for voice-controlled grabbing and other actions. It supports ORBSLAM2, Rtab-Map 3D, RRT exploration, gmapping and other algorithms for mapping, and navigation methods such as voice, lidar, Rtab-Map 3D and so on. , conventional obstacle avoidance, following, recognition, skeleton detection and other functions can be quickly realized. 【Rosmaster X3 Plus has 4 versions】The difference lies in the main control board, namely Raspberry Pi 5 8GB, Jetson nano, Jetson Orin Nano SUPER/NX SUPER. Please choose according to your needs. The main body of the robot car has been assembled, and users can start programming and operating the robot as long as they complete the installation of accessories. 【Based on ROS operating system】Through Python programming, it can learn robot arm Movelt simulation, drawing and navigation, STM32 underlying development, MaeiaPipe development, path planning and various algorithms. Yahboom provides open source materials, including video courses (English and Chinese) from basic to advanced. 【Cross-platform interconnected control】Dual APP control, real-life first-person controller, Jupyter Lab programming control, and ROS system control., Hersteller: Yahboom

Note:Version 2 please use corresponding demo code .This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Ultra low power consumption, basically power is only required for refreshing Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32) No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32) Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.

【Pi 40PIN GPIO header】Standard Pi 40PIN GPIO extension header, fits Raspberry Pi series boards, and Jetson Nano 【No backlight】800x480, 7.5 inch e-Paper Display for Raspberry Pi no backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing 【SPI interface】7.5 inch E-Ink HAT, SPI interface, for connecting with other controller boards like RPi/Arduino/Nucleo, etc. 【Voltage translator】7.5 inch e-paper touchscreen, onboard voltage translator, compatible with 3.3V/5V MCUs 【Application examples】Waveshare 800x480, 7.5inch e-ink display suitable for price Tags, asset/equipment Tags, shelf labels, conference name tags... 【Development resources and manual】Waveshare 800x480, 7.5inch e-ink display black/white comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

With standard 40PIN GPIO header, for Raspberry Pi series boards. Onboard USB TO UART converter, for serial debugging; Brings the UART control interface, for connecting host boards like STM32; 4x LED indicators, easy to check the module status(Note: This SX1262 868M LoRa HAT uses a private protocol and does not support LoRaWAN. If you need one that supports the LoRaWAN network protocol, please choose Pico-LoRa-SX1262-868M, which can be matched with LoRaWAN gateway SX1302 LoRaWAN Gateway HAT) LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference; Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region Low power consumption features like deep sleeping and Wake on Radio, ideal for batt-powered applications; Customizable communication key which won't be retrieved, greatly improves the security of user data Supports LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment; Supports RSSI signal intensity indicating, for evaluating signal quality, tuning the network Supports wireless parameter configuration, by sending wireless command/data packet, remotely configure or retrieve the module parameter; Supports fixed-point transmission, broadcast, signal channel monitor; Comes with development resources and manual (examples for Raspberry Pi/STM32) sx1262 lora hat raspberry pi spread spectrum modulation 868mhz frequency band

2.13inch E-Ink display HAT, Black and White display color, 3.3V/5V operating voltage. Compatible with Raspberry Pi 5/ 4B/3B+/3B/2B/A+/Zero W/Zero 2 W/Pico W/ Pico 2W Jetson Nano,etc. It is E-Ink Display, which is no backlight required, and it can keep displaying last content for a long time even when power down. Which is suitable for scenarios that require long-term static display (such as electronic labels, information boards). Ultra low power consumption, basically power is only required for refreshing. The standby current is less than 0.01uA (almost none), and the typical refresh power consumption is 26.4mW. Partial refresh takes only 0.3s, and full refresh time takes 2s, which significantly improves the interactive experience and reduces the frequency of full-screen flickering. SPI interface, for connecting with controller boards like Ardu/STM32, etc. Provides Online Pinout and sample programs. Comes with Online Tutorial Usage Guide / Driver Board Circuit Diagram / Demo/ Development Resources/FAQ,etc, Please check: n9.cl/vtl3sa

Triple LCD HAT for Raspberry Pi onboard 1.3inch IPS LCD main screen, with built in ST7789 driver chip, SPI interface communication, supports 65K color display, 240×240 resolution, support clear and vivid color image display, suitable for various application scenarious Onboard dual 0.96inch LCD secondary screens, with built in ST7735S driver chip, SPI interface communication, supports 65K color display, 160×80 resolution, can be used to display key informations, status indicator messages or small graphics Onboard 2x user-defined keys for extended applications, supports customizing the key function, easy to use Onboard standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi series boards, easy to integrate Comes with online Development Resources and Technical Support (Raspberry Pi/VisionFive2/Arduino/STM32, etc.), if you have any question, feel free to contact us

This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs E-Paper Display Panel E-ink Electronic Paper Screen arduino display arduino due epaper display epaper e-ink display

L76K GPS HAT, a Multi-GNSS (Global Navigation Satellite System) module, supports GPS, BeiDou (BDS), GLONASS and QZSS systems, allows multi-system combined or single-system independent positioning. Supports AGNSS function, built-in low-noise amplifier and sound surface filter, provides a good positioning experience of fast, accurate, high-performance. Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi / Jetson / RDK series boards. Supports Multi-GNSS systems: GPS, BeiDou (BDS), GLONASS and QZSS Built-in Low-Noise Amplifier (LNA) for improved reception sensitivity. Built-in SAW Filter for enhanced noise reduction performance Supports AGNSS. UART communication baudrate: 4800~115200bps (9600bps by default). Onboard BAT holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts 4x LEDs for indicating the module operating status. Can provide with online development resources and manual (examples for Raspberry / Jetson / STM32)

【40PIN GPIO header】Standard Pi 40PIN GPIO extension header, fits Raspberry Pi series boards 【Multi-protocol support】Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL, supports RNDIS, NDIS and ECM dial-up, supports GPS, GLONASS, Galileo, BeiDou positioning 【USB Type-A and Type-C interfaces】Onboard USB Type-A and Type-C interfaces, for testing AT Commands, network communication, and so on 【3x USB 2.0 Type-A】Extended 3x USB 2.0 Type-A ports for the host devices such as for Raspberry Pi, Windows PC 【SIM7670G module】Reserved control pads of the SIM7670G module such as UART and USB pins, make it easy to connect with other host boards; SIM card slot, supports 1.8V/3V SIM card 【6x LED indicators】6x LED indicators, easy to monitor the module operating status and USB connecting status 【Development resources and manual 】Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32)