5 1 amplifier

The LM78S40 is a monolithic regulator subsystem consisting of all the active building blocks necessary for switching regulator systems. The device consists of a temperature compensated voltage reference, a duty-cycle controllable oscillator with an active current limit circuit, an error amplifier, high current, high voltage output switch, a power diode and an uncommitted operational amplifier. The device can drive external NPN or PNP transistors when currents in excess of 1.5A or voltages in excess of 40V are required. The device can be used for step-down, step-up or inverting switching regulators as well as for series pass regulators. It features wide supply voltage range, low standby power dissipation, high efficiency and low drift. It is useful for any stand-alone, low part count switching system and works extremely well in battery operated systems.

OPA137 series FET-input operational amplifiers are designed for low cost and miniature applications. In addition to small size (SOT-23-5 and MSOP-8 packages), they provide low input bias current (5pA), low quiescent currrent (220µA/channel), and high open-loop gain (94dB).

The LM741 series are general-purpose operational amplifiers which feature improved performance over industry standards like the LM709. They are direct, plug-in replacements for the 709C, LM201, MC1439, and 748 in most applications.

single supply, rail-to-rail output cmos instrumentation amplifier g:10-50>86db Gehäuse: SO-8 Hersteller: Burr-Brown

These are the first monolithic JFET input operational amplifiers to incorporate well matched, high voltage JFETs on the same chip with standard bipolar transistors ( BI-FET Technology). These amplifiers feature low input bias and offset currents/low offset voltage and offset voltage drift, coupled with offset adjust which does not degrade drift or common-mode rejection. The devices are also designed for high slew rate, wide bandwidth, extremely fast settling time, low voltage and current noise and a low 1/f noise corner.

Output rail-to-rail very low noise operational amplifier Die Operationsverstärker der TS97x-Familie arbeiten mit Spannungen von bis zu ±1,35 V und verfügen über einen Rail-to-Rail-Signalhub am Ausgang. Die TS97x-Geräte eignen sich besonders gut für tragbare und batteriebetriebene Geräte. Durch ihr sehr geringes Rauschen und ihre geringe Verzerrung sind sie ideal für die Audio-Vorverstärkung. Besondere Merkmale Sehr niedriger Rauschpegel: 4 nV/vHz Sehr geringe Verzerrung: 0,003 % Hohe dynamische Eigenschaften: 12 MHz, 4 V/µs

The LMH664X family true single supply voltage feedback amplifiers offer high speed (130 MHz), low distortion (-62 dBc), and exceptionally high output current (approximately 75 mA)at low cost and with reduced power consumption when compared against existing devices with similar performance.

4 IN 1 OUT: Stereo 4-way audio inputs are mixed into a 1-way stereo output, which can directly control headphones or connect to a power amplifier. High current: the quiescent current is about 15 mA and the maximum drive current is 70 mA, which can easily operate various audio devices. STANDARD JACK: With 3.5mm headphone jack, the potentiometer controls the volume of each channel independently without affecting each other. EASY TO USE This stereo audio mixer supports plugs and play, no power supply required, which is convenient and durable and provides good practicality. ALUMINUM CASING: The audio mixer has a robust aluminium alloy housing that has strong interference and lossless signal.

The LMV321, LMV358, LMV324, and LMV324S devices are single, dual, and quad low-voltage output swing. These devices are the most cost-effective solutions for applications where low-voltage operation, space saving, and low cost are needed. These amplifiers are designed specifically for low-voltage (2.7 V to 5 V) operation, with performance specifications meeting or exceeding the LM358 and LM324 devices that operate from 5 V to 30 V.

Überlegener Klang, anspruchsvolles Design - alles in einem. Der ASUS E5702WVA All-in-One-PC verfügt über einen bis zu 13. Generation Intel Core i7 Prozessor für kompromisslose Rechenleistung. Kombiniert mit einem hochwertigen, bassverstärkenden integrierten Subwoofer, hochwertigen Stereo-Lautsprechern und einem Smart Amplifier – ausgestattet mit Dolby Atmos und einer KI-gestützten, bidirektionalen Geräuschunterdrückung – sowie einem makellosen 27-Zoll TÜV Rheinland-zertifizierten FHD NanoEdge-Display, taucht der ASUS E5702WVA Sie in beeindruckende visuelle Erlebnisse und hervorragenden Klang ein, für ultimative Unterhaltung und fokussierte Produktivität.

Bluetooth-Übertragungsmodus (TX): Wandelt kabelgebundenes Audio in Bluetooth-Signale um und überträgt diese zur Ausgabe an Bluetooth-Geräte. Bluetooth-Empfangsmodus (RX): Empfängt Bluetooth-Signale und überträgt sie über eine Bluetooth-Verbindung an kabelgebundenes Audio. Ordinary stereo to wireless Bluetooth speaker. Compatible with all kinds of old audio, optical /AUX connection. Support low latency, restore CD level HIFI stereo quality. Eingebauter wiederaufladbarer Lithium mit 300 mAh und großer Kapazität unterstützt das Laden während der Verwendung. HIFI audio output interface: dual fiber interface + 3.5mm audio interface + for red‑white conversion interface, which can be easily used by different power amplifier and audio equipment.

OPA350 series rail-to-rail CMOS operational amplifiers are optimized for low voltage, single-supply operation. Rail-to-rail input/output, low noise (5nV/vHz), and high speed operation (38MHz, 22V/µs) make them ideal for driving sampling Analog-to-Digital (A/D) converters. They are also well suited for cell phone PA control loops and video processing (75? drive capability) as well as audio and general purpose applications. Single, dual, and quad versions have identical specifications for maximum design flexibility.

High Capacity Range: This load cell is ideal for heavy-duty applications Durable Parallel Beam Structure:Featuring a robust parallel beam structure, this load cell ensures long-lasting performance Versatile Usage:Suitable for scale applications, this load cell amplifier enhances weighing accuracy Compact Design:The sensor's compact size makes it a perfect fit for various

Marking the next phase of the Ultra series, the Ultra 100L V5 provides a lighter, arm-friendly alternative for players looking to balance playability with power. Combining bold design with game-changing performance, its revamped construction and refined geometry deliver a fresh playing experience that continues the excellence of its predecessors. SI3D technology optimizes frame bending, providing an explosive mix of targeted power, spin and control. FORTYFIVE° technology boosts stability for more consistent strokes and greater shot confidence. An expanded sweet spot with longer dwell time amplifies controllable power, while dual-tapered beam construction maximizes power and forgiveness.

1. Adopts high-quality flame-retardant PCB board, stable operation with high temperature resistance, effectively delays component aging and extends the overall service life. 2. Optimized audio circuit layout features low signal distortion, delivering clear and full sound restoration for vocals, treble and bass. 3. Precisely matches the impedance parameters of original speakers. Standard mounting position enables wire connection without additional modification. 4. Standard power amplifier components provide balanced dynamic power output. No distortion at high volume with minimal background noise. 5. Built-in electronic frequency division design actively divides high and low audio bands, improves sound field layering and enhances surround sound effect.

The OP777 , OP727 , and OP747 are precision single , dual, and quad rail-to-rail output single- supply amplifiers featuring micropower operation and rail-to-rail output ranges. These amplifiers provide improved performance over the industry-standardOP07 with ±15 V supplies , and offer the further advantage of true single -supply operation down to 3.0 V , and smaller package options than any other high-voltage precision bipolar amplifier. Outputs are stable with capacitive loads of over 500 pF. Supply current is less than 300 µA per amplifier at 5 V. 500 O series resistors protect the inputs, allowing input signal levels several volts above the positive supply without phase reversal.

The TLV411x single supply operational amplifiers provide output currents in excess of 300 mA at 5 V. This enables standard pin-out amplifiers to be used as high current buffers or in coil driver applications. The TLV4110 and TLV4113 come with a shutdown feature.

700-mW, mono, 5- to 18-V, analog input Class-AB audio amplifier Die LM386M-1 und LM386MX-1 sind Leistungsverstärker die für den Einsatz in Niederspannungsanwendungen Anwendungen. Die Verstärkung ist intern auf 20 eingestellt, um die um die Anzahl der externen Bauteile gering zu halten, aber die Hinzufügung eines externen Widerstandes und eines Kondensators zwischen den Pins 1 und 8 erhöht die Verstärkung auf einen beliebigen Wert von 20 bis 200.

Waveshare GNSS L1+L2+L5 Multi-GNSS & Multi-Frequency Active Antenna, SMA-J Connector Diese aktive GNSS-Antenne unterstützt mehrere Frequenzbänder und Satellitennavigationssysteme und ist für präzise Positionierungsanwendungen konzipiert. Sie deckt die Bänder L1, L2 und L5 ab und ist mit Systemen wie GPS, Galileo, GLONASS und BeiDou kompatibel. Die Antenne verfügt über einen SMA-J-Anschluss, ein robustes Gehäuse mit hoher Temperaturbeständigkeit und ist mit einem Magnetfuß zur einfachen Montage ausgestattet. Das integrierte Low-Noise Amplifier (LNA)-Modul mit 40 ± 2 dB Verstärkung und geringem Rauschfaktor unterstützt eine stabile Signalverarbeitung auch bei schwachen Satellitensignalen. Die Antenne ist besonders für Anwendungen in Smart-Home-Systemen, intelligenter Landwirtschaft sowie bei hochpräzisen Kartenanwendungen geeignet. Diese Antenne kann für eine Vielzahl präziser Ortungsanwendungen genutzt werden, bei denen hohe

The AD8541/AD8542/AD8544 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers featuring very low supply current and 1 MHz bandwidth. All are guaranteed to operate from a 2.7 V single supply as well as a 5 V supply. These parts provide 1 MHz bandwidth at a low current consumption of 45 µA per amplifier. Very low input bias currents enable the AD8541/AD8542/AD8544 to be used for integrators, photodiode amplifiers, piezoelectric sensors, and other applications with high source impedance. The supply current is only 45 µA per amplifier, ideal for battery operation.

These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V (3 V to 26 V for the LM2902), and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage.

Mono Verstärker 1 x 500 WRMS   500 WRMS @ 1OHM 370 WRMS @ 2OHM 200 WRMS @ 4OHM CCi500 is a compact and powerful mono amplifier with a power of 550 Watts RMS @ 1 ohm load. A popular and good power amplifier with high reliability. An amplifier for both amateurs and professionals. Built-in low-pass filter for subwoofers, variable between 35 and 250 Hz. Selectable 12 / 24 dB slope. Built-in protection circuits shut down the amplifier in the event of overloads BASS BOOST adjustable 0 - +6 dB. Damping factor >140 S/N ratio, A weighted: 92 dB Remote bass level control is included High level input with automatic start. RMS output power @ 14,4 V Specifications Number of channels 1 Amplifier class D Output power in 1 ohm 550 W RMS Output power in 2 ohm 370 W RMS Output power in 4 ohm 200 W RMS Damping factor > 140 S/N ratio, A-weighted > 92 dB Frequency range 10 Hz - 2500 Hz Low l...

【XLR auf 1/4 TRS Y-Splitter】:Dient zum Anschluss eines Mikrofons mit XLR-Anschlüssen an einen DV-Camcorder oder ein anderes professionelles Audiogerät mit einer 6,35-mm-Buchse. 【Exzellente Klangqualität】:XLR auf Dual 1/4 TRS Mikrofonkabel sind mehrlagig abgeschirmt, um Signalstörungen zu minimieren, eine stabile Übertragung zu gewährleisten und Brummen und Rauschen zu minimieren. 【Hochwertige Materialien】: Flexibler PVC-Mantel, robustes Druckguss-Metallgehäuse mit hochbelastbaren vergoldeten Anschlüssen, die eine gute Signalverbindung und ein einfaches An- und Abstecken ermöglichen. 【Plug and Play】: Dual 1/4 auf XLR-Mikrofonkabel sind ideal für die Lösung einer Vielzahl von Audioproblemen und können in beide Richtungen verwendet werden, geeignet für die Aufteilung oder Kombination von Audiosignalen. Plug and Play, einfach zu bedienen 【Widely used】: XLR to 6.35 mm cables are ideal for combining audio equipment: microphones, digital interfaces, laptops, smartphones, amplifiers, recording equipment, loudspeakers, Hi-Fi audio systems, mixing consoles.

Spannung: 6V Typ: Li-MnO2 Farbe: Gelb Kapazität: 2900mAh Leistung: 17.4Wh Passend für folgende Gerätemodelle: Allen Bradley 1747-L511 SLC 5/01 Controller 1Kb Memory Allen Bradley 1747-L514 SLC 5/01 Controller 4Kb Memory Allen Bradley 1747-L524 SLC 5/02 Controller 4Kb Memory Allen Bradley 1747-L531 SLC 5/03 (with 8Kb user instruction capacity) Allen Bradley 1747-L532 SLC 5/03 Controller 16Kb Memory Allen Bradley 1747-L541 SLC 5/04 Controller 16Kb Memory Allen Bradley 1747-L542 SLC 5/04 Controller 32Kb Memory Allen Bradley 1747-L542P SLC 5/04 Controller 32Kb Memory Allen Bradley 1747-L543 SLC 5/04 Controller 64Kb Memory Allen Bradley 1747-L551 SLC 5/05 Central Processor Unit 16Kb Memory E-Net Processor Allen Bradley 1747-L552 SLC 5/05 Central Processor Unit 32Kb Memory E-Net Processor Allen Bradley 1747-L553 SLC 5/05 Central Processor Unit 64Kb Memory E-Net Processor Allen Bradley 1766-L32xxx Allen Bradley BA 1764-LxP Allen Bradley MicroLogix 1400 Allen Bradley MicroLogix 1500 Allen Bradley SLC-500 GE FANUC Amplifier ALPHA iSV G

The TLE208x series of JFET-input operational amplifiers more than double the bandwidth and triple the slew rate of the TL07x and TL08x families of BiFET operational amplifiers. The TLE208x also have wider supply-voltage rails, increasing the dynamic-signal range for BiFET circuits to ±19 V. On-chip zener trimming of offset voltage yields precision grades for greater accuracy in dc-coupled applications. The TLE208x are pin-compatible with lower performance BiFET operational amplifiers for ease in improving performance in existing designs.

High-gain active amplifier with low-noise figure for precise multi-constellation tracking Wide-beam circular polarisation improves reception of satellites near the horizon Lightweight elongated body allows easy integration into portable or fixed devices SMA connector supports both RF feed and DC bias power through coaxial cable Rugged IP67 sealing ensures reliable performance in rain, dust, and harsh field conditions

A unique input circuit allows the HV9120 to self-start directly from a high voltage input, and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50 W or more, which can still be over 80% efficient at outputs of 1.0 W or less. The wide dynamic range of the controller system allows designs with extremely wide line and load variations with much less difficulty and much higher efficiency than usual. The exceptionally wide input voltage range also allows better usage of energy stored in input dropout capacitors than with other PWM ICs. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0 mW. . 10 ... 450 V input voltage range . 1.0 MHz clock . >20:1 dynamic range @ 500 KHz . 49% Maximum duty cycle version . Low internal noise Technical Data: . Input Voltage: 10 ... 450 V . Feedback: ±2 % . Duty Cycle: 49% . Switch: external

The AD8671/AD8672/AD8674 are very high precision amplifiers featuring very low noise, very low offset voltage and drift, low input bias current, 10 MHz bandwidth, and low power consumption. Outputs are stable with capacitive loads of over 1000 pF. Supply current is less than 3 mA per amplifier at 30 V. The AD8671/AD8672/AD8674's combination of ultralow noise, high precision, speed, and stability is unmatched. The MSOP version of the AD8671/AD8672 requires only half the board space of comparable amplifiers.

The AD8603/AD8607/AD8609 are single/dual/quad micro-power rail-to-rail input and output amplifiers, respectively, that feature very low offset voltage as well as low input voltage and current noise. These amplifiers use a patented trimming technique that achieves superior precision without laser trimming. The parts are fully specified to operate from 1.8 V to 5.0 V single supply or from ±0.9 V to ±2.5 V dual supply. The combination of low offsets, low noise, very low input bias currents, and low power consumption makes the AD8603/AD8607/AD8609 especially useful in portable and loop-powered instrumentation.

[NT USB Mini] brings the pristine sound quality of RØDE’s world-class studio mics to a compact, easy-to-use USB microphone. Features a sound signature tailored specifically to deliver warmth and presence in your recordings and will sound amazing on dialogue, vocals, guitar – anything you throw in front of it. The studio-grade headphone amplifier and high-quality 3.5mm headphone output, complete with precision volume control, allows you to easily monitor your audio. Unique integrated digital signal processing gives access to a noise gate, compressor, APHEX Aural Exciter and Big Bottom (accessed via free RØDE Connect software for your computer). [SC19] is a high-quality 1.5m Lightning Accessory Cable (USB-C to Lightning) designed to connect MFi-certified USB-C microphones to iOS devices. NOTE: This cable will not charge or sync your iOS device. All RØDE cables and adapters are manufactured to the highest tolerances, and feature rugged connectors and strain relief sleeves for years of reliable use.