Car Hifi Endstufe

Leistung an 2Ohm 1x 250Watt, Leistung an 4Ohm 1x 125Watt

1400 Wrms@ 1Ohms, Frequency Response (-3db) 10 Hz to 230 Hz,

6 x 150 Wrms @ 4Ohm / Kanal 5+6: 1000Wrms @ 1Ohm

Leistung: 1 x 500 W RMS @ 4 Ohm, Leistung: 1 x 850 W RMS @ 2 Ohm, Leistung: 1 x 1000 W RMS @ 1 Ohm, Abmessungen: 400x58x206 mm

Leistung: 1 x 250 W RMS @ 4 Ohm, Leistung: 1 x 500 W RMS @ 2 Ohm, Frequenzbereich: 10Hz - 300Hz, Abmessungen: 406x50x230 mm

Class D 4-Channel, 4 x 40 / 75 Watt RMS an 4 / 2 Ohm

1 Ch: 5000 W (1 ?), Link-Modus 1 Ch: 10000 W (2 ?), Abmessungen: 644 x 280 x 65,5 mm

BLX44, MARINE 4 CHANNEL AMPLIFIER, 1 Ohm RMS n/a, 2 Ohm RMS 240W x 4, 4 Ohm RMS 120W x 4, 4 Ohm Bridged 480W x 2

- 2-Kanal Class-AB-Weitbereichsverstärker für Lautsprecher und Subwoofer - Brückenmodus für Subwoofer oder Gehäuse - Aktive Frequenzweiche: Hochpass und Tiefpass variabel von 50 bis 120 Hz - Signal-/Rauschabstand über 73 dB - THD + Rauschen bei 0,2% - Eingangsempfindlichkeit von 200 mV bis 6 V - Maße: Höhe 52 mm, Länge 220 mm, Breite 135 mm

Variable Bass Boost 0-12dB @ 40Hz, Tested Voltage 14.4

KAC-M1814m Compact 4-Channel Digital Amplifier, 4 channel digital (Class D) amplifier, Maximum output power 400W, 4 x 45W @ 4ohm (CEA-2006 standard), RCA / Speaker level input, Signal sensing turn-on/off, Variable Low- & High-Pass filter, Compact size (145 x 45 x 99mm)

X802-5, X-Series, Class D 5-Kanal Endstufe, Nennausgangsleistung (4?, 14,4 V) 50 W x 4 (20 Hz ~ 20000 Hz, 1% Klirr)

1x 2000 Watt RMS @ 1 Ohm an 14,4V

4x 160W (RMS) @ 4Ohm 4x 175W (RMS) @ 2Ohm 2x 350W (RMS) @ 4Ohm (mono)

1x200 Watt RMS@4Ohm an 14,4V, 2x75 Watt RMS@4Ohm , 2x120Watt RMS@2Ohm

Endstufe - Kanäle: 1-Kanal (Monoblock) - Max. 300 W Ausgangsleistung pro Kanal - Tiefpass: 30 Hz - 250 Hz - Subsonicfilter: 10 Hz - 50 Hz - Maße: H50 mm x B150 mm x T220 mm

VFL- 350.4,2 Ohm Stereo or 4 Ohm Mono Stable High Power 4 Channel Full Range Amplifier, RMS Power at 4 Ohm: 175W x 4ch, RMS Power at 2 Ohm: 250W x 4ch, RMS Power at 4 Ohm Mono: 500W x 2ch

1x 3300 Watt RMS @ 1 Ohm an 14,4V

Performance 300 W RAW 2 Channel Amplifier 2 x 70 Watt P20 is a small and powerful amplifier with a peak power output of 2 x 70 Watts. In 4 ohm mono bridge-connection, it puts out all of 200 Watts. Built-in low-pass filter for subwoofers, variable between 50 and 500 Hz. The high-pass filter is also variable between 50 and 500 Hz. Built-in protection circuits shut down the amplifier in the event of overloads. High level input with AUTO-start function makes it easier to connect to factory installed head units. Bass EQ function in two steps, +6dB or +12 dB. SQ tuned in England! Specifications Number of channels 2 Amplifier class AB Mono bridge mode 4 ohm 200 Watt Output power in 2 ohm 2 x 100 Watt Output power in 4 ohm 2 x 70 Watt vid 0,1% THD Damping factor > 80 S/N ratio, A-weighted > 95 dB Frequency range 10 Hz - 30 kHz Input sensitivity 0,25 - 5 Volt Input impedance 22 kohm...

RMS AT 2 OHM STEREO: 300Wx2CH, MAX POWER: 2000W, S/N RATIO: >100DB

BP500.2, 2 CHANNEL AMPLIFIER WITH BUILT-IN OEM LINE CONVERTER, HPF, LPF, Band Pass Crossovers (12dB ~ 24dB), Bass Boost 0dB ~ 12dB @ 45Hz

1 x 1.000 Watt RMS @ 1 ?, 1 x 800 Watt RMS @ 2 ?, 1 x 450 Watt RMS @ 4 ?

Stereo 1 Ohm: 2x 92 W, Stereo 4 Ohm: 2 x 171 W, Stereo 2 Ohm: 1x 342 W

Class D Monoblock, 1700 Watt RMS @ 1 Ohm, 10-220Hz Frequency, 91dB SNG