esp32 development board

Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with an onboard antenna. Supports switching to use external antenna via resoldering an onboard resistor Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Supports capacitive touch function controlled via I2C interface, with interrupt support. Onboard TF card slot for external TF card storage of pictures or files Onboard 1.43inch AMOLED display, QSPI interface, 466 x 466 resolution, 16.7M color. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc. Onboard PCF85063 RTC chip with reserved SH1.0 RTC batt header (supports charging) for RTC function requirement. Onboard RST button and programmable BOOT button for easy custom function development. Onboard 3.7V MX1.25 Lithium batt recharge/discharge header Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use. Onboard UART and I2C SH1.0 4PIN connector, reserved 2 x 14PIN 1.27mm pitch headers, adapting multiple GPIO interfaces.

Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Onboard 2.8inch LCD display, 240x320 resolution, 262K color. Adapting UART, I2C and some IO interfaces, integrates full-speed USB port Onboard speaker, QMI8658 6-axis sensor, RTC sensor, TF card slot and batt recharge management module, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

ESP32-S3-Touch-LCD-1.85C-BOX is a microcontroller development board with Smart Speaker Box(batt included) with 2.4GHz Wi-Fi and BT BLE 5 support, integrates high-capacity Flash and PStatic RAM Onboard 1.85inch LCD display which can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, it is suitable for the quick development of the HMI and other ESP32-S3 applications. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM. Onboard 1.85inch LCD display, 360x360 resolution, 262K color. Supports capacitive touch controlled via I2C interface, with interrupt support Adapting UART, I2C and some IO interfaces. Onboard audio decoder, Microphone, RTC sensor, TF card slot and batt recharge management module, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

There are several options for this item, this option is without Touch function and header Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with an onboard antenna. Supports switching to use external antenna via resoldering an onboard resistor Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 1.91inch AMOLED display, 240 × 536 resolution, 16.7M color Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc. Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use Onboard 3.7V MX1.25 lithium batt recharge/discharge header. Onboard TF card slot for external TF card storage of pictures or files

V4 Development Board Expansion Kit: This ready-to-use LoRa 32 V4 development board expansion kit requires no installation and is plug-and-play. While retaining the powerful core functions of its predecessor, it features comprehensive optimizations in hardware design, power management, and scalability, significantly enhancing the development experience. The kit includes a built-in touchscreen for real-time monitoring and convenient control of sensor data; a standard soft whip antenna to enhance LoRa gain and expand application range; and an integrated L76K GNSS module for precise positioning, perfectly adapting to various IoT Strong Connectivity: Our development board is equipped with a dedicated soft whip antenna, and the reserved LoRa U.FL interface ensures stable, long-range wireless communication. The newly added SH1.25-8 pin GPS interface facilitates the expansion of positioning functions. In addition, it has a rich set of external interfaces. The size and pin arrangement of this development board are compatible with LoRa 32 V2 and V3 versions, and the additional external pins enhance its scalability Upgraded Development Board: ESP32-S3 and LoRa SX1262, More Powerful, Longer Range: Utilizing the latest ESP32-S3R2 with 2MB PSRAM and 16MB Flash, paired with the Semtech SX1262, it achieves high-power LoRa transmission of 27dBm. It supports ultra-low power 20μA sleep mode and integrated solar charging, and features a 2800mAh Li-ion battery, making it ideal for long-term battery-powered Meshtastic and LoRaWAN applications Upgraded Development Board: ESP32-S3 and LoRa SX1262, More Powerful, Longer Range: Utilizing the latest ESP32-S3R2 with 2MB PSRAM and 16MB Flash, paired with the Semtech SX1262, it achieves high-power LoRa transmission of 27dBm. It supports ultra-low power 20μA sleep mode and integrated solar charging, and features a 2800mAh Li-ion battery, making it ideal for long-term battery-powered Meshtastic and LoRaWAN applications Strong Compatibility and Developer-Friendly Design: This ESP32 LoRa Arduino development board supports Arduino. The development environment can be easily integrated into existing projects and compatible devices such as the Raspberry Pi. With 2MP of internal SRAM and 16MB of external Flash, it can easily handle complex firmware and facilitate program download and debugging, making it ideal meshtastic devices for both novice and experienced developers Note: V4 Board The screw securing the screen in the upper left corner is a special plastic screw, different from the other three screws. This screw prevents interference with the 2.4GHz radio frequency and is not a product defect. If you encounter a black screen or motherboard failure: This is because the stable system does not support firmware V4. You can try using version 2.7.11 or 2.7.12. Please flash the firmware first. This problem is most likely caused by flashing the wrong firmware Note: V4 Board Regarding firmware updates, the ESP32 requires BOOT mode in some cases; this is a characteristic of the chip. Instructions are available in the FAQ and online documentation on the official website. The battery interface is standard size. Meshtastic version 2.7.12 had Bluetooth connectivity issues; these problems were fixed in version 2.7.13, which also removed power limitations in most regions. The downgraded version 2.7.11 imposed numerous limitations on RF power. △ Note: Local maps require an SD card expansion. This expansion feature is still under development

ESP32-C6-Touch-LCD-1.47,Integrates LCD display, onboard TF card slot and multiple peripheral interfaces ESP32-C6 suitable for AIoT applications.Equipped with a high-performance 32-bit RISC-V processor and a low-power 32-bit RISC-V processor, the main frequency is up to 160 MHz, Powerful AI Computing Capability & Reliable security features Wi-Fi 6 and BLE 5 support.ESP32-C6 integrates 2.4GHz Wi-Fi 6 (802.11 ax/b/g/n) with 40 MHz of bandwidth support, its Bluetooth Low Energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh Pin Definition.Supports the expansion of multiple peripherals via GPIO header AXS5106L Touch Driver

1.8inch Capacitive Touchscreen: The board features a 1.8-inch capacitive touchscreen with excellent touch sensitivity, offering a responsive display for a variety of interactive applications. ESP32-S3 Chip: Powered by the ESP32-S3, the board delivers high-performance dual-core processing capabilities with built-in hardware support for AI and machine learning tasks. Dual Wireless Connectivity: Supports both Wi-Fi and Bluetooth 5.0, enabling seamless communication with other devices for Internet of Things (IoT) and remote control applications. Audio and Voice Integration: Equipped with an audio decoder and microphone, this board allows integration of voice recognition and audio playback, making it suitable for smart audio applications. Flexible Power Supply: The board can be powered via USB Type-C or a 3.7V BAT, providing flexibility for portable or stationary projects.

Powerful ESP32-S3 AI Core: Featuring a dual-core Xtensa LX7 processor with integrated AI acceleration capabilities, ideal for machine learning...

Powerful ESP32-S3 AI Core: Featuring a dual-core Xtensa LX7 processor with integrated AI acceleration capabilities, ideal for machine learning...

Built with ESP32-S3 dual-core processor up to 240MHz, plus 16MB Flash and 8MB Pstatic ram for smooth GUI running Supports 2.4GHz Wi-Fi and BT BLE 5, with onboard antenna for wireless connectivity Onboard 4inch 480x480 pixel touch display, 65K color, with 5-point capacitive touch via I2C interface Features flexible clock and independent module power control for low power consumption in different scenarios Includes multiple peripheral interfaces for quick development of smart panels, home gateways, and industrial control systems

Powerful ESP32-S3 AI Core: Featuring a dual-core Xtensa LX7 processor with integrated AI acceleration capabilities, ideal for machine learning...

The ESP32-S3-LCD-1.47B features a high-performance Xtensa 32-bit LX7 dual-core processor, running at up to 240MHz, ideal for advanced HMI applications. It supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) with an onboard antenna, ensuring reliable wireless connectivity. The board is equipped with 512KB SRAM, 384KB ROM, 16MB Flash, and 8MB PSRAM, providing sufficient storage for efficient operation and program execution. It includes a 1.47-inch LCD display with 172×320 resolution and 262K colors, alongside a 6-axis IMU for motion sensing and gesture detection. The ESP32-S3-LCD-1.47B features multiple I/O interfaces, a TF card slot for external storage, a batt charging module, and low-power modes for versatile and efficient use in various scenarios.

【High-Performance RISC-V Core】Powered by a 32-bit RISC-V HP processor (up to 160MHz) and an LP processor (up to 20MHz). 【Wi-Fi 6 & BLE 5.3】Supports 2.4 GHz Wi-Fi 6 (802.11ax) and Bluetooth 5.3 (LE) with an onboard antenna for superior connectivity. 【High-definition Display】Integrated 1.47-inch LCD (172×320 resolution, 262K colors), ideal for crisp and vivid GUI applications. 【Generous Memory & Storage】Built-in 512KB HP SRAM, 4MB Flash, and a Micro SD card slot for external storage expansion. 【Ultra-Low Power】Flexible clock settings and multiple power modes, tailored for battery-operated IoT scenarios.

3. Lebendiges 1,28--LCD-Display: Ausgestattet mit einem runden 1,28--LCD-Bildschirm bietet dieses esp32-s3-Entwicklungsboard gestochen scharfe und farbenfrohe Bilder. Erleben Sie klare Zeitanzeigen, dynamische Animationen und interaktive Inhalte - alles in einem lebendigen, auffälligen Format. 2. Vielseitiger Desktop-Begleiter: Dieser intelligente Desktop-Roboter ist mehr als nur ein Gadget, dient als multifunktionales Schreibtisch-. Sie die Uhrzeit an, führen Sie animierte GIFs aus oder erkunden Sie kreative Spielmodi, um Ihren Arbeitsplatz mit jedem lebendiger und ansprechender zu . 1. Fortschrittliche ESP32-S3-Leistung: Dieser -Voice-Chat-Roboter mit ESP32S3N16R8-Chip bietet effiziente Verarbeitung und fortschrittliche -Funktionen. Genießen Sie nahtlose -Konversationen, intelligente Uhrfunktionen und eine breite Palette interaktiver Funktionen - alles in einem kompakten Gerät. 4. -Voice-Chat-Funktion: Dieser Mini-Roboter als unterstützt -gestützte Sprachgespräche und ermöglicht personalisierte Interaktionen und intelligente Antworten. ist in ausgewählten Regionen kompatibel und bringt dank freihändiger Kommunikation ein neues Maß an Komfort und Spaß in Ihren Alltag. 5. Kreatives Geschenk und Lernhilfe: Ideal für Technikbegeisterte, Studierende oder alle, die sich für interessieren. Dieser intelligente Assistenzroboter ist sowohl ein praktisches Werkzeug als auch ein Gesprächsthema. Seine innovativen Funktionen machen ihn zu einem einzigartigen Geschenk oder einer Lernhilfe für die Erforschung künstlicher Intelligenz.

Advanced AI Capabilities: Equipped with the ESP32-S3 chip, this development board is perfect for robotics and AI learning projects, offering...

für ESP32 nodemcu Entwicklungsplatine integriert Antennen- und Hochfrequenzbalance, Leistungsverstärker, rauscharme Verstärker, Filter und Energiemanagementmodul. Das für ESP32 Modul wird zusammen mit dem 2,4-GHz-Dual-Form-WLAN- und Bluetooth-Chip verwendet. Es verwendet 40nm Low Power Technologie. Die Stromversorgung und die Radiofrequenzeigenschaften sind gut und können auf verschiedene Anwendungen erweitert werden. Leistungsstark, unterstützt LWIP-Protokoll, freeRTOS. Unterstützt AP, STA, AP + STA. für ESP32 WiFi mit cp2102 Entwicklungsboard bietet Prototyping durch einfache Programmierung über Lua-Skript.

The ESP32-S3-LCD-1.47B features a high-performance Xtensa 32-bit LX7 dual-core processor, running at up to 240MHz, ideal for advanced HMI applications. It supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) with an onboard antenna, ensuring reliable wireless connectivity. The board is equipped with 512KB SRAM, 384KB ROM, 16MB Flash, and 8MB PSRAM, providing sufficient storage for efficient operation and program execution. It includes a 1.47-inch LCD display with 172×320 resolution and 262K colors, alongside a 6-axis IMU for motion sensing and gesture detection. The ESP32-S3-LCD-1.47B features multiple I/O interfaces, a TF card slot for external storage, a batt charging module, and low-power modes for versatile and efficient use in various scenarios.

Adopts ESP32-S3R2 chip with high-performance Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz Built in 512KB S-RAM, 384KB ROM, 2MB of PS-RAM, and 16MB Flash memory. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, featuring superior RF performance Equipped with the SIM7670G cellular module, supports 4G Cat-1 networking, GNSS positioning and other functions. Onboard USB switching IC and DIP switch for switching to use the USB interface of SIM7670G, suitable for connecting with PC for dial-up internet or debugging of SIM7670G module Onboard batt charging, solar charging, power management, batt capacity measurement, and related protection circuits, supports USB and solar charging with real-time batt capacity measurement. Onboard batt holder (batt is NOT included), adapting VBAT pin header for connecting to external 3.7V batt, with anti-reverse protection Rich peripheral interfaces such as camera interface, TF card slot, USB port, 38PIN header, etc., easy to expand and achieve various functions. Onboard multiple DIP switches for camera on/off, switching USB channels to avoid interface conflict, and setting power on/off for some circuits to reduce power consumption

It should be noted that This is a wearable watch-style development board, it is not a standard pre-configured smartwatch. It is a DIY module that requires customers to develop their own application to fully utilize its functions. This product is intended for tech enthusiasts, developers or programming enthusiasts, makers, etc. Powerful Microcontroller: Using ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor (Ups to 240MHz). Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 32MB Flash memory. Integrated Multi Functions: 1) AMOLED Display: 2.06inch AMOLED capacitive touch display. Driver chip: CO5300 (QSPI) + FT3168 touch (I2C). 2) Motion Sensing: QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Developer-Friendly Design: 1) Debug Interface:Lead out I2C/UART/USB pads (need to be soldered). 2) Storage Expansion: Micro SD card slot (simplifies data logging development). 3) Wearable Design: Detachable watch straps for easy replacement and convenient matching with different styles. AI Support: Supports offline voice recognition and AI Speech Interaction. Allows access to online large model platforms such as DeepSeek, Doubao, ChatGPT, etc.

Powerful ESP32-S3: It is a RLCD AIoT development board based on ESP32-S3, adopts high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built-in 512KB Static RAM, 384KB ROM, with integrated 16MB Flash +8MB PS RAM., providing ample computing power for various AIoT applications. Dual-Mode Communication: It supports 2.4GHz Wi-Fi and Bluetooth 5 (LE) dual-mode communication, with a built-in antenna for stable signal transmission, easily enabling device networking and data transfer, adapting to various wireless interaction needs. 4.2inch RLCD Reflective Screen: Onboard 4.2inch RLCD, 300 × 400 resolution, features reflective imaging and no backlight required. Achieving extremely low power consumption, and eliminating glare in bright environments, providing clear and transparent display. The display effect is close to that of an e-ink screen, with a faster refresh rate, balancing visual experience and energy efficiency. Abundant Peripherals + Flexible Expansion: Integrated with audio codec circuit, dual microphones, speaker, SHTC3 high-precision temperature and humidity sensor, TF card slot, R T C header, and Lithium Batt charging and discharging management circuit, etc. Reserved USB, UART, I2C, and multiple GPIO interfaces for easy expansion. Dual Batt Life Modes for Mobile and Fixed Scenarios: Onboard 18650 Lithium Batt holder and R T C backup Batt header. The R T C backup Batt header supports a rechargeable RTC Batt and dual modes of main Batt power supply and RTC independent power supply (Note: Batt is not included.)

High-Performance ESP32-S3 Processor-- Equipped with a dual-core Xtensa LX7 CPU with a clock speed of up to 240MHz, built-in 512KB SRAM, 384KB ROM, stacked 8MB PSRAM and external 16MB Flash, supports 2.4GHz Wi-Fi and Bluetooth 5 (LE), easily handling complex applications and AI calculations. 1.54inch IPS LCD Display-- Onboard 1.54inch LCD display for clear color picture display, 240 × 240 resolution, 262K color. It perfectly presents rich visual content such as AI dialogue, electronic photo album, video playback, and game animation. Intelligent AI Voice Interaction-- Supports mainstream online large model platforms such as Xiaozhi AI and DeepSeek. It features an onboard dual microphone array and ES7210/ES8311 audio codec chip, providing voice wake-up, conversation interruption, noise reduction, and echo cancellation functions for a smooth and intelligent dialogue experience. Multifunctional Sensors and Expansion-- Integrated six-axis inertial measurement unit (3-axis accelerometer + 3-axis gyroscope) to support motion detection; onboard Micro SD card slot for storage expansion; Type-C interface for convenient power supply and data transmission; additional I2C and UART pads for peripheral connections. Secondary Development-- The factory firmware includes built-in AI dialogue, audio and video playback, electronic photo album, text reading, and fun games. It can be used directly as a smart chat toy, or developers can perform personalized programming and in-depth customization.

ESP32-S3-Touch-AMOLED-2.41-B, with case, better protection. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM. Onboard UART and I2C SH1.0 4PIN connectors, with a reserved 34PIN 2.54mm pitch GPIO header for expandability Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with an onboard antenna. The device allows switching to an external antenna by resoldering an onboard resistor. Supports capacitive touch function, controlled via I2C interface, with interrupt support Onboard 2.41inch AMOLED display, QSPI interface, 600 450 resolution, 16.7M color. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for motion gesture detection, step counting, and more Onboard PCF85063 RTC chip with a reserved SH1.0 RTC batt header (supports charging) for RTC functionality. Onboard RST button, along with programmable BOOT and PWR buttons for customizable functionality and flexible development Onboard 3.7V MX1.25 Lithium batt recharge/discharge header. Onboard TF card slot, enabling external storage for pictures or files.Onboard USB Type-C port for power supply, program downloading, and debugging, making development more convenient

Adopts ESP32-C6-WROOM-1-N8 module with RISC-V 32-bit single-core processor, up to 160MHz main frequency, built-in 8MB Flash Integrated WiFi 6, Bluetooth 5 and and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance Type-C connector, easier to use Onboard CH343 and CH334 chips can meet the needs of USB and UART development via a Type-C interface Rich peripheral interfaces, compatible with the pinout of the ESP32-C6-DevKitC-1-N8 development board, offers strong compatibility and expandability.Castellated module allows soldering directly to carrier boards

V4 Development Board: The LoRa 32 V4 is a brand-new upgraded version of the classic LoRa development board. While maintaining the powerful features of its predecessor, the V4 version features comprehensive optimizations in hardware design, power management, and scalability. Suitable for IoT applications such as smart cities, agricultural monitoring, smart homes, industrial control, security systems, and wireless meter reading, it provides developers with a more efficient and flexible development experience. Powerful Connectivity: Our development board features dedicated 2.4GHz metal spring antennas and rubber stick antennas for Wi-Fi and Bluetooth, along with a reserved U.FL interface for LoRa, ensuring stable and long-range wireless communication. A new SH1.25-8-pin GPS interface facilitates positioning expansion. The board's form factor and pinout are compatible with the LoRa 32 V2 and V3 versions, while additional external pins enhance scalability. Hardware Upgrade: Our V4 development board is equipped with the ESP32-S3R2 and SX-1262 chipsets, a 0.96-inch display ideal for displaying debugging information and battery charge, 2MP internal SRAM, and an external 16MB SRAM. Flash memory can easily handle complex firmware. The high-power version of LoRa transmit power is increased to 27±1dBm, ensuring stable communication. Continuing its low-power design, the GNSS interface power is less than 20uA. The PC case fully surrounds the screen and integrates the 2.4GHz antenna, enhancing overall strength and integration. Perfectly compatible with V3 and V4 development boards: kit features a built-in 3000mAh battery and comes with a unique N39 protective case.case is compatible with both V3 and V4 development boards. You can easily charge it via a Type-C interface that integrates voltage regulation, ESD protection, and short-circuit protection. Additionally, you can use the SH1.25-2P solar connector, which is compatible with solar panels up to 4.4-6V/540mA. This innovative design ensures your WiFi LoRa 32 (V4) is always fully charged and ready to use. With its charge/discharge management, overcharge protection, battery level detection, and automatic USB/battery switching, this ESP32 kit is an ideal choice Strong compatibility and developer-friendly design: This ESP32 LoRa Ar duino development board supports Ar duino. The development environment can be easily integrated with existing projects and compatible devices such as for Raspberry Pi. With 2MP of internal SRAM and 16MB of external Flash, it can easily handle complex firmware and facilitate program download and debugging, making it an ideal choice for both novice and experienced developers. Note: The securing screw in the upper left corner of the screen is a special plastic screw, unlike the other three. This screw prevents interference with the 2.4GHz radio frequency and is not a product defect.If you encounter a black screen or motherboard malfunction: This is because the stable system does not support firmware V4. You can try using version 2.7.11 or 2.7.12. Please flash the firmware first. This issue is most likely caused by flashing the wrong firmware Note:Regarding firmware updates, the ESP32 requires the use of BOOT mode in some cases; this is a chip characteristic. This is mentioned in the FAQ on the official website and online documentation. Regarding the battery interface, it is a standard size. Meshtastic's 2.7.12 Bluetooth connectivity had flaws; these issues have been fixed in 2.7.13, which also removed power limitations in most regions. The downgraded version 2.7.11 imposed numerous restrictions on RF power.

ESP32-S3-Touch-AMOLED-2.41, standard version, without case. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM. Onboard UART and I2C SH1.0 4PIN connectors, with a reserved 34PIN 2.54mm pitch GPIO header for expandability Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with an onboard antenna. The device allows switching to an external antenna by resoldering an onboard resistor. Supports capacitive touch function, controlled via I2C interface, with interrupt support Onboard 2.41inch AMOLED display, QSPI interface, 600 450 resolution, 16.7M color. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for motion gesture detection, step counting, and more Onboard PCF85063 RTC chip with a reserved SH1.0 RTC batt header (supports charging) for RTC functionality. Onboard RST button, along with programmable BOOT and PWR buttons for customizable functionality and flexible development Onboard 3.7V MX1.25 Lithium batt recharge/discharge header. Onboard TF card slot, enabling external storage for pictures or files.Onboard USB Type-C port for power supply, program downloading, and debugging, making development more convenient

Equipped with a ESP32-C6 high-performance RISC-V 32-bit processor with up to 160MHz operating frequency.Integrated Wi-F 6, B T 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wire-less communication, provides superior RF performance, with onboard antenna. Onboard 512KB HP Static RAM, 16KB LP Static RAM, 320KB ROM and external 16MB Flash memory.Onboard 1.8inch capacitive touch AMOLED display for clear color picture display, 368 × 448 resolution, 16.7M color. Onboard 1.8inch capacitive touch AMOLED display for clear color picture display, 368 × 448 resolution, 16.7M color.Built-in SH8601 display driver and FT3168 / FT6146 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Onboard PWR and BOOT programmable buttons for easy custom function development. Onboard TF card slot for expanded storage, fast data transfer, and transfer flexibility, suitable for applications such as data recording and media playback, simplifying circuit design.

Im Vergleich zu LoRa32 V3 bietet LoRa 32 V4 umfassende Verbesserungen in der Handwerkskunst und verbesserte Leistung. Dieses LoRa V4 Board wird zerlegt geliefert, dann ist Löten erforderlich. Wenn Sie Lora32 v4 Entwicklungsplatine verwenden, müssen Sie 2 Stück zusammen verwenden, einen Empfang und ein anderes Senden. Sie erhalten: 1 x esp32 lora V4, 1 x 915 MHz Lora-Antenne und 1 x 2-poliger 1,25-mm-Anschluss, nicht ausgestattet mit Li BAT, GPS oder anderem Zubehör. Es ist möglich, das Datenblatt bereitzustellen, wenn Sie das sechste Bild überprüfen.

Supports touch control via I2C interface, with interrupt support. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 2.8inch LCD display, 480x640 resolution Adapting UART, I2C and some IO interfaces, integrates full-speed USB port. Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and batt recharge management module, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

The ESP32-S3-ePaper-1.54 is an e-Paper AIoT development board, equipped with ESP32-S3 microcontroller, adopts high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Suitable for Voice Interaction and e-Reader, etc Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built-in 512KB Static RAM, 384KB ROM, with integrated 8MB Flash and 8MB PS-RAM. Onboard 1.54inch e-paper display, 200 × 200 resolution, features high contrast and wide viewing angle. Onboard audio codec chip, supports voice capture and playback, enabling AI voice interaction applications. Supports AI Speech Interaction: Allows access to online large model platforms such as DeepSeek, Doubao, etc. Onboard PCF85063 RTC chip and SHTC3 temperature & humidity sensor for accurate RTC management and environmental monitoring. Onboard TF card slot for external storage of images or files. Onboard programmable PWR and BOOT side buttons for customized function development. Reserved 2 × 6 2.54mm pitch pin header for convenient external expansion. Supports ESP-IDF, Ardui IDE: Comprehensive SDK, dev resources, and tutorials to help you easily get started, please check: n9.cl/tseakv

Das Entwicklungsboard ESP32-2432S032, das die Entwicklungsvorteile des Internets der Dinge voll ausschöpft, ist ein echtes Entwicklungstool für das Internet der Dinge mit einem steuerbaren Bildschirm, der für die APP-Fernsteuerung und Fernumgebungsdaten verwendet werden kann Sammlung und Fernbedienung. Datenfusion, Remote-Parametereinstellung und andere Batch-Entwicklungsanwendungen. Die Entwicklung der Remote-IOT-App verwendet eine leere App-Software, die eine personalisierte Schnittstelle auf dem Endgerät mit umfangreichen integrierten Steuerelementen und einer schönen U-Oberfläche anpassen kann. Das ESP32-2432S028-Entwicklungsboard basiert auf dem ESP32-D0WDQ6-Controller, Dual-Core-CPU, Taktfrequenz bis zu 240 MHz. Integriert reichhaltige Ressourcenperipherie, Hochgeschwindigkeits-SDIO, SPI, UART und andere Funktionen und unterstützt automatischen Download. Sie können das App-Steuermodul und die Benutzeroberfläche anpassen, was sehr gut geeignet ist, um eine App-Benutzeroberfläche zu erstellen, die Ihren eigenen Anforderungen entspricht.