waveshare lcd

Dies ist ein 2,13-Zoll-E-Ink-Display-HAT für Raspberry Pi mit einer Auflösung von 250 x 122 und einem eingebetteten Controller, der...

7inch IPS screen 1024x600 hardware resolution;Resistive touch control Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie);Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) Multi-languages OSD menu, for power management, brightness adjustment, contrast adjustment, etc. Supports 100-level backlight adjustment

The display orientation is portrait by default, 1440×2560 resolution (H×V). Change the software config for landscape display. For the moment, only the Raspberry Pi 4B and CM4 have adequate CPU performance to drive this 2K display completely. Support more powerful future versions as long as its GPU performance is equivalent to or better than the Pi 4B. Limited by the hardware, when working with Raspberry Pi 3B+/Pi 3B/Zero 2w/Zero w, only supports default portrait display and cannot be rotated. The case only supports Raspberry Pi 4B. For reference only, Raspberry Pi 4B and CM4 are not included

ESP32-S3 Development Board onboard 7-inch capacitive touch screen, 800x480 resolution, 65K colors. Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.Built-in 512KB SRAM and 384KB ROM, with onboard 8MB Flash and 8MB PSRAM. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna.Support capacitive touch control via I2C interface, 5-point touch with interrupt support. Onboard CAN, RS485, I2C interface, Micro SD card slot and so on, integrates full-speed USB serial port. Support flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios.

RP2350 microcontroller chip designed by Raspberry Pi in the United Kingdom Onboard 3PIN SWD port for connecting the debugged target board; Standard CMSIS-DAP interface can be used to debug most ARM-based microcontrollers; Works with OpenOCD and other tools supporting CMSIS-DAP; Adopts the Raspberry Pi 3PIN Debug Connector Specification Onboard 3PIN USB to UART bridge; Onboard 4PIN I2C port for the testing target board; Onboard 1.14inch 240×135 pixels 65K color IPS LCD display Equipped with plastic case and cables; Open-source firmware, more convenient to upgrade

Supports Pi 4B Supports Raspberry Pi OS, 5-points touch, driver free Supports Ubuntu, single point touch, driver free up to 5-points touch, depending on the operating system. Adjustable Brightness Via Software.

RP2350-Touch-LCD-1.46B, with touch control(without protective cover glass), is a high-performance, highly integrated microcontroller development board. Tiny size with onboard 1.46inch capacitive touch IPS screen, RTC chip, 6-axis IMU (3-axis accelerometer and 3-axis gyroscope), TF card slot, and so on, which makes it easy for developing and integrating into the products quickly RP2350B microcontroller chip. Adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz 520KB of Static RAM, 16MB onboard Flash memory. Type-C connector for easier use. Onboard 1.46inch LCD display, 412x412 resolution, 65K color. Supports 5-point touch function controlled via I2C interface, with interrupt support Onboard 3.7V MX1.25 li batt. recharge/discharge header. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. 14 x Multi-Function GPIO Pins 2 x I2C, 2 x UART, 7 x 12-bit ADC and 12 x controllable PWM channels. Accurate clock and timer on-chip. Temperature sensor. 12 x Programmable I/O (PIO) state machines for custom peripheral support

Dies ist ein 2,13-Zoll-E-Ink-Display-HAT für Raspberry Pi mit einer Auflösung von 250 x 122 und einem eingebetteten Controller, der...

1.8inch Capacitive Touchscreen: The board features a 1.8-inch capacitive touchscreen with excellent touch sensitivity, offering a responsive display for a variety of interactive applications. ESP32-S3 Chip: Powered by the ESP32-S3, the board delivers high-performance dual-core processing capabilities with built-in hardware support for AI and machine learning tasks. Dual Wireless Connectivity: Supports both Wi-Fi and Bluetooth 5.0, enabling seamless communication with other devices for Internet of Things (IoT) and remote control applications. Audio and Voice Integration: Equipped with an audio decoder and microphone, this board allows integration of voice recognition and audio playback, making it suitable for smart audio applications. Flexible Power Supply: The board can be powered via USB Type-C or a 3.7V BAT, providing flexibility for portable or stationary projects.

Suitable for Raspbery Pi Pico hardware debug Onboard 3PIN SWD port for connecting the debugged target board Standard CMSIS-DAP interface can be used to debug most ARM-based microcontrollers Works with OpenOCD and other tools supporting CMSIS-DAP Adopts the Raspberry Pi 3PIN Debug Connector Specification Onboard 3PIN USB to UART bridge. Onboard 4PIN I2C port for the testing target board. Onboard 1.14inch 240×135 pixels 65K color IPS LCD display. Equipped with plastic case and cables. Open-source firmware, more convenient to upgrade

Built with ESP32-S3 dual-core processor up to 240MHz, plus 16MB Flash and 8MB Pstatic ram for smooth GUI running Supports 2.4GHz Wi-Fi and BT BLE 5, with onboard antenna for wireless connectivity Onboard 4inch 480x480 pixel touch display, 65K color, with 5-point capacitive touch via I2C interface Features flexible clock and independent module power control for low power consumption in different scenarios Includes multiple peripheral interfaces for quick development of smart panels, home gateways, and industrial control systems

The product being a control panel. the main function is to display images associated with product operational status 15.6-inch, 1920 × 1080 ultra-clear resolution. 10-point control control, tempered glass with 6H hardness. Support Raspberry Pi OS / Ubuntu / Kali and Retropie when used for Raspberry Pi. Multi-language OSD menu support (can be used for power control, adjusting brightness/contrast, etc.)

1,3-Zoll-LCD-Anzeigemodul für Raspberry Pi Eingebetteter ST7789-Treiber mit SPI-Bus Für Raspberry Pi Header-Kompatibilität...

Supports Raspbian, 5-points touch, driver free Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free Supports Retropie, driver free Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/CM3/3+ requires extra adapter board Adjustable Brightness Via Software,5Zoll Mini Bildschirm raspberry pi 4 4b display ips monitor tft portable touchscreen raspberry zero 3 windows 10 banana pi hd 800 touch monitor 5inch zoll bildschirm touch rpi screen pi4 Pi4B HDMI screen

High-Resolution 4-inch IPS Display (480×480, 65K Colors)​​ – Crisp, vibrant visuals with a wide 160° viewing angle for immersive UIs or data visualization. Dual-Core & Dual-Architecture Flexibility​ – Choose between ​dual ARM Cortex-M33​ (industry-standard) or ​dual RISC-V Hazard3​ cores (up to 150MHz), enabling RISC-V experimentation with robust support. Integrated Peripherals for Rapid Development​ – Built-in ​5-point capacitive touch (optional)​, ​CAN/Rs485/I2C interfaces, ​6-axis IMU (accelerometer + gyroscope)​, ​RTC, and ​TF card slot​ for seamless hardware expansion. Powerful & Expandable​ – ​16MB Flash + 520KB Static RAM, with ​PSRAM solder pads​ for memory upgrades, ​7–36V DC input, and ​Type-C programming​ (USB 1.1 device/host). Versatile Wiring & Low-Power Modes​ – ​Bottom/back wiring terminals​ (DIN rail/embedded-friendly) + ​sleep/dormant modes​ for energy-efficient applications.

The display orientation is portrait by default, 320×1480 resolution (H×V). Change the software config for landscape display. Supports all versions of Raspberry Pi. Supports Raspbian, 5-points touch, driver free. Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Supports Retropie, driver free. Jetson Nano:Supports Ubuntu, single point touch, driver free. Supports Windows 10 / 8.1 / 8 / 7, 5-points touch, driver free. raspberry pi 4 screen hdmi lcd jetson nano pc 11.9inch ips display capacitive touch monitor

Das Universal High Resolution 7,0 IPS Display von WaveShare ist ein vielseitiges und leistungsstarkes Display, das sich ideal für verschiedene Anwendungen in der Mikrocomputer- und Embedded-System-Umgebung eignet. Mit einer hohen Auflösung von 1024×600 Pixeln und der IPS-Technologie bietet es eine hervorragende Bildqualität mit stabilen Blickwinkeln und lebendigen Farben. Das Display ist mit einem HDMI-Eingang ausgestattet, der eine einfache Verbindung zu einer Vielzahl von Einplatinencomputern wie Raspberry Pi, Banana Pi und Beaglebone Black ermöglicht. Die Stromversorgung und die Touch-Funktion werden über eine Micro-USB-Verbindung realisiert, was die Integration in bestehende Systeme erleichtert. Der kapazitive Touchscreen unterstützt eine intuitive Bedienung und ist mit verschiedenen Betriebssystemen wie Raspbian, Ubuntu und Windows 10 IoT kompatibel, ohne dass zusätzliche Treiber erforderlich sind. Zudem bietet das Display die Möglichkeit, als Kontrollmonitor für Kameras verwendet zu werden, was seine Vielseitigkeit weiter erhöht. - Kompatibel mit verschiedenen Einplatinencomputern wie Raspberry Pi und Beaglebone Black - Einfache Montage durch vier Befestigungsbohrungen - Hintergrundbeleuchtung kann über einen integrierten Schalter deaktiviert werden - Unterstützt 5-Punkt-Multitouch unter Windows 7, 8.1 und 10 ohne Treiberinstallation - Ideal für grafische Ausgaben und Steuerungsmonitor in Embedded-System-Umgebungen.

Das 4-Zoll IPS Touchscreen-Display von WaveShare bietet eine beeindruckende 720x720 Auflösung und einen weiten Betrachtungswinkel von 170°. Es ist mit einer kapazitiven 10-Punkt-Touch-Technologie ausgestattet, die eine präzise und reaktionsschnelle Benutzererfahrung ermöglicht. Das Display nutzt optisches Bonding, was nicht nur die Sichtbarkeit verbessert, sondern auch das Panel staubdicht macht. Es ist ideal für Anwendungen im Smart Home-Bereich und lässt sich problemlos mit verschiedenen Raspberry Pi-Modellen, einschliesslich Pi 4B und 3B+, integrieren. Die Software ermöglicht eine Anpassung der Helligkeit, um den Anforderungen unterschiedlicher Umgebungen gerecht zu werden. Dieses Display ist eine hervorragende Wahl für Entwickler, die ein hochwertiges und vielseitiges Touchscreen-Interface suchen. - Hervorragende Anzeigeleistung mit 170° weitem Betrachtungswinkel - Gehärtetes Glas mit 6H Härte für erhöhte Robustheit - Optisches Bonding für verbesserte Sichtbarkeit und Staubdichtigkeit - Unterstützt bis zu 10-Punkt Touch über I2C-Schnittstelle - Kompatibel mit Raspberry Pi OS und verschiedenen Raspberry Pi Modellen.

Dies ist ein 2,13-Zoll-E-Ink-Display-HAT für Raspberry Pi mit einer Auflösung von 250 x 122 und einem eingebetteten Controller, der...

The RP2350-Touch-LCD-2.1(Flat touch panel version) is a high-performance, highly integrated Waveshare microcontroller development board. Tiny size with onboard 2.1inch capacitive touch IPS screen, 6-axis IMU (3-axis accelerometer and 3-axis gyroscope), RTC chip, TF card slot, and so on, which makes it easy for you to develop and integrate into the products quickly RP2350B microcontroller chip designed by Raspberry Pi. Adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz 520KB of Static RAM, 16MB onboard Flash memory, with reserved solder pads for PStatic RAM chip expansion. Type-C connector for easier use. Onboard 2.1inch capacitive touch IPS display, 480x480 resolution, 65K color, for clear color picture display USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. 9xMulti-Function GPIO Pins. 2xSPI, 2xI2C, 2xUART, 5x12-bit ADC and 9xcontrollable PWM channels Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip. 12xProgrammable I/O (PIO) state machines for custom peripheral support

RP2350-Touch-LCD-1.46, with touch control and protective cover glass, is a high-performance, highly integrated microcontroller development board. Tiny size with onboard 1.46inch capacitive touch IPS screen, RTC chip, 6-axis IMU (3-axis accelerometer and 3-axis gyroscope), TF card slot, and so on, which makes it easy for developing and integrating into the products quickly RP2350B microcontroller chip. Adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz 520KB of Static RAM, 16MB onboard Flash memory. Type-C connector for easier use. Onboard 1.46inch LCD display, 412x412 resolution, 65K color. Supports 5-point touch function controlled via I2C interface, with interrupt support Onboard 3.7V MX1.25 li batt. recharge/discharge header. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. 14 x Multi-Function GPIO Pins 2 x I2C, 2 x UART, 7 x 12-bit ADC and 12 x controllable PWM channels. Accurate clock and timer on-chip. Temperature sensor. 12 x Programmable I/O (PIO) state machines for custom peripheral support

800x480 high hardware resolution;Resistive touch control; Backlight can be turned off to lower power consumption Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers; When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free. When work as a computer monitor, supports Windows 10/8.1/8/7, single touch, and driver free Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable; BB Black: HDMI cable

1,3-Zoll-LCD-Anzeigemodul für Raspberry Pi Eingebetteter ST7789-Treiber mit SPI-Bus Für Raspberry Pi Header-Kompatibilität...

High-Performance Dual-Core Processor – Powered by the ESP32-S3R8 chip with a 240MHz Xtensa 32-bit LX7 dual-core processor, ensuring fast and efficient performance for HMI applications. Wireless Connectivity – Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) with an onboard antenna for seamless wireless communication Ample Memory & Storage – Features 512KB Static RAM, 384KB ROM, 8MB PSRAM, and 16MB Flash, along with a TF card slot for additional storage. Rich Onboard Peripherals – Includes a 1.9-inch LCD (170×320 resolution), a QMI8658 6-axis IMU (accelerometer + gyroscope), and a USB Type-C port for power and debugging. Strong Expandability – Equipped with a Pico-compatible interface, Onboard 3.7V MX1.25 lithium batt charge and discharge interface, and multiple GPIO pins for enhanced compatibility and rapid prototyping.

10.1 Kapazitiver Touch Screen LCD (B) mit Gehäuse, 1280×800, HDMI, IPS 10,1-Zoll-Display mit kapazitivem Touchscreen, IPS-Panel und HDMI-Schnittstelle, ausgestattet mit einem robusten Acrylgehäuse. Die native Auflösung beträgt 1280 × 800 Pixel, bei einem Betrachtungswinkel von 170 °. Das Display unterstützt bis zu 10 gleichzeitige Touchpunkte (abhängig vom verwendeten Betriebssystem) und nutzt eine Touch-Oberfläche aus gehärtetem Glas mit einer Härte von bis zu 6H. Die Stromversorgung erfolgt über USB, der Energieverbrauch ist niedrig. Das Modul ist kompatibel mit allen Versionen des Raspberry Pi und unterstützt verschiedene Betriebssysteme wie Raspberry Pi OS, Ubuntu, Kali, WIN10 IoT sowie Retropie. Zusätzlich lässt sich das Display als externer Monitor an Mini-PCs oder Desktop-PCs unter Windows 7 bis 11 verwenden, jeweils treiberfrei mit vollem 10-Punkt-Touchsupport. Durch das beiliegende Zubehör wie HDMI-Kabel, Micro-HDMI-Adapter,

1,3-Zoll-LCD-Anzeigemodul für Raspberry Pi Pico Eingebetteter ST7789-Treiber mit SPI-Bus Für Raspberry Pi Pico Header-Kompatibilität...

1,3-Zoll-LCD-Anzeigemodul für Raspberry Pi Eingebetteter ST7789-Treiber mit SPI-Bus Für Raspberry Pi Header-Kompatibilität...

Dies ist ein 2,13-Zoll-E-Ink-Display-HAT für Raspberry Pi mit einer Auflösung von 250 x 122 und einem eingebetteten Controller, der...

5Zoll Mini Bildschirm,800x480 hardware resolution, configurable by software (up to 1920x1080); Capacitive touch control Supports popular mini PCs such as Raspberry Pi,Jetson Nano,BB Black, Banana Pi, as well as general desktop computers When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free; When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch, etc.Multi languages OSD menu, for power management, brightness/contrast adjustment, etc.; 3.5mm audio jack, speaker connector, supports HDMI audio output; Also supports VGA input (specific cable is required and should be purchased separately) Raspberry Pi 4,4B,Raspberry Pi 4 HDMI LCD,Raspbian HDMI display,portable touchscreen,raspberry pi 4b touch monitor windows hdmi ipsmonitor mini banana pi 5inch 5 Zoll mini BildschirmPC

Raspberry Pi Pico Evaluation Kit (Typ B), Der Pico + Farb-LCD + IMU-Sensor + GPIO Expander