esp32 development board

ESP32-S3 AI Smart Speaker Development Board.Supports Noise Reduction And Echo Cancellation. Onboard LCD and DVP interfaces for connecting external displays and cameras Onboard Audio Input/Output.Supports high-quality audio processing, providing clear and high-quality audio input and output. Equipped with the offline voice model we provided to realize device control via customizable shortcut commands Supports AI Speech Interaction.Allows access to online large model platforms such as DeepSeek, Doubao, etc Supports external LCD displays & cameras.Onboard LCD interface, compatible with Waveshare 1.47inch / 2inch / 2.8inch / 3.5inch LCDs and other SPI displays. Onboard DVP interface, compatible with ESP32 OV2640 / OV5640 cameras

ESP32-C6-Touch-LCD-1.83-EN, Standard version, without Lithium Batt. Equipped with a high-performance RISC-V 32-bit processor with up to 160MHz operating frequency and a low-power RISC-V 32-bit processor with up to 20MHz operating frequency. Integrated Wi-Fi 6, BT 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance Onboard 320KB ROM, 512KB HP Static RAM, 16KB LP Static RAM and external 16MB Flash memory. Type-C port, easier to use. Onboard 1.83inch capacitive touch display, 240 x 284 resolution, 65K color. Built-in ST7789P display driver and CST816D capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc. Onboard PCF85063 RTC chip, powered by Lithium batt. through AXP2101 chip for uninterrupted power supply Onboard PWR and BOOT programmable buttons for easy custom function development. Onboard 3.7V MX1.25 Lithium Batt. recharge/discharge header. Equipped with dual microphone array with noise reduction and echo cancellation circuit, suitable for near/far-field wake-up. Onboard ES8311 audio codec chip, microphones, and speaker Adapting GPIO, I2C, USB and UART pads for external devices connection and debugging, enabling flexible peripheral configuration. Supports accurate control such as flexible clock and independent module power setting to realize low power consumption in different scenarios. High touch screen transmittance, fast response and long lifetime

ESP32-C6 1.8inch Touch AMOLED Display development board,Embedded with SH8601 Display Driver & FT3168 / FT6146 Capacitive Touch Chip Tiny size, Touch More Possibilities,Suitable for various smart device development, enabling human-machine interaction function, supports connecting to a Batt for independent operation Adopts AMOLED screen.The next-generation display technology, compared to those traditional LCD displays, the AMOLED screen features precise light-control capability, representing more delicate colors, more picture details, and more vivid video image 178° wide viewing angle.Excellent Display Performance, 16.7M color, wide viewing angle Onboard audio codec chip.Supports high-quality audio processing, providing clear and high-quality audio input and

ESP32-S3-Touch-LCD-5,Integrates RGB interface LCD with 5-point capacitive touch, multiple peripheral interfaces IPS Display Panel,Excellent display performance, 178° wide viewing angle * Capacitive 5-point touch, supports touch function with I2C interface, 5-point touch for flexible operation and smooth multi-point UI interaction Supports multiple peripherals, Supports the expansion of multiple peripherals via CAN, RS485, I2C and isolated IO interfaces Support Batch Customization,Support software and hardware customization.Including hardware interface, LOGO, label, case and web page, etc.

ESP32-S3 1.54inch e-Paper AIoT Development Board Supports AI speech interaction, temperature and humidity monitoring, and DIY creative function, etc. Small Size, Touch More Possibilities.Suitable For Various Smart Device Development, and Can Realize Human-Computer Interaction Function. Supports connecting to a Batt for independent operation Onboard audio codec chip.Supports high-quality audio processing, providing clear and high-quality audio input and output Supports AI Speech Interaction.Allows access to online large model platforms such as DeepSeek, Doubao, etc Application Scenarios.Suitable for Voice Interaction and e-Reader, etc

Equipped with ESP32-S3 and ESP32 dual MCUs, up to 4 cores and 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) and Classic Bluetooth, with onboard antenna Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Onboard 1.8inch LCD display, 360 × 360 resolution, 262K color. Supports touch control via I2C interface, with interrupt support Onboard audio decoder chip, microphone, knob encoder, vibration motor, TF card slot, and batt recharge management module CNC process metal case with blue / black color options, nice looking and durable, easy to carry

Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with an onboard antenna. Built-in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash.Onboard 4.3inch capacitive touch display, 800×480 resolution, 65K color. Onboard CAN, RS485, I2C interface, and TF card slot, integrate full-speed USB port. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support.Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios.

High-Performance AI Voice Interaction Development Board: Features a dual-core RISC-V processor (up to 160MHz), onboard dual microphone array, speakers, and an ES8311 audio codec chip, supporting noise reduction and echo cancellation. It can easily connect to large online models like DeepSeek for intelligent voice dialogue. Integrating Advanced Wireless Connectivity: ESP32-C6 supports Wi-Fi 6, Bluetooth 5.0, and Zigbee 3.0/Thread protocols, boasting excellent RF performance and multi-protocol compatibility, making it suitable for wireless communication development in IoT and wearable devices. Equipped with a 1.83-inch capacitive touchscreen LCD: (240×284 resolution, 65K colors), it offers high responsiveness and light transmittance. Combined with an onboard six-axis sensor (accelerometer + gyroscope) and RTC chip, it supports motion monitoring, step counting, and low-power real-time clock applications. Low Power Design: built-in Batt. recharge chip, a Type-C interface, and supports flexible clock and power control, enabling low-power operation in various scenarios, making it convenient for carrying around and long-term use. Rich Interfaces: It offers a wealth of expansion interfaces and customization features, including GPIO, I2C, and UART pads, two programmable side buttons, support for external sensors and debugging, and facilitates rapid prototyping and functional verification.

ESP32-C6-Touch-AMOLED-1.64, Standard version(without Pre-soldered Header). Equipped with a high-performance 32-bit RISC-V processor with clock speed up to 160 MHz, and a low-power 32-bit RISC-V processor with clock speed up to 20MHz. Integrated Wi-Fi 6, BT 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance, onboard antenna, and supports switching to an external antenna by resoldering an onboard resistor Built-in 320KB ROM, 512KB HP Static RAM, 16KB LP Static RAM, with external 16MB Flash. Onboard 1.64inch AMOLED capacitive touch display, 280 x 456 resolution, 16.7M color. Built-in CO5300 display driver and FT6146 capacitive touch chip, using QSPI and I2C communication respectively Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for motion gesture detection, step counting, and more. Onboard PWR button, along with programmable BOOT button for customizable functionality and flexible development Onboard 3.7V MX1.25 Lithium Batt recharge/discharge header. Onboard TF card slot, enabling external storage for pictures or files. Onboard USB Type-C port for power supply, program downloading, and debugging, making development more convenient Adapting I2C, UART and USB pins for connecting peripherals and debugging, enabling flexible configuration of peripheral functions. Adopts CNC-machined case with precision-wrapped edges for better protection, nice looking and more durable

ESP32-C6-Touch-AMOLED-1.64-M, With pre-soldered header. Equipped with a high-performance 32-bit RISC-V processor with clock speed up to 160 MHz, and a low-power 32-bit RISC-V processor with clock speed up to 20MHz. Integrated Wi-Fi 6, BT 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance, onboard antenna, and supports switching to an external antenna by resoldering an onboard resistor Built-in 320KB ROM, 512KB HP Static RAM, 16KB LP Static RAM, with external 16MB Flash. Onboard 1.64inch AMOLED capacitive touch display, 280 x 456 resolution, 16.7M color. Built-in CO5300 display driver and FT6146 capacitive touch chip, using QSPI and I2C communication respectively Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for motion gesture detection, step counting, and more. Onboard PWR button, along with programmable BOOT button for customizable functionality and flexible development Onboard 3.7V MX1.25 Lithium Batt recharge/discharge header. Onboard TF card slot, enabling external storage for pictures or files. Onboard USB Type-C port for power supply, program downloading, and debugging, making development more convenient Adapting I2C, UART and USB pins for connecting peripherals and debugging, enabling flexible configuration of peripheral functions. Adopts CNC-machined case with precision-wrapped edges for better protection, nice looking and more durable

ESP32-S3-DEV-KIT-N32R16V-M, with pre-soldered headers. Adopts ESP32-S3-WROOM series module with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz Integrated 512KB Static RAM, 384KB ROM, 32MB Flash memory and 16MB PSRAM. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, with superior RF performance Type-C connector, easier to use. Onboard CH343 and CH334 chips can meet the needs of USB and UART development via a Type-C interface Rich peripheral interfaces, compatible with the pinout of ESP32-S3-DevKitC-1 development board, offers strong compatibility and expandability. Castellated module allows soldering directly to carrier boards Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios

The can be detached from the body for flexible standalone use. button interrupts conversations/enters flash mode with one click. Development...

ESP32-S3-Touch-LCD-4.3 is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 4.3inch capacitive touch screen can smoothly run GUI programs such as LVGL Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 BLE, with onboard antenna Built in 512KB of Static RAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash. Onboard 4.3inch capacitive touch display, 800×480 resolution, 65K color. Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios

ESP32-C6-Touch-LCD-1.54-EN, with touch control, without Li Batt. Onboard 1.54inch LCD display, 6-axis sensor, dual microphones array, and TF card slot, providing the hardware foundation for display, sensing, voice, and multimedia storage. With these hardware resources, it supports fun interactive mini-games, voice wake-up, noise reduction, and echo cancellation It allows access to online AI large model platforms, enabling intelligent voice interaction and continuous upgrades. The factory firmware includes built-in functions such as AI conversation, audio playback, photo album, text reading, and a gravity ball game Equipped with high-performance ESP32-C6 32-bit RISC-V processor, up to 160MHz main frequency. Supports 2.4GHz Wi-Fi 6 and BT 5, onboard antenna, with superior RF performance. Built-in 512KB Static RAM, 320KB ROM, and external 16MB flash. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design Type-C port, improving device compatibility, easier to use. Onboard 1.54inch LCD display for clear color picture display, 240 x 240 resolution, 262K color. Onboard ES7210 audio encoding chip for dual microphones audio capture and echo cancellation. Onboard ES8311 audio codec chip, NS4150B amplifier chip, microphones, and speaker. Onboard 3.7V MX1.25 Li Batt recharge/discharge header Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture to expand applications. Adapting I2C, UART, and other pin pads for external device connection and debugging, enabling flexible peripheral configuration. Onboard two customizable function buttons for operations such as single-click, double-click, and long press

ESP32-S3-DEV-KIT-N32R16V, without pre-soldered headers.Adopts ESP32-S3-WROOM series module with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz Integrated 512KB Static RAM, 384KB ROM, 32MB Flash memory and 16MB PSRAM. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, with superior RF performance Type-C connector, easier to use. Onboard CH343 and CH334 chips can meet the needs of USB and UART development via a Type-C interface Rich peripheral interfaces, compatible with the pinout of ESP32-S3-DevKitC-1 development board, offers strong compatibility and expandability. Castellated module allows soldering directly to carrier boards Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios

Robuste Verarbeitung und Konnektivität: Dank des ESP-WROOM-32-Moduls bietet es Dual-Core-Verarbeitungsfunktionen, ideal für komplexe Algorithmen und Multitasking. Es unterstützt verschiedene Kommunikationsprotokolle und ist somit vielseitig für IoT-Projekte einsetzbar. Umfassendes Entwicklungskit: Dieses ESP32-Entwicklungsboard verfügt über ein 2,8--TFT-LCD mit ILI9341-Controller für eine brillante Darstellung und einen resistiven Touchscreen für interaktive Anwendungen. Perfekt für Enthusiasten und Entwickler. Langlebig und schützend: Wird mit einem eleganten Acrylgehäuse geliefert, das Ihre Entwicklungsplatine vor physischen Schäden schützt und gleichzeitig eine klare Sicht auf die Komponenten ermöglicht. Einfache Integration: Dieses ist für eine einfache Einrichtung und Integration in Ihre Projekte konzipiert. Umfangreicher Support und Dokumentation stehen zur Verfügung, damit Sie schnell loslegen können.

ESP32-S3R8 Processor--- Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz W-i-F-i (802.11 b/g/n) and Blue--tooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. AMOLED Touch Screen--- Onboard 1.8inch AMOLED display for clear color picture display, 368 x 448 resolution, 16.7M color, 178° wide viewing angle. Compared to those traditional LCD displays, the AMOLED screen features precise light-control capability, representing more delicate colors, more picture details, and more vivid video image. Onboard Audio Codec---Supports high-quality audio processing, providing clear and high-quality audio input and output. Supports Offline Speech recognition and AI Speech Interaction---Allows access to online large model platforms to support more AI application scenarios. For Various Smart Devices---Suitable For Various Smart Devices Development, Can Realize Human-Computer Interaction Function. Supports installing ba|tte|ry inside the case for independent operation. （Note: this version doesn't include ba|tte|ry ） Dedicated Black Case---with removable back cover for easy embedded into the projects and DIY design. Sensor and Chip---Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources.

High-Performance Processor: Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Wireless Connectivity: Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Memory & Storage: Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Display & Interaction: Onboard Type-C port, more convenient, better device compatibility; onboard 1.46inch LCD display, 412 × 412 resolution, 16.7M color; supports touch function controlled via I2C interface, with interrupt support. Rich Peripherals & Low Power: Adapting UART, I2C and partial IO interfaces; onboard QMI8658 6-axis IMU, PCF85063 RTC with batt header, PWM/BOOT buttons, TF card slot; supports flexible clock/power modes for low power consumption; multiple GPIO pins for easy customization.

ESP32 Learning Platform:This ESP32-XX Learning Kit is designed for beginners, students, and hobbyists to quickly get started with IoT and embedded...

ESP32-S3 4.3inch Capacitive Touch Display Development Board Type B,Integrates RGB Interface LCD With 5-Point Capacitive Touch, Multiple Peripheral Interfaces IPS Display Panel,Excellent Display Performance, 160° Wide Viewing Angle Capacitive 5-Point Touch,Supports Touch Function With I2C Interface, 5-Point Touch For Flexible Operation And Smooth Multi-Point UI Interaction Supports Multiple Peripherals,Supports The Expansion Of Multiple Peripherals Via CAN, RS485, I2C And Isolated IO Interfaces Supports Two Wiring Methods,Comes With Two Types Of Screw Terminals, Allowing For Bottom Or Back Wiring, Which Is More Convenient To Integrate Into Various Application Scenarios Such As DIN Rail Or Embedded Devices

Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 4inch capacitive touch display, 480×480 resolution, 65K color Onboard CAN, RS485, I2C interface and TF card slot, and integrates full-speed USB port Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios

ESP32-S3 2.16inch AMOLED display development board.Embedded with CO5300 Display Driver and CST9220 Capacitive Touch Chip Small Size, Touch More Possibilities.Suitable For Various Smart Device Development, and Can Realize Human-machine Interaction Function. Supports connecting to a Batt for independent operation Adopts AMOLED screen.The next-generation display technology, compared to traditional LCD displays, the AMOLED screen features precise light-control capability, representing more delicate colors, more picture details, and more vivid videos and images 178° wide viewing angle.Excellent Display Performance, 16.7M color, wide viewing angle.ESP32-S3 2.16inch AMOLED display development board, 178° wide viewing angle Supports ESP-IDF, Arduino IDE.Comprehensive ESP-IDF and Arduino tutorials for easy learning. Facilitates secondary development and function expansion, accelerating application deployment

This product is a high-performance RISC-V development board based the ESP32-P4 chip, featuring a dual-core and a single-core processor. It features...

Ladeanzeige - Zeigt die LED im Inneren an (Grün bedeutet voll und Rot bedeutet Aufladen). Automatischer Betrieb - Laden und Arbeiten können gleichzeitig erfolgen. Kann programmiert werden – 1 Schalter könnte die Stromversorgung steuern, 1 zusätzliche LED könnte programmiert werden (verbunden mit GPIO16). Volle ESP32-Pins – 0,5 A Ladestrom, 1 A Ausgang, volle ESP32-Pins brechen aus. Ladeschutz – Überladeschutz, Überentladeschutz.

ESP32-S3-Touch-LCD-3.5,Integrated audio input and output, enabling AI interaction and offline voice control Supports AI Speech Interaction,Allows access to online large model platforms such as DeepSeek, Doubao, etc. Capacitive touch,Suitable for various smart device development, enabling human-machine interaction IPS Display Panel,Excellent display performance, 262K color, wide viewing angle Onboard audio codec,Supports high-quality audio processing, providing clear and high-quality audio input and output

The can be detached from the body for flexible standalone use. button interrupts conversations/enters flash mode with one click. Development...

Equipped with high-performance ESP32-C6 32-bit RISC-V processor, up to 160MHz main frequency. Supports Wi-Fi 6, BLT 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communications, with outstanding RF performance Built-in 512KB HP Static RAM, 16KB LP Static RAM, 320KB ROM, and external 16MB Flash. Type-C port, easier to use Onboard 1.28inch LCD display for clear color picture display, 240 × 240 resolution, 65K color. Optional CNC metal case, featuring a CNC metal top case with an acrylic dull-polish bottom plate on the back Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope). Onboard PCF85063 RTC chip for convenient RTC functionality. Onboard 3.7V MX1.25 Lithium Batt recharge/discharge header Onboard SH1.0 14PIN expansion connector, adapting 6 × GPIO, 1 × UART, and 1 × I2C. Onboard TF card slot, supporting storage expansion and high-speed data transfer for greater flexibility

Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Adapting UART, I2C and some IO interfaces, integrates full-speed USB port Onboard 2.8inch capacitive touch display, 240×320 resolution, 262K color. Onboard speaker, QMI8658 6-axis sensor, RTC sensor, TF card slot and batt recharge management module, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

Built on ESP32-S3R8 dual-core processor with up to 240MHz frequency and integrated 2.4GHz Wi-Fi & BT 5 (LE) Features 2.06inch AMOLED capacitive touch display, 410x502 resolution, 16.7M colors, and low power consumption Includes QMI8658 6-axis IMU for motion gesture detection and step counting, plus PCF85063 RTC chip for continuous timekeeping Equipped with Type-C connector, onboard 8MB PStatic RAM, external 32MB Flash, and TF card slot for extended storage Integrated AXP2101 power management IC supports Bat charging and life optimization, with recharge/discharge header for 3.7V Li Bat

Equipped with a high-performance Xtensa 32-bit LX7 dual-core processor, clocked at to 240MHz. Supports 2.4GHz Wi-Fi and 5 (LE), with an onboard...