waveshare lcd

Provide electronic development resources and manual, please check it carefully before using. No touch-4.3inch IPS Display, 800 × 480 hardware resolution. Support Pi4B/3B+/3A+/3B/2B/B+/A+, some CM3/3+/4 expansion boards need external DSI-Cable-15cm Directly drive the LCD via the DSI port of the Raspberry Pi, and the refreshing rate is up to 60Hz. Support software backlight adjustment, saving more power.

Compatible with raspberry pi compute module 4.Dedicated 40pin lcd connector,one connection for display and touch, support 70H-1024600-IPS-A series display.Easier and faster to be integrated into applications.Working With An Additional Solid State Drives. Standard raspberry pi pico header, compatible with raspberry pi pico series boards. Features CAN function, adopts SPI interface CAN controller MCP2515 with transceiver SIT65HVD230DR. Comes with online development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples). Raspberry Pi Pico is NOT included.Please correctly connect the module and raspberry pi pico.

5-DSI-TOUCH-B-WITH-CASE, with protective black case (The case is only compatible with the Raspberry Pi 5 due to its connector layout.) This touch screen is compatible with Raspberry Pi 5 / Raspberry Pi 4B / ESP32-P4-Module-DEV-KIT / Luck-fox Lyra / Luck-fox Omni3576 IPS Display Panel: Excellent Display Performance With 178° Wide Viewing Angle. Supports Backlight Adjustment Via Software 5-Point Capacitive Touch: Up to 5-point touch, depending on the operating system. Up to 6H hardness toughened glass panel. Optical bonding, provides clear image, dustproof. Thinner And More Space-Saving: The Total Thickness Of The LCD Is Only 8mm, Lightweight And Nice Looking The display orientation is portrait by default, 720 x 1280 resolution (HxV). Change the software config for landscape display.

✨Dies ist der offizielle LCD-Bildschirm von Waveshare, mit einem kapazitiven 10,1-Zoll-Touchscreen-LCD. ✨Dieser IPS-Bildschirm hat eine Auflösung von 1280 × 800, mit HDMI-Schnittstelle. ✨10-Punkt-Touch-Steuerung, gehärtetes Glas, Härte bis zu 6H ✨HDMI-Audio-Eingang, 3,5-mm-Kopfhörer-/Lautsprecherbuchse. Es ist ein idealer Bildschirm. ✨Verwendung mit RPi, unterstützt RPi OS / Ubuntu / Kali und Retropie System. Verwendung als Computermonitor, unterstützt Windows 11/10/8.1/8/7 System.

7inch DSI touch screen with white case, ten-point capacitive touch control. IPS display panel with hardware resolution of 720x1280 Optical bonding toughened glass panel, clearer picture quality Using AF anti-fingerprint process, not easy to get fingerprints and easy to clean Toughened glass capacitive touch panel, hardness up to 6H. Drive the LCD through the DSI interface, with a refresh rate of up to 60Hz Supports software control of backlight brightness. Aluminum alloy back cover design, pure passive cooling design

ESP32-S3-Touch-LCD-5,Integrates RGB interface LCD with 5-point capacitive touch, multiple peripheral interfaces IPS Display Panel,Excellent display performance, 178° wide viewing angle * Capacitive 5-point touch, supports touch function with I2C interface, 5-point touch for flexible operation and smooth multi-point UI interaction Supports multiple peripherals, Supports the expansion of multiple peripherals via CAN, RS485, I2C and isolated IO interfaces Support Batch Customization,Support software and hardware customization.Including hardware interface, LOGO, label, case and web page, etc.

Please note!!! This product requires a 3.7V MX1.25 lithium batt for operation, which is not included. Please purchase it separately. High-Performance MCU: The board is equipped with the ESP32-S3R8 module, featuring a powerful Xtensa 32-bit LX7 dual-core processor that operates at up to 240MHz, ensuring efficient processing for various smart applications. Wireless Connectivity: With built-in support for 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), the ESP32-S3-AUDIO-Board offers robust wireless capabilities, facilitated by the onboard antenna for seamless communication and connectivity. Advanced Voice Interaction: The dual microphone array is designed with noise reduction and echo cancellation features, enabling accurate speech recognition and responsive near/far-field wake-up functionality, perfect for voice-activated applications. Extensive Expansion and Multimedia Features: The ESP32-S3-AUDIO-Board includes various expansion interfaces, such as SPI LCD display, DVP camera, USB, I2C, and multiple reserved buttons. Additionally, its onboard audio decoding chip, microphone integration, and TF card slot facilitate rich multimedia experiences, making it ideal for developing smart devices like AI speakers and interactive HMI screens. Dynamic Lighting Effects: Equipped with 7x programmable surround RGB LEDs, the board allows the creation of vibrant and colorful lighting effects, enhancing user interaction and visual appeal for projects. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

Device & System Support: for Raspberry Pi 5 / CM5, Supports Raspberry Pi OS, 10-point touch; For RK3576: Supports Buildroot, Debian, and Android, 10-point touch IPS Display Panel: Excellent Display Performance, 178° Wide Viewing Angle 10-Point Capacitive Touch: up to 10-point touch, depending on the operating system; up to 6H hardness toughened glass panel; Optical bonding, display well. Adjustable Brightness Via Software Thinner And Space Saving: Integrates The Driver Circuit Into An FPC Cable, The Total Thickness Of The LCD Is Only 11.6mm

Compatible with Raspberry Pi Compute Module 4.Personal Network Storage Server.Built-In dual hard drive slots,support large capacity HDD storage.Video cache speed 113MB/s,100 music transmission time 40 seconds.(The actual transmission speed depends on the network speed ,the above data was tested with a Gigabit network). All-in-one Mini-Computer, mainly designed for home or small home office, but not limited to the above applications.Out of the box, no expert knowledge of networking and storage systems required.Easy to use, convenient to online access the documents, videos, and music at any time. Built-in 2x SATA slots for installing 2.5-inch Solid State Drives.2-inch SPI LCD screen for real-time monitoring the working status of CM4: CPU, RAM, system disk usage, network speed and temperature, etc. Rich interfaces.Aluminum alloy case design,alloy case for large area heat dissipation, with fan vents and nonskid feet at the bottom, better heat dissipation and more stable placement. Comes with Aluminum alloy case (2inch LCD included),CM4-NAS-Double-Deck,CM4-FAN-3007 and so on.

Excellent Display Performance With 170° Wide Viewing Angle; Supports backlight adjustment via software; The display orientation is portrait by default, with 720×1280 resolution (H×V). Change the software config for landscape display. up to 10-point touch, depending on the operating system; up to 6H hardness toughened glass panel; Optical bonding, provides clear image; Adopts anti-fingerprint panel coating, easy to clean. Drive the LCD through the DSI interface, with a refresh rate of up to 60Hz; Thinner and more space-saving: Integrates the driver circuit into an FPC cable, the total thickness of the LCD is only 9.3mm [Device & System Support] : Raspberry Pi: Supports Raspberry Pi OS, 10-point touch; ESP32-P4: Supports LVGL GUI programs, up to 10-point touch; RK3506: Supports Buildroot / Ubuntu, etc. 10-point touch; RK3576: Supports Buildroot / Debian / Ubuntu / Android, etc. 10-point touch Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.

Highly Integrated Smart Robot: The Pico2Go is an RP2350-Plus-based mobile robot featuring ultrasonic, LCD, BT, line-following, and obstacle-avoidance modules for IR/BT control, IR obstacle avoidance, Auto line following, Ultrasonic sensor, Object tracking, and more. Advanced Safety & Power Management: Includes batt protection (overcharge/discharge, overcurrent, short-circuit, reverse-proof) and supports concurrent charging/debugging via a recharge circuit. Precision Tracking & Sensors: Equipped with a 5-channel IR sensor (PID algorithm for stable line-following) and onboard sensors to eliminate messy wiring. Wireless Control & Display: Integrates BT for smartphone teleoperation (movement, RGB LED, buzzer) and a 1.14inch IPS colorful LCD display (240 x135 pixels, 65K colors). Durable Hardware: Uses N20 micro metal-gear motors (low noise, high accuracy) and runs on dual 14500 Li-ion batt (excluded) with real-time voltage monitoring. For more examples, refer to demo codes and manual on our wiki.

All-in-one Mini-Computer, mainly designed for home or small home office, but not limited to the above applications Out of the box, no expert knowledge of networking and storage systems required Built-in 2x SATA slots for installing 2.5-inch Solid State Drives 2-inch SPI LCD screen for real-time monitoring the working status of CM4: CPU, RAM, system disk usage, network speed and temperature, etc. Easy to use, convenient to online access the documents, videos, and music at any time Do not unplug any device except the USB when it is charged. In order to ensure the normal power supply of CM4, please do not connect other devices when using the Type C interface to program the image. When CM4 is in normal use, it needs to provide a 5V 2A or higher power supply for CM4. Otherwise, problems such as automatic shutdown and frequency reduction may occur. The module does not have any protection, please do not short-circuit the power supply. The Type C port can be used as a power supply or as a USB SLAVE interface to program images. USB2.0 is closed by default, if you want to open it, you need to add dtoverlay=dwc2,dr_mode=host in config.txt.

✨Dies ist ein offizielles Display von Waveshare.15,6 Zoll IPS-Bildschirm, 1920 x 1080 hohe Auflösung. ✨ Kapazitives Touchpanel aus gehärtetem Glas, 6H Härte, 10-Punkt-kapazitive Touch-Steuerung. ✨Bei Verwendung mit RPi unterstützt RPi OS / Ubuntu / Kali und Retropie. ✨ Bei Verwendung als Computermonitor unterstützt Windows 11/10/8.1/8/7. ✨Mehrsprachiges OSD-Menü, für Energieverwaltung, Helligkeits-/Kontrastanpassung usw. 3,5-mm-Audio-Buchse, unterstützt HDMI-Audio-Ausgang.

All versions are with 8GB EMMC. But onboard wifi and Luck-fox Poe module are optional, the product description page is universal for all versions. Please check the 'package content' image for what version you choose. Luck-fox Pico Ultra is a cost-effective Linux micro development board, based on the Rockchip RV1106 chip to provide a simple and efficient development platform for the developers, supports a variety of interfaces including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB, which is ideal for embedded applications. Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4 Built-in self-developed third-generation ISP3.2, supports 5-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc. Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size. Built-in 16-bit DRAM DDR3L, which is capable of sustaining demanding memory bandwidths

ESP32-S3-Touch-LCD-2 Onboard camera interface and TF card slot Embedded with ST7789T3 Display Driver and CST816D Capacitive Touch Chip Supports ESP-IDF, Arduino IDE.Comprehensive SDK, dev resources, and tutorials to help you easily get started IPS Display Panel.Excellent display performance, 262K color, wide viewing angle Supports OV2640 / 0V5640 and other mainstream cameras. suitable for image capture, video monitoring and other applications to meet different needs

Dedicated 40PIN LCD Connector.One Connection For Display And Touch, Support 70H-1024600-IPS-A Series Display.Easier And Faster To Be Integrated Into Applications. This HAT does not support POE. Standard CM4 Socket And Color-Coded Raspberry Pi 40PIN GPIO Header.Suitable For Compute Module 4 Lite/EMMC Series Module. Do not unplug any devices except USB and HDMI when powering on. Only support fans with 5V, and 12V is not supported. Please check the voltage of the fan before connecting. Only support LCD direct connection as there is not a DSI interface. Type C interface can be used as the power supply or the USB SLAVE for programming images. In order to ensure the power supply of the CM4, please do not connect to other devices when programming the images with the TypeC interface. When using CM4, you must provide 5V 2A for it, otherwise, it may shut down, lower frequency or etc. Please use the matching screws when using the M.2 interface as CM4 may be damaged if you use other screws. The module does not have any protection, please do not short-circuit the power supply. USB2.0 is closed by default, and you need to add "dtoverlay=dwc2,dr_mode=host" in "config.txt" when using.

Dies ist ein offizielles Display von Waveshare.11,6 Zoll IPS-Bildschirm, 1920 x 1080 hohe Auflösung. Kapazitives Touchpanel aus gehärtetem Glas, Härtegrad 6H. Bei der Arbeit mit RPi unterstützt es RPi OS / Ubuntu, Kali und Retropie, Single-Touch, und treiberfrei. Wenn Sie als Computermonitor arbeiten, unterstützt er Windows 11/10/8.1/8/7, 10-Punkt-Touch, und treiberfrei. Mehrsprachiges OSD-Menü, für Energieverwaltung, Helligkeits-/Kontrastanpassung usw. 3,5-mm-Audio-Buchse, unterstützt HDMI-Audio-Ausgang. Eingebetteter Ferrit-Hi-Fi-Lautsprecher. Unterstützt auch VGA-Eingang (spezifisches Kabel ist erforderlich und sollte separat erworben werden). 75 x 75 mm Abstand Befestigungslöcher (M4-Schraubenloch) für eine allgemeine Wandhalterung. Wird mit einem 75° Neigungswinkelständer geliefert.

There are several options for this item, this option is without wireless. Please click the image 2 to check the package content. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information. Luck-fox Pico Ultra is a cost-effective Linux micro development board, based on the Rockchip RV1106 chip to provide a simple and efficient development platform for developers, Supports a variety of interfaces including MIPI CSl, RGB LCD, GPIO, UART, SPI, I2C, USB, etc., which is ideal for embedded applications. Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The int8 computing power of RV1106G3 is 1TOPS, and RV1106G2 is 0.5TOPS Built-in self-developed third-generation ISP3.2, supports 5-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc. Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size Built-in 16-bit DRAM DDR3L, which is capable of sustaining demanding memory bandwidths

ESP32-S3-Touch-LCD-2.8,Integrates SPI Interface Display And 5-Point Capacitive Touch, Multiple Peripheral Interfaces IPS Display Panel,Excellent Display Performance, 262K Color, Wide Viewing Angle Capacitive 5-Point Touch,Supports Touch Function With I2C Interface, 5-Point Touch For Flexible Operation And Smooth Multi-Point UI Interaction Supports Multiple Peripherals,Supports The Expansion Of Multiple Peripherals Via GPIO, UART And I2C Interfaces, Etc. Supports WiFi & Bluetooth, With Onboard Antenna

ESP32-S3-Touch-LCD-2 with OV5640 Camera and TF card slot Embedded with ST7789T3 Display Driver and CST816D Capacitive Touch Chip Supports ESP-IDF, Arduino IDE.Comprehensive SDK, dev resources, and tutorials to help you easily get started IPS Display Panel.Excellent display performance, 262K color, wide viewing angle Supports OV2640 / 0V5640 and other mainstream cameras. suitable for image capture, video monitoring and other applications to meet different needs

Raspberry Pi Touch Display 2 with white case, supports five-point capacitive touch control. IPS display panel with hardware resolution of 720x1280 Compatible with Raspberry Pi 5/4B/CM4/3B+/3A+/3B/CM3+/CM3 Directly drive the LCD through the Raspberry Pi's DSI interface, with a refresh rate of up to 60Hz When used with Raspberry Pi, it is compatible with Bookworm/Bullseye/Buster systems Supports software to adjust the brightness of the backlight

Note:The display orientation is portrait by default, 1080×1920 resolution (H×V). Change the software config for landscape display.This is a 5.5inch AMOLED display. Compared with LCD, it has advantages of high contrast, wide color gamut, and wide viewing angle, which make it able to bring vivid and delicate visual experience. 5.5inch AMOLED, 1920x1080 resolution Toughened glass capacitive touch panel, 6H hardness Supports popular mini PCs such as Raspberry Pi,Jetson Nano, as well as general desktop computers When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie, driver free When works as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free 3.5mm audio jack, supports HDMI audio output M2.5 screw holes for easy mounting

3.5 Zoll SPI Touchscreen Display für Raspberry Pi Das 3.5 Zoll große SPI Touchscreen Display verfügt über eine Auflösung von 320 x 480 Pixeln und ist mit einem resistiven Touchpanel ausgestattet. Es nutzt eine LED-Hintergrundbeleuchtung und kann direkt über die GPIO-Schnittstelle auf alle Modelle des Raspberry Pi aufgesteckt werden. Die Stromversorgung sowie die Bild- und Touchscreen-Funktionalität erfolgen ebenfalls über die GPIO-Pins. Das Display besitzt die gleiche Größe wie der Raspberry Pi, was eine kompakte Integration ermöglicht. Unterstützt werden Betriebssysteme wie Raspbian und Ubuntu. Der integrierte Touchscreen-Controller XPT2046 sowie das SPI-Interface ermöglichen eine direkte Ansteuerung über das System. Die Installation der notwendigen Treiber erfolgt analog zu den Displays des Herstellers Waveshare. Weitere Informationen sind über die bereitgestellte Dokumentation zugänglich. Das 3.5 Zoll SPI Touchscreen Display wird direkt auf die

ESP32-P4-WIFI6-POE-ETH Development Board only(without Raspberry Pi Camera (B) and DSI LCD display). High-performance MCU with RISC-V 32-bit dual-core and single-core processors 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP Static RAM, 8 KB TCM Powerful image and voice processing capability. Provides image and voice processing interfaces including JPEG Codec, Pixel Processing Accelerator, Image Signal Processor, H264 encoder. 32MB PStatic RAM in the chip's package, with onboard 32MB Nor Flash Commonly used peripherals such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 TF card slot, microphone, speaker header and RTC Batt. header, etc. Adapting 2*20 GPIO headers with 28 x remaining programmable GPIOs Security features: Secure Boot, Flash Encryption, cryptographic accelerators, and TRNG. Additionally, hardware access protection mechanisms help to enable Access Permission Management and Privilege Separation

✨Dies ist ein offizielles Display von Waveshare.11,6 Zoll IPS-Bildschirm, 1920 x 1080 hohe Auflösung. Gehärtetes Glas, kapazitives Touchpanel, 6H Härte. ✨ Bei der Arbeit mit RPi unterstützt es RPi OS / Ubuntu / Kali und Retropie, Single Touch und Treiberfrei. Wenn Sie als Computermonitor arbeiten, unterstützt es Windows 11/10/8.1/8/7, 10-Punkt-Touch, und treiberfrei. ✨Mehrsprachiges OSD-Menü, für Energieverwaltung, Helligkeits-/Kontrastanpassung usw. 3,5-mm-Audiobuchse, unterstützt HDMI-Audioausgabe. ✨Eingebetteter Ferrit-HiFi-Lautsprecher. Unterstützt auch VGA-Eingang (spezifisches Kabel ist erforderlich und sollte separat erworben werden). ✨75 x 75 mm Abstand Befestigungslöcher (M4 Schraubenloch) für eine allgemeine Wandhalterung. Wird mit einem 75° Neigungswinkel geliefert.

ESP32-S3 4.3inch Capacitive Touch Display Development Board Type B,Integrates RGB Interface LCD With 5-Point Capacitive Touch, Multiple Peripheral Interfaces IPS Display Panel,Excellent Display Performance, 160° Wide Viewing Angle Capacitive 5-Point Touch,Supports Touch Function With I2C Interface, 5-Point Touch For Flexible Operation And Smooth Multi-Point UI Interaction Supports Multiple Peripherals,Supports The Expansion Of Multiple Peripherals Via CAN, RS485, I2C And Isolated IO Interfaces Supports Two Wiring Methods,Comes With Two Types Of Screw Terminals, Allowing For Bottom Or Back Wiring, Which Is More Convenient To Integrate Into Various Application Scenarios Such As DIN Rail Or Embedded Devices

Pi5 All-in-one Display (with Raspberry Pi 5-4GB pre-installed). 7inch DSI touch screen, 10-point capacitive touch control. IPS display panel with hardware resolution of 720x1280 Using optical bonding process to ensure clearer pictures and reduce light reflection. Toughened glass capacitive touch panel, hardness up to 6H Using AF anti-fingerprint process, not easy to get fingerprints and easy to clean. Dual 4Kp60 HDMI display output. Supports Raspberry Pi 5/4 all-in-one installation Directly drive the LCD by the DSI interface on the Raspberry Pi, with up to 60Hz refreshing rate. Aluminum alloy case with passive cooling design Supports Bookworm system without driver when used with Raspberry Pi. Supports software control of backlight brightness. Embedded installation, compatible with VESA standard bracket installation

All versions are with 8GB EMMC. But onboard wifi and Luck-fox Poe module are optional, the product description page is universal for all versions. Please check the 'package content' image for what version you choose. Luck-fox Pico Ultra is a cost-effective Linux micro development board, based on the Rockchip RV1106 chip to provide a simple and efficient development platform for the developers, supports a variety of interfaces including MIPI CSI, RGB LCD, GPIO, UART, SPI, I2C, USB, which is ideal for embedded applications. Single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU. Built-in Rockchip self-developed 4th generation NPU, features high computing precision and supports int4, int8, and int16 hybrid quantization. The computing power of int8 is 0.5 TOPS, and up to 1.0 TOPS with int4 Built-in self-developed third-generation ISP3.2, supports 5-Megapixel, with multiple image enhancement and correction algorithms such as HDR, WDR, multi-level noise reduction, etc. Features powerful encoding performance, supports intelligent encoding mode and adaptive stream saving according to the scene, saves more than 50% bit rate of the conventional CBR mode so that the images from camera are high-definition with smaller size. Built-in 16-bit DRAM DDR3L, which is capable of sustaining demanding memory bandwidths

ESP32-P4-WIFI6-POE-ETH Development Board with Raspberry Pi Camera (B) and 10.1-inch DSI LCD display. High-performance MCU with RISC-V 32-bit dual-core and single-core processors 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP Static RAM, 8 KB TCM Powerful image and voice processing capability. Provides image and voice processing interfaces including JPEG Codec, Pixel Processing Accelerator, Image Signal Processor, H264 encoder. 32MB PStatic RAM in the chip's package, with onboard 32MB Nor Flash Commonly used peripherals such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 TF card slot, microphone, speaker header and RTC Batt. header, etc. Adapting 2*20 GPIO headers with 28 x remaining programmable GPIOs Security features: Secure Boot, Flash Encryption, cryptographic accelerators, and TRNG. Additionally, hardware access protection mechanisms help to enable Access Permission Management and Privilege Separation

ESP32-S3 1.43inch AMOLED Development Board,466 × 466 Resolution, AMOLED Round Display, Onboard Multiple Interfaces Adopts AMOLED screen,The next-generation display technology, compared to those traditional LCD displays, the AMOLED screen features precise light-control capability, representing more delicate colors, more picture details, and more vivid video image 178° wide viewing angle,Excellent Display Performance, 16.7M color, wide viewing angle Supports ESP-IDF, Arduino IDE.Comprehensive SDK, dev resources, tutorials to help you easily get started Wi-Fi and BLE 5 support.ESP32-S3 integrates 2.4 GHz Wi-Fi (802.11 ax/b/g/n) with 40 MHz of bandwidth support, Its Bluetooth Low Energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh