esp32 development board

Powerful core and large memory---Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor with a main frequency of up to 240MHz, built-in 512KB SRAM, 384KB ROM, stacked 8MB PS RAM and external 16MB Flash. Dual-mode wireless and high-definition round screen---Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth BLE 5, onboard antenna; integrated 1.75-inch high-definition circular AMOLED capacitive touch screen with resolution 466×466, supports 16 million colors, uses CO5300 driver and CST9217 touch chip, communicates efficiently through QSPI and I2C interfaces, has high contrast, wide viewing angle and fast response. Dual microphone noise reduction and six-axis sensing---Integrated dual microphone array and echo cancellation circuit support noise reduction algorithm, accurate speech recognition and far/near field voice wake-up; the onboard QMI8658 six-axis inertial measurement unit can realize motion posture detection and step counting functions. Efficient power supply and precise timing---It adopts AXP2101 high-efficiency power management solution to support multiple configurable voltage outputs and batt charge and discharge management; it integrates PCF85063 R T C chip and connects to the batt through AXP2101 to achieve uninterrupted power supply and optimize batt life. (Batt is not included) Rich extension and interactive design---Provides Type-C interface, 3.7V MX1.25 lithium batt interface, Micro SD card slot and 8PIN 2.54mm header (leading to GPIO, UART, I2C and other interfaces); equipped with PWR and BOOT dual custom side buttons, combined with low-power audio codec chip, provides a complete development platform.(Batt is not included) We provide Online How-to-use Document/User Manual for reference：//bit.ly/4aaYa9S

The WiFi LoRa 32 (V3) is a feature-rich IoT development board ideal for projects in cities, agriculture, industrial control, and more. This...

Powerful core and large memory---Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor with a main frequency of up to 240MHz, built-in 512KB SRAM, 384KB ROM, stacked 8MB PS RAM and external 16MB Flash. Dual-mode wireless and high-definition round screen---Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth BLE 5, onboard antenna; integrated 1.75-inch high-definition circular AMOLED capacitive touch screen with resolution 466×466, supports 16 million colors, uses CO5300 driver and CST9217 touch chip, communicates efficiently through QSPI and I2C interfaces, has high contrast, wide viewing angle and fast response. Dual microphone noise reduction and six-axis sensing---Integrated dual microphone array and echo cancellation circuit support noise reduction algorithm, accurate speech recognition and far/near field voice wake-up; the onboard QMI8658 six-axis inertial measurement unit can realize motion posture detection and step counting functions. Efficient power supply and precise timing---It adopts AXP2101 high-efficiency power management solution to support multiple configurable voltage outputs and batt charge and discharge management; it integrates PCF85063 R T C chip and connects to the batt through AXP2101 to achieve uninterrupted power supply and optimize batt life. (Batt is not included) Rich extension and interactive design---Provides Type-C interface, 3.7V MX1.25 lithium batt interface, Micro SD card slot and 8PIN 2.54mm header (leading to GPIO, UART, I2C and other interfaces); equipped with PWR and BOOT dual custom side buttons, combined with low-power audio codec chip, provides a complete development platform.(Batt is not included) We provide Online How-to-use Document/User Manual for reference：//bit.ly/3OhxRWV

The ESP32-S3-Touch-AMOLED-1.32 is a compact 1.32inch AMOLED capacitive touch display development board. Onboard power management module, low power audio codec circuit, and MIC, adapting 12PIN expansion I/O interface, Li Batt. header, and speaker header, suitable for applications such as AI voice agents Equipped with ESP32-S3 high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), onboard antenna. QSPI and I2C communication respectively, effectively saving the IO resources. Built-in 512KB of Static RAM and 384KB ROM, with onboard 8MB PStatic RAM and 8MB Flash memory Onboard 1.32inch AMOLED capacitive touch display for clear color picture display, 466 x 466 resolution, 16.7M color. Built-in CO5300 display driver and CST820 capacitive touch chip, using Onboard PWR and BOOT programmable buttons for easy custom function development Onboard 3.7V MX1.25 Li Batt. recharge/discharge header. Equipped with the ES8311 low-power audio codec chip, supports high-quality audio input and output to meet diverse application needs such as speech interaction and audio playback Adapting SH1.0 12PIN expansion interface for DIY functionality expansion. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc.

The WiFi LoRa 32 (V3) is a feature-rich IoT development board ideal for projects in cities, agriculture, industrial control, and more. This...

The ESP32-C6-Touch-AMOLED-1.43-B(with protective case) is a high-performance, highly integrated MCU board, integrates high-capacity Flash. Onboard 1.43inch AMOLED capacitive touch display, highly integrated RTC chip, 6-axis IMU, TF card slot, low power audio encoding and decoding chips, dual MIC circuit, Li batt(Not included) header, and so on. Reserved USB, UART, I2C, and GPIO interfaces for flexible expansion, which makes it easy for you to develop and integrate into the products quickly Equipped with ESP32-C6 high-performance 32-bit RISC-V processor with clock speed up to 160 MHz. Integrated WiFi 6, BT 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance. Built-in 512KB HP SRAM, 16KB LP SRAM, 320KB ROM and 16MB Flash memory. With CNC metal case, with clear and colorful label on the back, nice looking and easy to carry Onboard 1.43inch AMOLED capacitive touch display for clear color picture display, 466x466 resolution, 16.7M color. Built-in CO5300 display driver and FT6146 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc. Equipped with dual digital microphone array, supporting richer voice interaction functions, suitable for accurate speech recognition and near-field / far-field voice wake-up applications. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc.. Onboard UART and I2C SH1.0 4PIN connectors, reserved two 2x4PIN 2.54mm pitch headers Onboard PCF85063 RTC chip for RTC functionality requirement. Onboard PWR and BOOT programmable buttons for easy custom function development. Onboard 3.7V MX1.25 Li batt(Not included) recharge/discharge header. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design

The ESP32-C6-Touch-AMOLED-1.43(without protective case) is a high-performance, highly integrated MCU board, integrates high-capacity Flash. Onboard 1.43inch AMOLED capacitive touch display, highly integrated RTC chip, 6-axis IMU, TF card slot, low power audio encoding and decoding chips, dual MIC circuit, Li batt(Not included) header, and so on. Reserved USB, UART, I2C, and GPIO interfaces for flexible expansion, which makes it easy for you to develop and integrate into the products quickly Equipped with ESP32-C6 high-performance 32-bit RISC-V processor with clock speed up to 160 MHz. Integrated WiFi 6, BT 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance. Built-in 512KB HP SRAM, 16KB LP SRAM, 320KB ROM and 16MB Flash memory Onboard 1.43inch AMOLED capacitive touch display for clear color picture display, 466x466 resolution, 16.7M color. Built-in CO5300 display driver and FT6146 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc. Equipped with dual digital microphone array, supporting richer voice interaction functions, suitable for accurate speech recognition and near-field / far-field voice wake-up applications. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc.. Onboard UART and I2C SH1.0 4PIN connectors, reserved two 2x4PIN 2.54mm pitch headers Onboard PCF85063 RTC chip for RTC functionality requirement. Onboard PWR and BOOT programmable buttons for easy custom function development. Onboard 3.7V MX1.25 Li batt(Not included) recharge/discharge header. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design

The ESP32-C6-Touch-AMOLED-1.32 is a compact 1.32inch AMOLED capacitive touch display development board. Onboard power management module, low power audio codec circuit, and MIC, adapting 12PIN expansion I/O interface, Li Batt. header, and speaker header, suitable for applications such as AI voice agents Equipped with ESP32-C6 high-performance 32-bit RISC-V processor, up to 160MHz main frequency. Integrated WiFi 6, BT 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance. Built-in 512KB HP Static RAM, 16KB LP Static RAM, 320KB ROM and 16MB Flash memory Onboard 1.32inch AMOLED capacitive touch display for clear color picture display, 466 x 466 resolution, 16.7M color. Built-in CO5300 display driver and CST820 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Onboard PWR and BOOT programmable buttons for easy custom function development Onboard 3.7V MX1.25 Li Batt. recharge/discharge header. Equipped with the ES8311 low-power audio codec chip, supports high-quality audio input and output to meet diverse application needs such as speech interaction and audio playback Adapting SH1.0 12PIN expansion interface for DIY functionality expansion. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc.

4. Integrierte -Reset-Taste und programmierbare IO0-Taste 3. Integrierter Gleichstromversorgungskreis, Stromversorgungsmodus unterst¨¹tzt DC5V/12V/24V, die Stromversorgungsleistung sollte als 20W sein 2. Der E/A-Port und der UART-Programm-Download-Port des Moduls sind alle herausgef¨¹hrt, um die sekund?re Entwicklung zu erleichtern. 1. Integriertes ausgereiftes und stabiles ESP32-WROOM-32E- mit gro?er Kapazit?t von 4 MByte Flash 5. ESP32/ESP8266 unterst¨¹tzt Kompilierungstools der f¨¹r ArduinoIDE und bietet Referenzprogramme f¨¹r die f¨¹r -Entwicklungsumgebung.

Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor at 240MHz, supporting 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) with onboard antenna. Built-in 512KB Static RAM and 384KB ROM, stacked with 8MB PStatic RAM and external 16MB Flash Type-C interface for user convenience and device compatibility. The onboard 3.5-inch capacitive touch HD IPS screen with 320x480 resolution and 262K colors can clearly display color pictures. Built-in AXS15231B display driver integrated chip, using QSPI and I2C interface communication On-board QMI8658 6-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope), which can detect the device's deflection status, pedometer and other functions. Advantages of using the AXP2101 include efficient power management, support for multiple output voltages, charge management and batt management functions, and optimization of batt life The PCF85063 RTC chip is on board. With AXP2101, the batt (NOT Included) can be connected to realize uninterrupted power supply, and the batt backup pad is reserved to ensure that the RTC function continues to work when the main batt is replaced. Two customizable side buttons for PWR and BOOT are on board, which are convenient for custom function development. Onboard 3.7V MX1.25 Li batt (NOT Included) charging and discharging interface I2C, UART, USB and multiple GPIOs for external devices and debugging, flexible configuration of peripheral functions. Onboard Micro TF card slot provides extended storage, fast data transfer and flexibility for data recording and media playback, simplifying circuit design. On-board camera interface, supports OV5640 (NOT Included), OV2640 (NOT Included) and other mainstream cameras

Flexible WLAN-Modi: Funktioniert als eigenständiger Zugangspunkt oder verbindet sich mit einem vorhandenen 2,4 GHz WLAN-Netzwerk. Enthält eine integrierte Webschnittstelle für Konfiguration und Steuerung. 【Robuste ESP32-S2-Architektur】Angetrieben durch das leistungsstarke ESP32-S2-WROVER-Modul mit einem 240 MHz Xtensa LX7-Prozessor. Diese kompakte Erweiterungsplatine bietet außergewöhnliche Rechenleistung und stabile drahtlose Konnektivität für anspruchsvolle benutzerdefinierte Firmware-Projekte. Flipper Zero nicht im Lieferumfang enthalten. Wird nur als Referenz angezeigt

Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor at 240MHz, supporting 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) with onboard antenna. Built-in 512KB Static RAM and 384KB ROM, stacked with 8MB PStatic RAM and external 16MB Flash Type-C interface for user convenience and device compatibility. The onboard 3.5-inch capacitive touch HD IPS screen with 320x480 resolution and 262K colors can clearly display color pictures. Built-in AXS15231B display driver integrated chip, using QSPI and I2C interface communication On-board QMI8658 6-axis inertial measurement unit (3-axis acceleration, 3-axis gyroscope), which can detect the device's deflection status, pedometer and other functions. Advantages of using the AXP2101 include efficient power management, support for multiple output voltages, charge management and batt management functions, and optimization of batt life The PCF85063 RTC chip is on board. With AXP2101, the batt (NOT Included) can be connected to realize uninterrupted power supply, and the batt backup pad is reserved to ensure that the RTC function continues to work when the main batt is replaced. Two customizable side buttons for PWR and BOOT are on board, which are convenient for custom function development. Onboard 3.7V MX1.25 Li batt (NOT Included) charging and discharging interface I2C, UART, USB and multiple GPIOs for external devices and debugging, flexible configuration of peripheral functions. Onboard Micro TF card slot provides extended storage, fast data transfer and flexibility for data recording and media playback, simplifying circuit design. On-board camera interface, supports OV5640 (Included), OV2640 (NOT Included) and other mainstream cameras

The ESP32-S3-Touch-AMOLED-1.75C is a high-performance, highly integrated MCU board designed by Waveshare. It features a CNC-machined aluminum alloy case, offering a compact and premium appearance. Onboard 1.75inch AMOLED capacitive touch display, highly integrated power management chip, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC chip, low power audio codec, echo cancellation circuit, and so on Built-in speaker and with reserved space for Li Batt, providing powerful support for rapid development and product prototype validation. Equipped with high-performance ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built-in 512KB Static RAM and 384KB ROM, with onboard 8MB PStatic RAM and an external 32MB Flash memory Type-C port, improving device compatibility, easier to use. Onboard 1.75inch AMOLED capacitive touch display for clear color picture display, 466 x 466 resolution, 16.7M color. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc Built-in CO5300 display driver and CST9217 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Equipped with a dual-microphone array, enabling audio algorithms such as noise reduction and echo cancellation, suitable for accurate voice recognition and near-field / far-field voice wake-up applications Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PWR and BOOT programmable buttons for easy custom function development. Onboard 3.7V MX1.25 Li Batt recharge/discharge header. Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, Batt charging, Batt management, and Batt life optimization, etc

Flexible Wi-Fi-Modi: funktioniert als eigenständiger Zugangspunkt oder stellt eine Verbindung zu einem bestehenden 2,4-GHz-WLAN-Netzwerk her. Enthält eine integrierte Webschnittstelle für Konfiguration und Steuerung. 【Robuste ESP32-S2-Architektur】Angetrieben durch das leistungsstarke ESP32-S2-WROVER-Modul mit einem 240 MHz Xtensa LX7-Prozessor. Dieses kompakte Zusatzboard bietet außergewöhnliche Rechenleistung und stabile drahtlose Konnektivität für anspruchsvolle benutzerdefinierte Firmware-Projekte. Flipper Zero nicht im Lieferumfang enthalten. Wird nur als Referenz angezeigt

Equipped with high-performance ESP32-C6 32-bit RISC-V processor, up to 160MHz main frequency. Supports Wi-Fi 6, BT 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance, onboard antenna Built-in 512KB HP Static RAM, 16KB LP Static RAM, 320KB ROM, and external 16MB Flash memory. Type-C port, improving device compatibility, easier to use. Onboard 2.16inch AMOLED capacitive touch display for clear color picture display, 480 x 480 resolution, 16.7M color Built-in CO5300 display driver and CST9220 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard KEY and BOOT programmable buttons for easy custom function development. Adapting 1 x I2C, 1 x UART and 1 x USB pads for external devices connection and debugging Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc.

The ESP32-S3-Touch-LCD-4.3C(Standard version, without case) integrates a 4.3inch capacitive touch display and an audio module, supporting AI speech interaction and the LVGL graphical interface. Combining display, touch, and voice in one device, it enables easy development of intelligent human-machine interaction terminals Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM Onboard 4.3inch capacitive touch display, 800 x 480 resolution, 65K color. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Onboard ES8311 audio codec chip and ES7210 echo cancellation circuit. Onboard voltage regulator, supports 7 ~ 36V wide range power supply Onboard RTC chip and Batt holder to ensure time data is not lost during power loss when Batt is installed. Onboard I2C interface, TF card slot, MX1.25 2PIN Batt header, and digital isolated IO interfaces, etc. Supports passive and active digital input with bi-directional optocoupler isolation, and the active digital input supports positive and negative voltages Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current. Onboard LED indicators for indicating the power and Batt recharging status. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios

The ESP32-S3-Touch-LCD-4.3C-BOX(With plastic case) integrates a 4.3inch capacitive touch display and an audio module, supporting AI speech interaction and the LVGL graphical interface. Combining display, touch, and voice in one device, it enables easy development of intelligent human-machine interaction terminals Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM Onboard 4.3inch capacitive touch display, 800 x 480 resolution, 65K color. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Onboard ES8311 audio codec chip and ES7210 echo cancellation circuit. Onboard voltage regulator, supports 7 ~ 36V wide range power supply Onboard RTC chip and Batt holder to ensure time data is not lost during power loss when Batt is installed. Onboard I2C interface, TF card slot, MX1.25 2PIN Batt header, and digital isolated IO interfaces, etc. Supports passive and active digital input with bi-directional optocoupler isolation, and the active digital input supports positive and negative voltages Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current. Onboard LED indicators for indicating the power and Batt recharging status. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios

Equipped with High-performance ESP32 Xtensa 32-bit LX6 single-core / dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (IEEE 802.11b/g/n) and BT V4.2 full specification, including traditional BT (BR/EDR) and BT Low Energy (BLE), with onboard antenna Built-in 520KB of Static RAM and 448KB ROM, with onboard 2MB PSratic RAM and an external 16MB Flash memory. Onboard USB Type-C port for power supply, program downloading, and debugging, easier to use Onboard 3.5inch capacitive touch IPS display for clear color picture display, 320 x 480 resolution, 262K color. Built-in ST7796 display driver and FT6336 capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources Onboard PCF85063 RTC chip, powered by Lithium batt. through AXP2101 chip, with reserved RTC batt. header for connecting a backup batt., ensuring RTC function during the replacement of the main batt. Onboard PWR and BOOT programmable buttons for easy custom function development. Onboard 3.7V MX1.25 Lithium Batt. recharge/discharge header. Adapting I2C, UART, USB and multiple GPIOs for external device connection and debugging, enabling flexible peripheral configuration. Onboard TF card slot for extended storage, supports external TF card for storing images or files. Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, batt. charging, batt. management, and batt. life optimization, etc.

ESP32-S3-Touch-LCD-2.8,Integrates SPI Interface Display And 5-Point Capacitive Touch, Multiple Peripheral Interfaces IPS Display Panel,Excellent Display Performance, 262K Color, Wide Viewing Angle Capacitive 5-Point Touch,Supports Touch Function With I2C Interface, 5-Point Touch For Flexible Operation And Smooth Multi-Point UI Interaction Supports Multiple Peripherals,Supports The Expansion Of Multiple Peripherals Via GPIO, UART And I2C Interfaces, Etc. Supports WiFi & Bluetooth, With Onboard Antenna

Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Onboard dual 1.28inch LCD displays, 240x240 resolution, 65K color, without touch function Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built-in 512KB Static RAM and 384KB ROM, with onboard 8MB PStatic RAM and 16MB Flash Onboard ES8311 audio codec and ES7210 audio ADC chip, equipped with standard microphone and speaker header, supports AI speech interaction Onboard TF card slot for convenient local storage expansion, and supports the storing and reading of data, images, audio files, and more Onboard Li batt recharge management module, reserved 3.7V Li batt power supply header. Onboard SH1.0 14PIN connector, adapting UART, I2C and some IO interfaces, for easy DIY customization

The ESP32-S3-DualEye-Touch-LCD-1.28 is an AIoT microcontroller development board based on ESP32-S3 with double eye LCD displays, designed for makers and electronics enthusiasts, supporting 2.4GHz Wi-Fi and BT BLE 5 It integrates high-capacity Flash and PStatic RAM, onboard dual 1.28inch LCD displays which can smoothly run GUI programs such as LVGL Additionally, it also integrates a microphone, speaker header, Li batt recharge circuit, and reserves a TF card slot and DIY expansion connectors It is suitable for the quick development based on ESP32-S3 such as HMI (Human-Machine Interface), double eye robotic agents, and AI voice-interactive device Whether you want to build a robot that can "wink", create an intelligent IoT Interface, design touch-controlled games, or develop futuristic wearable devices, this board is an ideal choice

Equipped with high-performance ESP32-S3-PICO-1-N8R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna Built-in 512KB Static RAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash. Type-C port, improving device compatibility, easier to use. Onboard 1.43inch AMOLED capacitive touch display for clear color picture display, 466 × 466 resolution, 16.7M color Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc. Built-in CO5300 display driver and CST820 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources Equipped with a dual-microphone array, enabling audio algorithms such as noise reduction and echo cancellation, suitable for accurate voice recognition and near-field / far-field voice wake-up applications. Onboard BOOT programmable button for easy custom function development Onboard 3.7V MX1.25 Lithium Batt recharge/discharge header. Adapting 1 × I2C, 1 × UART and 1 × USB pads for external devices connection and debugging, enabling flexible configuration of peripheral functions

ESP32-S3 1.47inch display microcontroller development board equipped with 32-bit LX7 dual-core processor, up to 240MHz main frequency, supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna ESP32-S3 development board onboard 1.47inch LCD display, 172×320 resolution, 262K color Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Built-in RGB LED with clear acrylic sandwich panel for cool lighting effects Adapting multiple IO interfaces, integrates full-speed USB port, onboard TF card slot for external TF card storage of pictures or files, supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

ESP32-C6-Touch-AMOLED-2.16-EN, Standard version, without Li Batt. Equipped with high-performance ESP32-C6 32-bit RISC-V processor, up to 160MHz main frequency. Supports Wi-Fi 6, BT 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance, onboard antenna Built-in 512KB HP Static RAM, 16KB LP Static RAM, 320KB ROM, and external 16MB Flash memory. Type-C port, improving device compatibility, easier to use. Onboard 2.16inch AMOLED capacitive touch display for clear color picture display, 480 x 480 resolution, 16.7M color Built-in CO5300 display driver and CST9220 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard KEY and BOOT programmable buttons for easy custom function development. Adapting 1 x I2C, 1 x UART and 1 x USB pads for external devices connection and debugging Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc.

Integriertes kapazitives 1,35-Zoll-AMOLED-Touch-Display für klare Farbbildanzeige, 466 × 466 Auflösung, 16,7 m Farbe Ausgestattet mit ESP32-C6 Hochleistungs-32-Bit-RISC-V-Prozessor, bis zu 160 MHz Hauptfrequenz Integrierter 512 KB HP statischer RAM, 16 KB LP statischer RAM, 320 KB ROM und 16 MB Flash-Speicher Integrierter CO5300-Display-Treiber und CST820 kapazitiver Touch-Chip, mit QSPI- und I2C-Kommunikation, wodurch die IO-Ressourcen effektiv gespart werden Ausgestattet mit dem ES8311 Low-Power-Audio-Codec-Chip, unterstützt hochwertigen Audioeingang und -ausgang, um verschiedene Anwendungsanforderungen wie Sprachinteraktion und Audiowiedergabe zu erfüllen

A microcontroller development board with 5inch capacitive touch display, can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications 800x480 resolution, 65K color. 160° Viewing Angle. Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Supports passive and active digital input, with bi-directional optocoupler isolation Onboard voltage regulator, supports 7~36V wide range power supply. Onboard RTC chip and rechargeable batt to ensure time data is not lost when power loss. Onboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P batt header and digital isolated IO interfaces, etc. Onboard LED indicators for indicating the power and batt recharging status. Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios

ESP32-C6 2.8inch IPS capacitive touch display development board,Integrates SPI interface display, 240 × 320 resolution, multiple peripheral interfaces Equipped with the ESP32-C3FH4 controller chip, featuring a RISC-V 32-bit single-core low-power SoC, running at up to 160 MHz Supports multiple peripherals.Supports the expansion of multiple peripherals via GPIO, UART and I2C interfaces, etc. IPS Display Panel.262K color, 240 × 320 resolution, wide viewing angle Supports ESP-IDF, Arduino IDE.Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

ESP32-Touch-LCD-3.5-EN, Standard version, without Lithium Batt. Equipped with High-performance ESP32 Xtensa 32-bit LX6 single-core / dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (IEEE 802.11b/g/n) and BT V4.2 full specification, including traditional BT (BR/EDR) and BT Low Energy (BLE), with onboard antenna Built-in 520KB of Static RAM and 448KB ROM, with onboard 2MB PSratic RAM and an external 16MB Flash memory. Onboard USB Type-C port for power supply, program downloading, and debugging, easier to use Onboard 3.5inch capacitive touch IPS display for clear color picture display, 320 x 480 resolution, 262K color. Built-in ST7796 display driver and FT6336 capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources Onboard PCF85063 RTC chip, powered by Lithium batt. through AXP2101 chip, with reserved RTC batt. header for connecting a backup batt., ensuring RTC function during the replacement of the main batt. Onboard PWR and BOOT programmable buttons for easy custom function development. Onboard 3.7V MX1.25 Lithium Batt. recharge/discharge header. Adapting I2C, UART, USB and multiple GPIOs for external device connection and debugging, enabling flexible peripheral configuration. Onboard TF card slot for extended storage, supports external TF card for storing images or files. Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, batt. charging, batt. management, and batt. life optimization, etc.

Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Supports passive and active digital input, with bi-directional optocoupler isolation Onboard 4.3inch capacitive touch display, 800x480 resolution, 65K color. Onboard voltage regulator, supports 7~36V wide range power supply Onboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P batt header and digital isolated IO interfaces, etc. Onboard LED indicators for indicating the power and batt recharging status Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios

ESP32-S3 with 2.1inch Capacitive Touch Round Display Development Board (with 2.5D Curved Touch Panel), integrates high-capacity Flash and PSRAM. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz W-i-F-i (802.11 b/g/n) and Blue-too-th 5 (LE), with onboard antenna. Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard Onboard 2.1inch capacitive touch display, 480x480 resolution, 262K color, can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications. Supports touch control via I2C interface, with interrupt support. Adapting UART, I2C and some IO interfaces, integrates full-speed USB port. Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios.