waveshare lcd

✅Device & System Support: Supports all versions of Raspberry Pi. Support Jetson Nano/Jetson Orin Nano. Supports Windows 11 / 10 / 8.1 / 8 / 7, 10-point touch, driver free. Support Game Console and Smartphone ✅Configurable Display Orientation: The display orientation is landscape by default, 1920x1080 Resolution (H×V). You can change the software config to portrait display ✅Wide Viewing Angle: Excellent display & color performance. Wide viewing angle up to 178°, color gamut up to 72% NTSC ✅10-Point Capacitive Touch: Up to 10-point touch, depending on the operating system. Up to 6H hardness toughened glass panel. Optical bonding, display well and dustproof ✅Rich E-manuals & Tutorials: Provide rich electronic manuals and tutorials. Please contact sales for more information.

Supports touch control via I2C interface, with interrupt support. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 2.8inch LCD display, 480x640 resolution Adapting UART, I2C and some IO interfaces, integrates full-speed USB port. Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and batt recharge management module, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

Triple-core ARM Cortex-A7 32-bit core, with integrated VFP to support single- and double-precision floating-point operations Built-in ARM Cortex-M0 MCU design, supports SMP and AMP configuration Supports DDR2 / DDR3 / DDR3L memory interface expansion, meeting various expansion needs The low-speed interfaces adopt Rockchip Matrix IO design, which allows rich function signals to share the limited chip pins, making peripheral circuit adaptation more flexible Built-in audio and video codec, supports multiple audio inputs and outputs, providing high-quality audio playback and recording functions

7-Zoll IPS-Display mit einer hohen Auflösung von 1024x600. Kompatibel mit Raspberry Pi 2B, 3B, Zero und Zero W. Das TFT-LCD wird direkt über die DPI-Schnittstelle des Raspberry Pi angesteuert und bietet eine Bildwiederholfrequenz von bis zu 60 Hz. Die Hintergrundbeleuchtung kann ausgeschaltet werden, um den Stromverbrauch zu senken.

【ESP32-S3 1.85″ LCD Development Board】Integrates QSPI interface display, multiple peripheral interfaces 【IPS Display Panel】262K color, 360×360 resolution, wide viewing angle 【Supports multiple peripherals】Supports the expansion of multiple peripherals via GPIO and I2C interfaces, etc. 【Display control chip】Display: ST77916 【Package Content】ESP32-S3-LCD-1.85 x1，2030 8Ω 2W speaker ×1，SH1.0 4PIN cable ~100mm ×2

Processor & Performance: Features an Xtensa 32-bit LX7 dual-core processor, up to 240MHz, for efficient performance. Connectivity: Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with an onboard antenna for wireless communication. Memory: Equipped with 512KB SRAM, 384KB ROM, 8MB PSRAM, and 8MB Flash for ample storage and smooth operation; Display: Onboard 4.3inch LCD display, 800×480 resolution, 65K color Peripheral Interfaces: Features CAN, RS485, I2C, USB, TF card slot, and power-saving controls for flexible development and low power consumption.

720×1280 Resolution, Optical Bonding Toughened Glass Panel, HDMI Interface, IPS Panel, 5-Point Touch The display orientation is portrait by default, 720×1280 resolution (H×V). Change the software config for landscape display. Supports all versions of Raspberry Pi; Supports Ubuntu, single point touch, driver free; Supports Windows 11 / 10 / 8.1 / 8 / 7, 5-point touch, driver free Up to 5-point touch, depending on the operating system; Up to 6H hardness toughened glass panel; Optical Bonding, display well

ESP32-S3-LCD-1.3-C(with Case and Prism Cube), a low-cost, high-performance MCU board equipped with 240MHz dual-core processor. It is compact in size, with onboard 1.3inch 262K color LCD display, Lithium batt recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RGB LCD, and Wi-Fi / BT antenna, which makes it easy for you to develop and integrate it into products quickly. Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. comes with prism cube to enhance the optical display effect and greater expandability Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, keeps it up to date, easier to use. Onboard 1.3inch 240x240 pixels 262K display for clear and colorful pictures Built-in ST7789V2 display driver, using SPI communication, effectively saving the IO resources. Adapting 13PIN 2.54mm GPIO header for connecting peripherals and debugging, supports flexible configuration of pin functions Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures and other applications. Onboard 3.7V MX1.25 lithium batt recharge / discharge header

ESP32-C6-GEEK, a geek development board, onboard USB-A male port, 1.14inch LCD display, TF card slot, and other peripherals. Supports 2.4GHz Wi-Fi 6 and BLE 5, with integrated 16MB Flash, provides I2C header, UART header, and GPIO header, bringing more possibilities for your project Adopts high-performance 32-bit RISC-V processor, up to 160MHz main frequency. Built-in 512KB Static RAM, 320KB ROM, with onboard 16MB Flash memory Onboard 1.14inch 65K color IPS LCD display with 240 x 135 resolution. Integrated 2.4GHz Wi-Fi 6 and BT 5 (LE) dual-mode wireless communication Onboard TF card slot for an external TF card to store images and files. Onboard 3PIN UART header, 3PIN GPIO header and 4PIN I2C header Equipped with plastic case and cables. Provides online open-source demo and resources, more convenient for learning and development

Multi-Functional AI Voice Control​ – Integrate voice commands seamlessly for hands-free operation, boosting productivity and smart interaction. 20×0.85" Mechanical LCD Macro Keys​ – Customizable backlit keys with individual LCD screens for dynamic labeling, ideal for gaming, coding, or workflow automation. 2.8" Secondary Display​ – Supplementary screen shows real-time status, shortcuts, or system info, enhancing multitasking efficiency. Dual High-Precision Knobs​ – Adjustable dials for volume, brightness, or parameter control with tactile feedback—perfect for precise adjustments. Linux + QMK Dual-System Support​ – Flexible firmware options (QMK for customization, Linux for compatibility) to tailor functionality to your needs.

Powerful Dual-Core Processor: Equipped with the Xtensa 32-bit LX7 dual-core processor, this product runs at up to 240MHz, providing excellent processing power for high-performance applications. Comprehensive Connectivity: Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with a built-in antenna and the option to switch to an external antenna by resoldering an onboard resistor, ensuring versatile wireless communication. Ample Memory and Storage: Built-in 512KB Static Random-Access Memory, 384KB ROM, 16MB Flash, and 8MB P Static Random-Access Memory offer large storage capacity, making it ideal for applications that require substantial memory for data and operations. Integrated Display and Sensors: Features a 3.16-inch LCD display with a 320×820 resolution and RGB565 interface for clear visual output, plus an onboard QMI8658 6-axis IMU for motion tracking and a PCF85063 RTC chip for real-time clock functionality. Flexible Expansion & Development: Includes a TF card slot, USB Type-C port, and reserved UART, I2C, and USB headers for flexible expansion. With easy power control via a slide switch and a dedicated batt header, it is perfect for rapid prototyping and development of ESP32-S3 applications.

Tempered glass panel(hardness up to 6h). Full screen fit, good display, and dustproof Features HDMI display interface, usb type-c touch interface, with 3.5mm earphone interface, speaker interface [When used with raspberry pi] compatible with raspberry pi os, ten point touch, drive free; support ubuntu/kali/win10 iot, single touch, drive free; support for retropie, drive free [When used with jetson nano] compatible with ubuntu, single touch, drive free [When used with pc computer] compatible with windows 11/10/8.1/8/7, ten point touch, drive free

Touch panel only,only when integrated or connected to the motherboard can it be used.IPS screen,1280x800 hardware resolution; Toughened glass capacitive touch control panel, 6H hardness Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers; When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free;When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free HDMI interface for displaying, USB interface for touch control;Supports 5-level backlight adjustment Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable; BB Black: HDMI cable

High-performance MCU with RISC-V 32-bit dual-core and single-core processors; 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP SRAM, 8 KB TCM; 32MB PSRAM in the chip's package, with onboard 16MB Nor Flash; Adtaping 2*2*13 GPIO headers with 28 x programmable GPIOs Powerful image and voice processing capability. Provides image and voice processing interfaces including JPEG Codec, Pixel Processing Accelerator, Image Signal Processor, H264 encoder; Commonly used peripherals such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 TF card slot, microphone, speaker header and RTC batt header, etc. The 10.1 inch DSI LCD is only included in the ESP32-P4-NANO-KIT-D: IPS Screen, Optical Bonding Toughened Glass Panel, 800 × 1280 Resolution, With 178° Wide Viewing Angle. Supports 10-Point Touch, provides clear image and excellent visual experience Security features: Secure Boot, Flash Encryption, cryptographic accelerators, and TRNG. Additionally, hardware access protection mechanisms help to enable Access Permission Management and Privilege Separation

1. ESP32-S3-Touch-LCD-2.8 ist eine Mikrocontroller-Entwicklungsplatine, die 2,4-GHz-WLAN und BLE 5 unterstützt. Integrierter Flash und PSRAM...

Processor & Performance: Powered by an Xtensa 32-bit LX7 dual-core processor, capable of up to 240MHz, ensuring efficient processing for complex tasks. Connectivity: Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with an onboard antenna for seamless wireless communication. Memory & Storage: Comes with 512KB Static RAM, 384KB ROM, 8MB PSRAM, and 8MB Flash, providing ample storage and smooth performance for applications. Display: Onboard 7inch LCD display, 800×480 resolution, 65K color; Peripheral Interfaces & Power: Includes CAN, RS485, I2C, TF card slot, full-speed USB, and power-saving controls, with flexible clock and independent module power supply for efficient energy management.

RP2040 Mikrocontroller Kamera Entwicklungsboard mit HM01B0 Graustufenkamera und 1,14 Zoll IPS LCD Display Dieses hochleistungsfähige MCU Kamera Entwicklungsboard basiert auf dem RP2040 und ist mit einer HM01B0 Graustufenkamera sowie einem 1,14 Zoll IPS LCD Display ausgestattet. Es eignet sich hervorragend für Anwendungen wie die Erfassung von Bildinformationen. Merkmale im Überblick Basierend auf RP2040: Bietet Dual-Core ARM Cortex M0+ Prozessor für flexible Taktfrequenzen bis zu 133 MHz. Integrierte HM01B0 Graustufenkamera: Ideal für Anwendungen zur Bildinformationserfassung. 1,14 IPS LCD Display: Zeigt Bilder mit einer Auflösung von 240×135 Pixeln und 65K Farben. Technische Daten Dual-Core ARM Cortex M0+ Prozessor, bis zu 133 MHz Betriebsfrequenz 264KB SRAM und 16MB Onboard

Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 4inch capacitive touch display, 480×480 resolution, 65K color Onboard CAN, RS485, I2C interface and TF card slot, and integrates full-speed USB port Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios

Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use. Onboard 2inch LCD display for clear color picture display, 240 x 320 resolution, 262K color Built-in ST7789T3 display driver, using SPI communication, effectively saving the IO resources. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope). Onboard 3.7V MX1.25 Lithium batt recharge/discharge header Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use. Onboard TF card slot for external TF card storage of pictures or files Adapting 22 x GPIO pins for flexible configuration of pin function. Onboard camera interface, compatible with mainstream cameras such as OV2640(NOT Included) and OV5640(NOT Included) for image and video acquisition

ESP32-S3-Touch-LCD-2.1B(2.5D curved touch panel version) is a microcontroller development board with 2.4GHz WiFi and BT BLE 5 support, integrates high-capacity Flash and PStatic RAM. Onboard 2.1inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM. Adapting UART, I2C and some IO interfaces, integrates full-speed USB port Supports touch control via I2C interface, with interrupt support. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios Onboard 2.1inch capacitive touch display, 480×480 resolution, 262K color. Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and batt recharge management module, etc.

3.4inch 800x800 IPS round touch display, high-performance MCU with RISC-V 32-bit dual-core and single-core processors. 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP Static RAM, 8 KB TCM Powerful image and voice processing capability. Provides image and voice processing interfaces including JPEG Codec, Pixel Processing Accelerator, Image Signal Processor, H264 encoder 32MB PStatic RAM in the chip's package, with onboard 32MB Nor Flash. Onboard 2*20 GPIO header with 28 x remaining programmable GPIOs Commonly used peripherals such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG HS, SDIO 3.0 TF card slot, dual microphones (support echo cancellation), speaker header and RTC batt header, etc. Security features: Secure Boot, Flash Encryption, cryptographic accelerators, and TRNG. Additionally, hardware access protection mechanisms help to enable Access Permission Management and Privilege Separation

ESP32-S3-LCD-1.3(without Case & Prism Cube), a low-cost, high-performance MCU board equipped with 240MHz dual-core processor. It is compact in size, with onboard 1.3inch 262K color LCD display, Lithium batt recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RGB LCD, and Wi-Fi / BT antenna, which makes it easy for you to develop and integrate it into products quickly. Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, keeps it up to date, easier to use. Onboard 1.3inch 240x240 pixels 262K display for clear and colorful pictures Built-in ST7789V2 display driver, using SPI communication, effectively saving the IO resources. Adapting 13PIN 2.54mm GPIO header for connecting peripherals and debugging, supports flexible configuration of pin functions Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures and other applications. Onboard 3.7V MX1.25 lithium batt recharge / discharge header

Sharp High-Resolution Display: The 7-inch screen features a 1280x720 resolution with vibrant colors and a sharp, clear image, ideal for various projects. Capacitive Touch Functionality: With 10-point capacitive touch support, it offers precise and responsive touch interaction, perfect for touch-based applications. Enhanced Durability: The display is protected by a toughened glass surface with 6H hardness, providing resistance against scratches and fingerprints. Slim and Elegant Design: Featuring a compact and slim profile of just 9.3mm thickness, it integrates well with Raspberry Pi setups for a sleek and modern look. Broad Device Compatibility: Compatible with Raspberry Pi 4B, 3B+, and other devices with a DSI interface, supporting multiple operating systems such as Raspberry Pi OS and Android.

Raspberry Pi 5 is the latest generation flagship product in the Raspberry Pi series, following the success of the Raspberry Pi 4. It provides a 2-3x increase in CPU performance over the previous generation. Onboard dual CSI/DSI ports and USB connectors which are provided by the Raspberry Pi RP1 I/O controller. And this is the first Raspberry Pi computer using silicon built in-house at Raspberry Pi. 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, 512KB per-core L2 caches and a 2MB shared L3 cache. VideoCore VII GPU @800MHz, supporting OpenGL ES 3.1, Vulkan 1.2. Dual 4Kp60 HDMI display output 4Kp60 HEVC decoder. LPDDR4X-4267 SDRAM (options for 4GB/8GB). 2.4GHz/5GHz dual-band 802.11ac Wi-Fi. BT 5.0 / BT Low Energy (BLE). TF card slot, with support for high-speed SDR104 mode 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation. Gigabit Ethernet, with PoE+ support (requires separate PoE+ HAT). 2 × 4-lane MIPI DSI/CSI port. PCIe 2.0 x1 interface for fast peripherals (requires separate M.2 HAT or other adapter) 5V/5A DC power via USB-C, with Power Delivery support. Raspberry Pi standard 40-pin header. Real-time clock (RTC), powered from external batt (not included). Onboard power button for power on/off without disconnecting power adapter

Integrated LCD Screen, TF Card Slot, Boot Button and Other Peripheral interfaces Suitable For Applications Such As Wireless USB Flash Drive, USB WiFi/Bluetooth, USB Dongle Based On ESP32-S3 Adopts ESP32-S3R2 chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz Built in 512KB SRAM, 384KB ROM, 2MB of on-chip PSRAM, and onboard 16MB Flash memory Onboard 1.14inch 240×135 pixels 65K color IPS LCD display Integrated 2.4GHz WiFi and Bluetooth LE wireless communication WiFi supports Infrastructure BSS in Station, SoftAP, and Station + SoftAP modes WiFi supports 1T1R mode with data rate up to 150 Mbps Bluetooth supports high power mode (20dBm) Internal co-existence mechanism between Wi-Fi and Bluetooth to share the same antenna Onboard 3PIN UART port, 3PIN GPIO header and 4PIN I2C port Equipped with plastic case and cables Provides online open-source demo and resources, more convenient for learning and development

Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Supports passive and active digital input, with bi-directional optocoupler isolation Onboard 4.3inch capacitive touch display, 800x480 resolution, 65K color. Onboard voltage regulator, supports 7~36V wide range power supply Onboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P batt header and digital isolated IO interfaces, etc. Onboard LED indicators for indicating the power and batt recharging status Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios

Powerful ESP32-S3 Processor: Powered by the ESP32-S3R8 Xtensa 32-bit dual-core processor, offering up to 240MHz clock speed, enabling fast and efficient performance for various applications. Wireless Connectivity & Storage: Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard 512KB Static RAM, 384KB ROM, 8MB PSRAM, and 16MB Flash memory for robust connectivity and data storage. Integrated Display & Touch: Features a 3.5-inch capacitive touch IPS display with a 320×480 resolution and 262K color support, driven by ST7796 and FT6336 chips, offering clear and responsive touch interaction. Advanced Sensors & RTC: Equipped with a QMI8658 6-axis IMU (accelerometer & gyroscope) for motion detection, along with a PCF85063 RTC chip powered by a backup batt, ensuring continuous timekeeping even during batt changes. Expandable & Efficient Power Management: Includes multiple I/O options (I2C, UART, USB, GPIO), a TF card slot for expanded storage, camera interface compatibility (OV2640, OV5640), and efficient power management with the AXP2101 IC for long-lasting batt life.

Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 2.8inch LCD display, 480x640 resolution Adapting UART, I2C and some IO interfaces, integrates full-speed USB port. Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and batt recharge management module, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

A high-performance development board based on ESP32-P4 controller with RISC-V 32-bit dual-core and single-core processors. Equipped with 10.1 inch IPS touch display, features rich human-machine interfaces including MIPI-CSI (with integrated image signal processor), it also supports USB OTG 2.0 HS for high-speed communication The ESP32-P4 chip integrates the Digital Signature Peripheral and a dedicated Key Management Unit, ensuring secure data and operations. Specifically designed for high-performance and high-security applications, to meet the higher requirements of embedded applications such as Human-Machine interaction, efficient edge computing, and IO expansion High-performance MCU with RISC-V 32-bit dual-core and single-core processors. 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP Static RAM, 8KB TCM Powerful image and voice processing capability. Provides image and voice processing interfaces including JPEG Codec, Pixel Processing Accelerator, Image Signal Processor, H264 encoder 32MB PStatic RAM in the chip's package, with onboard 32MB Nor Flash. Commonly used peripherals such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO 3.0 TF card slot, dual microphones (supports echo cancellation), and speaker, etc. Security features: Secure Boot, Flash Encryption, cryptographic accelerators, and TRNG. Additionally, hardware access protection mechanisms help to enable Access Permission Management and Privilege Separation

7inch capacitive touch display screen, 800 x 480 hardware resolution. Capacitive touch type; 5- Points touch. Supports Pi 4B Supports Raspbian, 5-points touch, driver free Supports Retropie, driver free Support brightness adjustable through software control.Raspberry pi capacitive touch display dsi lcd panel toughened glass driver free brightness camera image protection case