esp32 display

Leistungsstarke LoRa-Kommunikationsleistung: Ausgestattet mit dem LoRa-Modul bietet es eine hervorragende Kommunikationsleistung über...

Dieses Entwicklungsboard basiert auf dem ESP32-S3-Chip und integriert Dual-Core-Prozessor, KI-Beschleunigungsunterstützung und einen...

KI-Funktionen: Nutzen Sie fortschrittliche KI-Funktionalitäten für innovative Anwendungen. Kompaktes Design: Der XiaoZhi -Formfaktor...

ESP32-P4-ETH Development Board: Based On ESP32-P4, with 100 Mbps RJ45 Ethernet Port, with Rich Human-machine Interfaces. Supports AI Speech Interaction: Allows access to online large model platforms such as ChatGPT, DeepSeek, Doubao, etc. Processor: High-performance MCU equipped with RISC-V 32-bit dual-core and single-core processors. Equipped with RISC-V 32-bit single-core processor (LP system). Memory: 128 KB of high-performance (HP) system read-only memory (ROM). 16 KB of low-power (LP) system read-only memory (ROM). 768 KB of high-performance (HP) L2 memory (L2MEM). 32 KB of low-power (LP) SRAM. 8 KB of system tightly coupled memory (TCM). 32 MB PSRAM is stacked in the package, and the QSPI port is connected to 32MB Nor Flash. Rich Human-Machine Interfaces: such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 TF card slot, microphone, speaker header, etc. Adapting 2*20 GPIO headers with 27 x remaining programmable GPIOs. Two Power Supply Methods: Supports both PoE and USB Type-C power supply. *PoE verison, Supports PoE Power Supply. Provides Both Network Connection And Power Supply In Only One Ethernet Cable.

[ESP32= MCU+WiFi+Bluetooth] Das Entwicklungsboard JC4832W535 basiert auf einem ESP32-S3-Controller, einer Dual-Core-CPU und einer Taktfrequenz von...

It is a high-performance, highly integrated MCU board (ESP32 With Display). Onboard 3.5inch capacitive touch IPS display, power management IC, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC, low power audio codec, and so on, which makes it easy for you to develop and integrate into the products quickly. Supports AI Speech Interaction: Allows access to online large model platforms such as DeepSeek, Doubao,ChatGPT, etc. Onboard Audio Codec: Supports high-quality audio processing, providing clear and high-quality audio input and output. Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Onboard 3.5inch capacitive touch display for clear color picture display, 320 x 480 resolution, IPS Display, 262K color. Suitable for various smart device development, enabling human-machine interaction. Built-in ST7796 display driver and FT6336 capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources. Type-C connector, improving device compatibility, easier to use.

Der Miner ist vorinstalliert und sofort einsatzbereit. Einfach per USB anschließen, mit WLAN verbinden und die Mining-Konfiguration über die Weboberfläche durchführen – kein kompliziertes Setup erforderlich. Das integrierte Display zeigt wichtige Informationen in Echtzeit wie Hashrate, Mining-Status, Netzwerk-Verbindung und andere Bitcoin-Daten direkt auf dem Gerät. Mit einem Stromverbrauch von nur etwa 1–2 Watt eignet sich der Miner perfekt für den Dauerbetrieb zu Hause oder im Büro und verursacht nur minimale Stromkosten. Kompaktes Design, leiser Betrieb und WLAN-Verbindung machen das Gerät zu einem idealen technischen Gadget für Schreibtisch, Home-Office oder Makerspaces. Perfekt auch als Lern- und Experimentierplattform für Blockchain-Technologie.

Das Board verfügt über einen 2,8-Zoll-IPS- oder TN-Farbbildschirm mit 16-Bit-RGB-65K-Farbanzeigefunktion, der atemberaubende und lebendige Farben bietet. Mit einer Auflösung von 240 x 320 liefert es scharfe und klare Bilder. ESP32-DOWDQ6-Controller, Dual-Core-CPU, Taktfrequenz bis zu 240 MHz Hochgeschwindigkeits-SDIO, SPI, UART und andere Funktionen, unterstützt den automatischen Download. Geeignet für APP-Fernsteuerung, Fernerfassung von Umweltdaten, Ferndatenfusion, Fernparametereinstellungen und andere LoT-Entwicklungsanwendungen.

Einführung des Mainboards -2424S012 = MCU + WiFi + Bluetooth Das -2424S012-Entwicklungsboard basiert auf dem -C3-Controller des Unternehmens. Dual-Core-CPU, Taktfrequenz zu 160 MHz,. Integriert eine Fülle von Ressourcen-Peripheriegeräten, Hochgeschwindigkeits-SDIO, SPI, UART und andere Funktionen. unterstützt automatischen Download. Der Bildschirm ist vollständig verklebt, gutes Display und staubdicht.

High-Performance ESP32-S3 Processor-- Equipped with a dual-core Xtensa LX7 CPU with a clock speed of up to 240MHz, built-in 512KB SRAM, 384KB ROM, stacked 8MB PSRAM and external 16MB Flash, supports 2.4GHz Wi-Fi and Bluetooth 5 (LE), easily handling complex applications and AI calculations. 1.54inch IPS LCD Display-- Onboard 1.54inch LCD display for clear color picture display, 240 × 240 resolution, 262K color. It perfectly presents rich visual content such as AI dialogue, electronic photo album, video playback, and game animation. Intelligent AI Voice Interaction-- Supports mainstream online large model platforms such as Xiaozhi AI and DeepSeek. It features an onboard dual microphone array and ES7210/ES8311 audio codec chip, providing voice wake-up, conversation interruption, noise reduction, and echo cancellation functions for a smooth and intelligent dialogue experience. Multifunctional Sensors and Expansion-- Integrated six-axis inertial measurement unit (3-axis accelerometer + 3-axis gyroscope) to support motion detection; onboard Micro SD card slot for storage expansion; Type-C interface for convenient power supply and data transmission; additional I2C and UART pads for peripheral connections. Secondary Development-- The factory firmware includes built-in AI dialogue, audio and video playback, electronic photo album, text reading, and fun games. It can be used directly as a smart chat toy, or developers can perform personalized programming and in-depth customization.

Equipped with a high-performance 32-bit RISC-V processor with clock speed up to 160 MHz, and a low-power 32-bit RISC-V processor with clock speed up to 20MHz. Built-in 320KB ROM, 512KB HP S-R-A-M, 16KB LP S-R-A-M and 16MB Flash memory ESP32-C6 1.69inch touch Display development board integrated WiFi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, more powerful wireless connectivity Onboard ES8311 audio codec chip, microphone, and speaker for AI interaction, allows access to online large model platforms. ESP32-C6 mcu board onboard 1.69inch capacitive touch LCD display for clear color picture display, 240 × 280 resolution, 262K color IPS touchscreen, suitable for various scenarios. Embedded with ST7789V2 display driver and CST816T capacitive touch chip Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc. Onboard PCF85063 RTC chip for RTC function requirement

Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use. Onboard 2inch capacitive touch display for clear color picture display, 240 x 320 resolution, 262K color Built-in ST7789T3 display driver and CST816D capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope).Onboard 3.7V MX1.25 Lithium batt recharge/discharge header. Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use Onboard TF card slot for external TF card storage of pictures or files. Adapting 22 x GPIO pins for flexible configuration of pin function. Onboard camera interface, compatible with mainstream cameras such as OV2640(NOT Included) and OV5640(NOT Included) for image and video acquisition

Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (BLE), with onboard antenna Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory. Type-C connector, keeps it up to date, easier to use Onboard 1.28inch LCD display, round IPS panel, 240×240 resolution, 65K color.Adopts CNC metal case with Acrylic dull-polish bottom plate. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture. Onboard 3.7V lithium battery recharge/discharge header and GPIO headers Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios.Integrated with USB serial port full-speed controller, GPIO pins allow flexibly configuring pin functions

240x284 Pixel Auflösung, 262.000 Farben, geeignet zur klaren Darstellung von Farbbildern. Hohe Lichtdurchlässigkeit des Touchscreens,

Equipped with 32-bit LX7 dual-core processor, up to 240MHz main frequency.Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory.Type-C connector, keeps it up to date, easier to use Onboard 1.28inch capacitive touch display, 240×240 resolution, 65K color.Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture. Onboard 3.7V lithium battery recharge/discharge header and 6 × GPIO pins via SH1.0 connector. Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios.Integrated with USB serial port full-speed controller, GPIO pins allows flexibly configuring pin functions

🖥️ High-Resolution 1.47” IPS Touch Display: Built-in 172×320 color LCD with capacitive touch input, ideal for smooth GUI rendering using LVGL in smart displays or embedded HMI devices. ⚡ Dual-Core RISC-V Architecture for AIoT: Equipped with powerful 160MHz main core and 20MHz low-power core, offering flexibility in balancing performance and energy efficiency. 📶 Next-Gen Wireless: Wi-Fi 6 + BLE 5.0: Supports 2.4GHz Wi-Fi 6 (802.11 ax/b/g/n) and Bluetooth 5 with Mesh, enabling fast and stable wireless connection for cloud-based IoT applications. 💾 External Storage Support with TF Card Slot: Integrates 8MB flash and a microSD (TF) card slot for GUI assets, logs, firmware updates, or user data expansion in portable systems. 🔌 USB + GPIO Expansion for Rapid Development: Onboard USB interface and GPIO header support full-speed peripheral access and prototyping, compatible with sensors, actuators, and I/O devices.

Ausgestattet mit einem 262K-Farbdisplay mit einer Auflösung von 320 x 480 bietet es hervorragende visuelle Effekte. Der Touchscreen hat eine...

WIFI- und -Modul: Das 3D-Drucker-Motherboard verwendet das ESP32 ROOM 32U-Modul, einen eingebetteten Dual--32-Bit-Hochgeschwindigkeits-MCU, einen Takt von bis zu 240 MHz und ein integriertes WIFI- und -Modul. Die Leistung ist sehr leistungsstark. Angepasste Firmware: Dies ist eine 3D-Drucker-Hauptsteuerplatine mit integriertem ESP32-WLAN, unterstützt die Marlin2.0-Firmware, unterstützt MKS MINI12864V3 zusätzlich zum üblichen LCD2004,12864-Bildschirm. Unterstützt seriellen Bildschirm: Die Steuerplatine des 3D-Druckers unterstützt den seriellen MKS-TFT-Bildschirm. Es kann die Firmware über USB aktualisieren, eine Verbindung zu WLAN und einer Webseite herstellen, um den Druck zu steuern. Speicherchip: Darüber hinaus verfügt das Modul über einen integrierten 8-MByte-Flash-Speicherchip, der einen wirksamen Schutz für weitere Anwendungsszenarien bietet. Anwendbare Modelle: Unser ESP32 WIFI 3D-Drucker-Motherboard für MKS TinyBee MINI12864 ist ein gutes Ersatzteil für alte und defekte Teile.

1. ESP32-S3 Dual-Core-Prozessor (240 MHz) mit umfangreichen Entwicklungsressourcen. 2. Integriertes 3,5-Zoll-IPS-Farbdisplay (320x480) mit...

1. ESP32-S3 Dual-Core-Prozessor (240 MHz) mit umfangreichen Entwicklungsressourcen. 2. Integriertes 3,5-Zoll-IPS-Farbdisplay (320x480) mit...

Dieser innovative KI-Chatbot, basierend auf dem ESP32-Chip, bietet intelligente Sprachinteraktion und personalisierte Anpassungsmöglichkeiten.

ESP32-C5-LCD-1.47 development board equipped with a high-performance 32-bit RISC-V processor with clock speed up to 240MHz, and a low-power 32-bit RISC-V processor with clock speed up to 48MHz. Integrated Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread 1.4) wireless communication Onboard 1.47inch LCD display can smoothly run GUI programs such as LVGL, 172 × 320 resolution, 262K color. Built-in RGB LED with clear acrylic sandwich panel for cool lighting effect Built-in 320KB ROM, 384KB HP Static RAM, 16KB LP Static RAM and 4MB Flash memory. Onboard TF card slot for external TF card storage of pictures or files Onboard USB-C port supporting native ESP32-C5 USB download, debugging, and serial communication, depending on firmware configuration.Adapting multiple GPIO pins Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

✅ ESP32-S3 Development Board with LCD Display: Features a 3.16 inch LCD screen (320x820) with 262K color and RGB565 interface, ideal for GUI development using ESP32-S3 with LVGL or HMI projects. 📡 WiFi and Bluetooth 5 for IoT Connectivity: This ESP32-S3 board supports 2.4GHz WiFi and Bluetooth 5 (LE/Mesh), making it perfect for wireless IoT and edge computing applications. ⚡ High-Performance Dual-Core Processor, 240MHz: Powered by Xtensa 32-bit LX7 dual-core CPU, running up to 240MHz, the board handles AI computing, gesture detection, and real-time interaction smoothly. 🧭 Onboard IMU Sensor and RTC Chip for Sensing & Timing: Includes QMI8658 6-axis IMU (accelerometer + gyroscope) and PCF85063 RTC, perfect for projects needing motion detection, step tracking, or timekeeping. 🔌 Rich Expansion Ports for Developers: Comes with USB Type-C, UART, I2C, TF card slot, battery headers, and programmable buttons—this ESP32-S3 LCD dev board is made for rapid prototyping and expansion.

Konzipiert für 1,02-Zoll-SPI-Schnittstellen-EPD mit einer Typ-C-Stromschnittstelle. Ausgestattet mit einem USB-Seriell-Anschluss und einer...

1. Das aktualisierte Modell verfügt über einen integrierten SX1262 + ESP32-Chip und unterstützt vollständig das...

Das NM-CYD-C5 stellt eine bedeutende Weiterentwicklung des beliebten Cheap Yellow Display (CYD)-ökosystems dar. Es behält den...

Dieses Produkt verfügt über einen integrierten 1,54-Zoll-LCD-Bildschirm, einen Sechs-Achsen-Sensor, ein Dual-Mikrofon-Array und einen...

Onboard voltage translator, compatible with 3.3V / 5V MCUs. Blue Display Color Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate Provide with online development resources (examples for Raspberry Pi/STM32/ESP32/Jetson Nano). Please contact our customer service for examples

ESP32-S3 1.85inch round LCD display development board, equipped with high-performance 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built-in 512KB Static Random-Access Memory and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM ESP32-S3 microcontroller development board with onboard 1.85inch round LCD, 360×360 resolution 262K color IPS display panel, wide viewing angle Supports the expansion of multiple peripherals via GPIO and I2C interfaces, etc. Onboard audio decoder, supports high-quality audio processing, providing clear and high-quality audio input and output. Supports Offline Speech recognition and AI Speech Interaction, allows access to online large model platforms to support more AI application scenarios Onboard Microphone, QMI8658 6-axis sensor, RTC sensor, TF card slot, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

Dieses Produkt verfügt über einen integrierten 1,54-Zoll-LCD-Bildschirm, einen Sechs-Achsen-Sensor, ein Dual-Mikrofon-Array und einen...