waveshare esp32 s3

The ESP32-S3-Touch-AMOLED-1.75(Standard version) is a high-performance, highly integrated MCU board designed by Waveshare. It is compact in size, onboard 1.75inch AMOLED capacitive touch display, power management IC, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC chip, low power audio codec, echo cancellation circuit, and so on, which makes it easy for you to develop and integrate into the products quickly Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use. Onboard PWR and BOOT programmable buttons for easy custom function development Onboard 1.75inch AMOLED capacitive touch display for clear color picture display, 466x466 resolution, 16.7M color. Built-in CO5300 display driver and CST9217 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Equipped with dual digital microphones array for audio algorithms such as noise reduction and echo cancellation, suitable for accurate speech recognition and near-field / far-field voice wake-up applications Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by Li batt(NOT Included) through AXP2101 chip for uninterrupted power supply. Onboard 3.7V MX1.25 Li batt recharge/discharge header. Onboard 8PIN 2.54mm header adapting 3xGPIO and 1xUART, and reserved pads of I2C and 3xexpanded IO interfaces, for connecting peripherals and debugging Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design. Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, batt charging, batt management, and batt life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc

The ESP32-S3-Touch-LCD-4.3C(Standard version, without case) integrates a 4.3inch capacitive touch display and an audio module, supporting AI speech interaction and the LVGL graphical interface. Combining display, touch, and voice in one device, it enables easy development of intelligent human-machine interaction terminals Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM Onboard 4.3inch capacitive touch display, 800 x 480 resolution, 65K color. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Onboard ES8311 audio codec chip and ES7210 echo cancellation circuit. Onboard voltage regulator, supports 7 ~ 36V wide range power supply Onboard RTC chip and Batt holder to ensure time data is not lost during power loss when Batt is installed. Onboard I2C interface, TF card slot, MX1.25 2PIN Batt header, and digital isolated IO interfaces, etc. Supports passive and active digital input with bi-directional optocoupler isolation, and the active digital input supports positive and negative voltages Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current. Onboard LED indicators for indicating the power and Batt recharging status. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios

The ESP32-S3-Touch-AMOLED-1.75-B(Standard version with protective case) is a high-performance, highly integrated MCU board designed by Waveshare. It is compact in size, onboard 1.75inch AMOLED capacitive touch display, power management IC, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC chip, low power audio codec, echo cancellation circuit, and so on, which makes it easy for you to develop and integrate into the products quickly Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use. Onboard PWR and BOOT programmable buttons for easy custom function development Onboard 1.75inch AMOLED capacitive touch display for clear color picture display, 466x466 resolution, 16.7M color. Built-in CO5300 display driver and CST9217 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Equipped with dual digital microphones array for audio algorithms such as noise reduction and echo cancellation, suitable for accurate speech recognition and near-field / far-field voice wake-up applications Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by Li batt(NOT Included) through AXP2101 chip for uninterrupted power supply. Onboard 3.7V MX1.25 Li batt recharge/discharge header. Onboard 8PIN 2.54mm header adapting 3xGPIO and 1xUART, and reserved pads of I2C and 3xexpanded IO interfaces, for connecting peripherals and debugging Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design. Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, batt charging, batt management, and batt life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc

ESP32-S3-Touch-LCD-2.1B(2.5D curved touch panel version) is a microcontroller development board with 2.4GHz WiFi and BT BLE 5 support, integrates high-capacity Flash and PStatic RAM. Onboard 2.1inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM. Adapting UART, I2C and some IO interfaces, integrates full-speed USB port Supports touch control via I2C interface, with interrupt support. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios Onboard 2.1inch capacitive touch display, 480×480 resolution, 262K color. Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and batt recharge management module, etc.

Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with an onboard antenna. Supports switching to use external antenna via resoldering an onboard resistor. With CNC metal case, with clear and colorful label on the back, nice looking and easy to carry Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Supports capacitive touch function controlled via I2C interface, with interrupt support. Onboard TF card slot for external TF card storage of pictures or files Onboard 1.43inch AMOLED display, QSPI interface, 466 x 466 resolution, 16.7M color. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc. Onboard PCF85063 RTC chip with reserved SH1.0 RTC batt header (supports charging) for RTC function requirement. Onboard RST button and programmable BOOT button for easy custom function development. Onboard 3.7V MX1.25 Lithium batt recharge/discharge header Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use. Onboard UART and I2C SH1.0 4PIN connector, reserved 2 x 14PIN 1.27mm pitch headers, adapting multiple GPIO interfaces.

Powerful ESP32-S3 Processor: Powered by the ESP32-S3R8 Xtensa 32-bit dual-core processor, offering up to 240MHz clock speed, enabling fast and efficient performance for various applications. Wireless Connectivity & Storage: Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard 512KB Static RAM, 384KB ROM, 8MB PSRAM, and 16MB Flash memory for robust connectivity and data storage. Integrated Display & Touch: Features a 3.5-inch capacitive touch IPS display with a 320×480 resolution and 262K color support, driven by ST7796 and FT6336 chips, offering clear and responsive touch interaction. Advanced Sensors & RTC: Equipped with a QMI8658 6-axis IMU (accelerometer & gyroscope) for motion detection, along with a PCF85063 RTC chip powered by a backup batt, ensuring continuous timekeeping even during batt changes. Expandable & Efficient Power Management: Includes multiple I/O options (I2C, UART, USB, GPIO), a TF card slot for expanded storage, camera interface compatibility (OV2640, OV5640), and efficient power management with the AXP2101 IC for long-lasting batt life. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.

ESP32-S3-Zero Entwicklungsboard Basierend auf dem ESP32-S3FH4R2 Dual-Core-Prozessor bietet dieses Entwicklungsboard eine Lauffrequenz von 240MHz und unterstützt 2,4 GHz Wi-Fi und Bluetooth 5. Das ESP32-S3-Zero Development Board verfügt über multifunktionale GPIO-Pins und eignet sich dank seiner gestanzten Modulstruktur besonders für SMD-Anwendungen. Aufgrund seiner abgesetzten Löcher ist es klein und leicht in andere Host-Boards zu integrieren. Das ESP32-S3-Zero verfügt über einen integrierten Type-C USB-Anschluss, bietet viele unbenutzte Pins in einer kleinen Bauform und verwendet den ESP32-FH4R2 als System-Chip (SoC). Merkmale im Überblick Ausgestattet mit dem Xtensa 32-bit LX7 Dual-Core-Prozessor mit bis zu 240MHz HauptfrequenzUnterstützt 2,4 GHz Wi-Fi (802.11 b/g/n) und Bluetooth® 5 (LE)Integrierter 512KB SRAM und 384KB ROM, an Bord 4MB Flash-Speicher und 2MB PSRAMGestanztes Modul und integrierte Keramikantenne ermöglichen direktes Löten auf TrägerplatinenUnterstützt flexible Taktgebung, unabhängige Modulstromversorgungsei

The ESP32-S3-LCD-1.47B features a high-performance Xtensa 32-bit LX7 dual-core processor, running at up to 240MHz, ideal for advanced HMI applications. It supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) with an onboard antenna, ensuring reliable wireless connectivity. The board is equipped with 512KB SRAM, 384KB ROM, 16MB Flash, and 8MB PSRAM, providing sufficient storage for efficient operation and program execution. It includes a 1.47-inch LCD display with 172×320 resolution and 262K colors, alongside a 6-axis IMU for motion sensing and gesture detection. The ESP32-S3-LCD-1.47B features multiple I/O interfaces, a TF card slot for external storage, a batt charging module, and low-power modes for versatile and efficient use in various scenarios. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

Supports touch control via I2C interface, with interrupt support. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 2.8inch LCD display, 480x640 resolution Adapting UART, I2C and some IO interfaces, integrates full-speed USB port. Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and batt recharge management module, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 2.8inch LCD display, 480x640 resolution Adapting UART, I2C and some IO interfaces, integrates full-speed USB port. Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and batt recharge management module, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

The ESP32-S3-Touch-AMOLED-1.75-G(GPS version, with built-in LC76G module, comes with a GNSS ceramic antenna) is a high-performance, highly integrated MCU board designed by Waveshare. It is compact in size, onboard 1.75inch AMOLED capacitive touch display, power management IC, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC chip, low power audio codec, echo cancellation circuit, and so on, which makes it easy for you to develop and integrate into the products quickly Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use. Onboard PWR and BOOT programmable buttons for easy custom function development Onboard 1.75inch AMOLED capacitive touch display for clear color picture display, 466x466 resolution, 16.7M color. Built-in CO5300 display driver and CST9217 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Equipped with dual digital microphones array for audio algorithms such as noise reduction and echo cancellation, suitable for accurate speech recognition and near-field / far-field voice wake-up applications Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by Li batt(NOT Included) through AXP2101 chip for uninterrupted power supply. Onboard 3.7V MX1.25 Li batt recharge/discharge header. Onboard 8PIN 2.54mm header adapting 3xGPIO and 1xUART, and reserved pads of I2C and 3xexpanded IO interfaces, for connecting peripherals and debugging Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design. Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, batt charging, batt management, and batt life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc

Important: This product requires a 3.7V Lithium batt (not included). Please purchase it separately to ensure proper operation. Powerful Dual-Core Processor: Equipped with the ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, running at up to 240MHz, providing excellent processing power for demanding applications. Comprehensive Wireless Connectivity: Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Blue-T 5 (LE), offering seamless connectivity for a wide range of IoT and wireless projects, with an onboard antenna for enhanced signal strength. Advanced Display & Touch Interface: Features a 1.83-inch capacitive touch display with a 240 × 284 resolution and 65K colors. The onboard ST7789P display driver and CST816D touch chip utilize SPI and I2C communication, conserving I/O resources while delivering high-quality display and touch interaction. Multi-Functional Sensors & Power Management: Includes an onboard QMI8658 6-axis IMU for motion detection and gesture recognition, along with a PCF85063 RTC chip and AXP2101 for uninterrupted power supply, efficient power management, and batt charging. The AXP2101 IC also supports multiple configurable output voltages, enhancing energy efficiency.

The ESP32-S3-Touch-AMOLED-1.75C-EN(without Batt) is a high-performance, highly integrated MCU board designed by Waveshare. It features a CNC-machined aluminum alloy case, offering a compact and premium appearance. Onboard 1.75inch AMOLED capacitive touch display, highly integrated power management chip, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC chip, low power audio codec, echo cancellation circuit, and so on Built-in speaker and with reserved space for Li Batt, providing powerful support for rapid development and product prototype validation. Equipped with high-performance ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built-in 512KB Static RAM and 384KB ROM, with onboard 8MB PStatic RAM and an external 32MB Flash memory Type-C port, improving device compatibility, easier to use. Onboard 1.75inch AMOLED capacitive touch display for clear color picture display, 466 x 466 resolution, 16.7M color. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc Built-in CO5300 display driver and CST9217 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Equipped with a dual-microphone array, enabling audio algorithms such as noise reduction and echo cancellation, suitable for accurate voice recognition and near-field / far-field voice wake-up applications Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PWR and BOOT programmable buttons for easy custom function development. Onboard 3.7V MX1.25 Li Batt recharge/discharge header. Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, Batt charging, Batt management, and Batt life optimization, etc

The ESP32-S3-LCD-1.47B features a high-performance Xtensa 32-bit LX7 dual-core processor, running at up to 240MHz, ideal for advanced HMI applications. It supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) with an onboard antenna, ensuring reliable wireless connectivity. The board is equipped with 512KB SRAM, 384KB ROM, 16MB Flash, and 8MB PSRAM, providing sufficient storage for efficient operation and program execution. It includes a 1.47-inch LCD display with 172×320 resolution and 262K colors, alongside a 6-axis IMU for motion sensing and gesture detection. The ESP32-S3-LCD-1.47B features multiple I/O interfaces, a TF card slot for external storage, a batt charging module, and low-power modes for versatile and efficient use in various scenarios. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

【ESP32-S3 1.85″ LCD Development Board】Integrates QSPI interface display, multiple peripheral interfaces 【IPS Display Panel】262K color, 360×360 resolution, wide viewing angle 【Supports multiple peripherals】Supports the expansion of multiple peripherals via GPIO and I2C interfaces, etc. 【Display control chip】Display: ST77916 【Capacitive touch】Optional for capacitive touch function controled via I2C interface for flexible operation and smooth UI interaction, with interrupt support

Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Onboard dual 1.28inch LCD displays, 240x240 resolution, 65K color, without touch function Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built-in 512KB Static RAM and 384KB ROM, with onboard 8MB PStatic RAM and 16MB Flash Onboard ES8311 audio codec and ES7210 audio ADC chip, equipped with standard microphone and speaker header, supports AI speech interaction Onboard TF card slot for convenient local storage expansion, and supports the storing and reading of data, images, audio files, and more Onboard Li batt recharge management module, reserved 3.7V Li batt power supply header. Onboard SH1.0 14PIN connector, adapting UART, I2C and some IO interfaces, for easy DIY customization

Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BLE 5 (LE), with onboard antenna. Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Rich WiKi Resources: We provide official Wiki resources, please contact us for more information. Onboard Type-C port, more convenient, better device compatibility. Onboard 1.46inch LCD display, 412×412 resolution, 16.7M color. Supports touch function controlled via I2C interface, with interrupt support Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc.. Onboard PCF85063 RTC chip with reserved RTC batt header (supports charging) for RTC function requirement. Onboard programmable PWM and BOOT buttons for easy custom function development Onboard 3.7V MX1.25 lithium batt recharge/discharge header. Onboard TF card slot for extended storage and fast data transfer, flexible for data recording and media playback, simplifying circuit design Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios. Adapting multiple GPIO pins which can be mapped to various function interfaces, making it convenient for customers to customize and develop

Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (BLE), with onboard antenna Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory. Onboard 3.7V lithium batt recharge/discharge header and 6 脳 GPIO pins via SH1.0 connector Type-C connector, keeps it up to date, easier to use. Onboard 1.28inch capacitive touch display, 240x240 resolution, 65K color Adopts CNC metal case with Acrylic dull-polish bottom plate. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios. Integrated with USB serial port full-speed controller, GPIO pins allows flexibly configuring pin functions

High-Performance Processor: Powered by the Xtensa 32-bit LX7 dual-core processor, running up to 240MHz for efficient and smooth processing in embedded applications. Dual Connectivity Support: Offers 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with an onboard antenna, ensuring robust wireless communication. Generous Memory Capacity: Equipped with 512KB SRAM, 384KB ROM, 16MB Flash, and 8MB PSRAM for fast data access and storage for advanced projects. High-Resolution Touch Display: Features a 4-inch LCD screen with 480 × 480 resolution, offering 65K colors and 5-point capacitive touch control via an I2C interface. Energy-Efficient Design: Supports low-power operation with features like flexible clock and independent module power control for energy-conscious development in various applications. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BLE 5 (LE), with onboard antenna. Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Rich WiKi Resources: We provide official Wiki resources, please contact us for more information. Onboard Type-C port, more convenient, better device compatibility. Onboard 1.46inch LCD display, 412×412 resolution, 16.7M color. Supports touch function controlled via I2C interface, with interrupt support Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc.. Onboard PCF85063 RTC chip with reserved RTC batt header (supports charging) for RTC function requirement. Onboard programmable PWM and BOOT buttons for easy custom function development Onboard 3.7V MX1.25 lithium batt recharge/discharge header. Onboard TF card slot for extended storage and fast data transfer, flexible for data recording and media playback, simplifying circuit design Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios. Adapting multiple GPIO pins which can be mapped to various function interfaces, making it convenient for customers to customize and develop

The ESP32-S3-LCD-1.47B features a high-performance Xtensa 32-bit LX7 dual-core processor, running at up to 240MHz, ideal for advanced HMI applications. It supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) with an onboard antenna, ensuring reliable wireless connectivity. The board is equipped with 512KB SRAM, 384KB ROM, 16MB Flash, and 8MB PSRAM, providing sufficient storage for efficient operation and program execution. It includes a 1.47-inch LCD display with 172×320 resolution and 262K colors, alongside a 6-axis IMU for motion sensing and gesture detection. The ESP32-S3-LCD-1.47B features multiple I/O interfaces, a TF card slot for external storage, a batt charging module, and low-power modes for versatile and efficient use in various scenarios. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

ESP32-S3-DEV-KIT-N16R8 development board adopts ESP32-S3-WROOM-1 series module with 32-bit LX7 dual-core processor, capable of running at 240 MH. Integrated 512KB Static Random-Access Memory, 384KB ROM, 8MB PSRAM, 16MB FLASH memory ESP32-S3 Microcontroller 2.4GHz Wi-Fi Development Board integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication Type-C connector, easier to use. Onboard CH343 and CH334 chips can meet the needs of USB and UART development via a Type-C interface Rich peripheral interfaces, compatible with the pinout of ESP32-S3-DevKitC-1 development board, offers strong compatibility and expandability Supports ESP-IDF, Arduino, MicroPython, can easily and quickly get started and apply it to the product

Equipped with Xtensa庐 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (BLE), with onboard antenna. Type-C connector, keeps it up to date, easier to use Onboard 1.28inch LCD display, round IPS panel, 240x240 resolution, 65K color. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture. Onboard 3.7V lithium batt recharge/discharge header and GPIO headers Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios Integrated with USB serial port full-speed controller, GPIO pins allow flexibly configuring pin functions

There are several options for this item, this option comes with a PoE module. For more package content details, please check the image 2 Adopts ESP32-S3R8 high-performance chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM and 16MB Flash memory. Integrated 2.4GHz Wi-Fi and Bluetooth 5 (LE) wireless communication, with an onboard antenna. Supports switching to use external antenna Onboard W5500 Ethernet chip for extending 10/100Mbps network port through SPI interface. Optional for PoE module to realize Power over Ethernet function (IEEE 802.3af-compliant) Onboard camera interface, compatible with OV2640, OV5640 and other mainstream cameras for image and video capture. Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use Onboard TF card slot for external TF card storage of pictures or files. Compatible with Pico header, onboard multiple peripheral interfaces, offering strong compatibility and expandability Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

ESP32-S3-Touch-LCD-4.3 is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 4.3inch capacitive touch screen can smoothly run GUI programs such as LVGL Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 BLE, with onboard antenna Built in 512KB of Static RAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash. Onboard 4.3inch capacitive touch display, 800×480 resolution, 65K color. Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios

There are several options for this item, this option is with touch function, but without header Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with an onboard antenna. Supports switching to use external antenna via resoldering an onboard resistor Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 1.91inch AMOLED display, 240 × 536 resolution, 16.7M color Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc. Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use Onboard 3.7V MX1.25 lithium batt recharge/discharge header. Onboard TF card slot for external TF card storage of pictures or files

There are several options for this item, this option is board only. For more package content details, please check the image 2 Adopts ESP32-S3R8 high-performance chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM and 16MB Flash memory. Integrated 2.4GHz Wi-Fi and Bluetooth 5 (LE) wireless communication, with an onboard antenna. Supports switching to use external antenna Onboard W5500 Ethernet chip for extending 10/100Mbps network port through SPI interface. Optional for PoE module to realize Power over Ethernet function (IEEE 802.3af-compliant) Onboard camera interface, compatible with OV2640, OV5640 and other mainstream cameras for image and video capture. Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use Onboard TF card slot for external TF card storage of pictures or files. Compatible with Pico header, onboard multiple peripheral interfaces, offering strong compatibility and expandability Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

ESP32-S3 Development Board onboard 7-inch capacitive touch screen, 800x480 resolution, 65K colors. Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.Built-in 512KB SRAM and 384KB ROM, with onboard 8MB Flash and 8MB PSRAM. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna.Support capacitive touch control via I2C interface, 5-point touch with interrupt support. Onboard CAN, RS485, I2C interface, Micro SD card slot and so on, integrates full-speed USB serial port. Support flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios.

Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BlE 5 (LE), with onboard antenna Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PS-RAM Onboard 1.47inch LCD display, 172×320 resolution, 262K color Adapting multiple IO interfaces, integrates full-speed USB port Onboard TF card slot for external TF card storage of pictures or files Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios Built-in RGB LED with clear acrylic sandwich panel for cool lighting effects

There are several options for this item, this option is with pre-solder header, but without touch function Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with an onboard antenna. Supports switching to use external antenna via resoldering an onboard resistor Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 1.91inch AMOLED display, 240 × 536 resolution, 16.7M color Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc. Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use Onboard 3.7V MX1.25 lithium batt recharge/discharge header. Onboard TF card slot for external TF card storage of pictures or files