resource ultra

This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs

This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc. Onboard voltage translator, for 3.3V/5V MCUs. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32).

Ultra-narrow bezel, conpact size, with onboard voltage translator Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate Comes with online development resources (examples for Raspberry Pi/Raspberry Pi Pico/Arduino/STM32/ESP32/Jetson Nano) DISPLAY COLOR: yellow DISPLAY SIZE: 55.01 × 27.49mm COMMUNICATION INTERFACE :4-wire SPI (default) / I2C

Adopts advanced direct drive technology, removes the reducer in the traditional drive solution. Say goodbye to the shortcomings of expensive, noisy, inefficient and bulky Based on the integrated development concept, DDSM400 is a high-reliability Permanent Magnet Synchronous Motor (PMSM) integrating outer rotor brushless motor, encoder and servo Ultra low noise High precision and zero-backlash Fast response, direct drive without delay Integrated motor and driver, compact structure and high integration Supports LIN bus communication Supports obtaining motor feedback information through communication such as position, speed, current, error code, etc. With Hall position detection, over-current protection, etc. Supports electric brake No drive mechanical friction, drive efficiency close to 99.99% Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

【Pi 40PIN GPIO header】Standard Pi 40PIN GPIO extension header, fits Raspberry Pi series boards, and Jetson Nano 【No backlight】800x480, 7.5 inch e-Paper Display for Raspberry Pi no backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing 【SPI interface】7.5 inch E-Ink HAT, SPI interface, for connecting with other controller boards like RPi/Arduino/Nucleo, etc. 【Voltage translator】7.5 inch e-paper touchscreen, onboard voltage translator, compatible with 3.3V/5V MCUs 【Application examples】Waveshare 800x480, 7.5inch e-ink display suitable for price Tags, asset/equipment Tags, shelf labels, conference name tags... 【Development resources and manual】Waveshare 800x480, 7.5inch e-ink display black/white comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

This is a tri-olor e-paper Display HAT Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+, Jetson Nano,Arduino No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Onboard ESP32, supports Arduino development; Provides Android APP, allows to refresh display content via Bluetooth EDR Supports Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image; supports popular image formats: BMP, JPEG, GIF, PNG, etc Development Resources: www.waveshare.com/wiki/7.5inch_e-Paper_HAT_(B); www.waveshare.com/wiki/e-Paper_ESP32_Driver_Board

2.9inch capacitive touch ePaper module, 296×128 resolution. 5-points touch support, user-defined wakeup gesture. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Reversed control interface, for connecting with controller boards like STM32, etc. Comes with development resources and manual (examples for Raspberry Pi).

This is a Tri-color 2.9inch E-Ink display Module for Raspberry Pi/Arduino/Nucleo//Jetson Nano/STM32 No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Onboard voltage translator, compatible with 3.3V/5V MCUs

No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI control interface, for working with host boards such as Raspberry Pi/Jetson Nano/Arduino/Nucleo Onboard voltage translator, compatible with 3.3V/5V MCUs Resource download: www.waveshare.com/wiki/1.02inch_e-Paper_Module

Embedded sh1107 driver chip Ultra-narrow bezel, conpact size, with onboard voltage translator Adopts 4-wire spi and i2c interfaces, better compatibility, fast data rate Provide online development resources (examples for raspberry pi/arduino/stm32). Please contact our 24-hour customer service through ‘buyer/seller message’ to obtain relevant manuals

1.5 inch OLED module for Raspberry Pi, ultra-narrow bezel, conpact size, with onboard voltage translator 1.5 inch OLED module for Arduino, adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate For Raspberry Pi 1.5 inch OLED dispaly, comes with online development resources (examples for Raspberry Pi/Arduino/STM32)

Ultra-narrow bezel, conpact size, with onboard voltage translator Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate Comes with online development resources (examples for Raspberry Pi/Raspberry Pi Pico/Arduino/STM32/ESP32/Jetson Nano) DISPLAY COLOR: white DISPLAY SIZE: 55.01 × 27.49mm COMMUNICATION INTERFACE :4-wire SPI (default) / I2C

4.2inch E-Paper Module, With e-Paper Driver Board No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/STM32) e-Paper driver board: Adapting SPI interface for connecting with controller boards like Raspberry Pi/Jetson Nano/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs

This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Onboard voltage translator, compatible with 3.3V/5V MCUs Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. No backlight, keeps displaying last content for a long time even when power down ; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Ultra low power consumption, basically power is only required for refreshing;SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.

5.79inch e-Paper Module (G) - with driver board. Onboard voltage translator, compatible with 3.3V / 5V MCUs No backlight, keeps displaying last content for a long time even when power down. Adapting SPI interface for Raspberry Pi/Jetson Series/STM32 controller boards Ultra low power consumption, basically power is only required for refreshing Can provide with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Series/STM32) Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs Comes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

This is a TOF-based (time of flight) laser ranging sensor with embedded MCU and ranging algorithm, which is capable of offering up to 25m / 50m measuring range, and ±3cm accuracy. It supports UART or I2C communication bus, features longer measuring distance and higher light interference tolerance capability due to its ultra narrow FOV, suitable for either indoor or outdoor condition. And its ambient light tolerance is up to 100K LUX. This sensor can be widely used in applications like common distance measuring, robot obstacle avoidance / route planning / ceiling detection, and more... long range low cost ranging module high stability, high accuracy, high sensitivity ranging; UART / I2C / IO communication support UART mode: supports active query output I2C mode: up to 8x cascades I/O mode: unable to output distance parameter Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Ultra low power consumption, basically power is only required for refreshing Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32) No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32) Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.

[Android 15 System] - The T2 Ultra Rugged Tablet runs on Android 15, optimized for enhanced background app performance and reduced system resource usage. Apps launch faster, with camera hot-start speeds improved by 4.48% on average and cold-start speeds by 6.60%, ensuring smooth, lag-free operation [64MP + 32MP Camera] - Our outdoor tablet features ultra-high-resolution cameras: a 64MP rear camera for crisp, detailed photography and a 32MP front camera for high-definition video calls. It also includes a 20MP Sony night vision camera for superior low-light performance. [IP68 & MIL-STD-810H | 20,000mAh Battery] - The T2 Ultra Industrial Tablet delivers exceptional durability with IP68 dust/water resistance, allowing extended use in harsh environments. It survives immersion in 1 meter of water for 30 minutes and meets military-grade (MIL-STD-810H) standards, withstanding drops from 1.22 meters. Powered by a massive 20,000mAh battery, it offers 90 days of standby time or 112 hours of continuous talk time. [Dimensity 7300 CPU | 12GB RAM + 256GB ROM] - Equipped with the 4nm Dimensity 7300 CPU, the T2 Ultra achieves 25% lower power consumption than the Dimensity 7050 while delivering identical performance. Ideal for multitasking and heavy apps, it balances high performance with efficiency for everyday tasks. The 12GB RAM + 256GB ROM ensures ample memory for seamless operation. [High-Precision Navigation] - Supports dual-frequency (L1 + L5) GPS/Beidou/Galileo/GLONASS for stronger signals, better interference resistance, and reduced ionospheric delay (a key factor in accuracy). Perfect for high-speed motion or challenging environments like urban canyons and mountains. [ ONERugged Official Warranty] - ONERugged offers a 12-month warranty, long-term technical support, and 24-hour online customer service. We are committed to providing high-quality after-sales service to our customers. If there is any issue with our products, please feel free to contact our customer service team at any time.

4.5 cm inseam (size 5) Drawcord on elastic waist INFINITEX DRIVE chlorine-resistant fabric is ultra-flat and soft with recycled nylon content This product is part of the adidas sustainable product program: Products are made in more sustainable ways to make the world a better place. Every fibre counts: Recycled nylon saves resources and decreases emissions

This is a 5.79inch E-Paper Display module(with driver board) in Black & White, Support Partial Refresh No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with Raspberry Pi/Jetson Series/STM32 and other controller boards Onboard voltage translator, compatible with 3.3V/5V MCUs Can provide with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Series/STM32)

Three color 7.5 inch epaper display, no backlight, keeps displaying last content for a long time even when power down 7.5 eink module, ultra low power consumption, basically power is only required for refreshing Onboard ESP32, supports Arduino development; Provides Android APP, allows to refresh display content via Bluetooth EDR Supports Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image; supports popular image formats: BMP, JPEG, GIF, PNG, etc Development Resources: www.waveshare.com/wiki/7.5inch_e-Paper_HAT_(B); www.waveshare.com/wiki/e-Paper_ESP32_Driver_Board

✔️ Ultra Low Power Consumption & Long-lasting Display: The 3.7" e-Paper display uses E-Ink technology, providing a paper-like effect without the need for backlight. It retains the last displayed content even when powered off, making it ideal for low-power applications like price tags or shelf labels. 🌱 Wide Compatibility with Popular Boards: This e-Paper HAT+ is compatible with multiple platforms including Rasp-berry Pi, Jetson Nano, Ar-duino, STM32, and ESP32. It connects easily to your controller boards using the SPI interface and standard 40PIN GPIO header. ✔️ Vibrant Color Options: The 3.7" E-Ink display offers vivid Red, Yellow, Black, and White colors, allowing you to create visually engaging projects with an ultra-low power footprint. Perfect for industrial applications and creative DIY projects. 🌱 Onboard Voltage Translator for Flexibility: Equipped with an onboard voltage translator, this display is compatible with both 3.3V and 5V MCUs, offering flexibility for various microcontroller setups. ✔️ Easy-to-Use with Online Resources: The product comes with comprehensive online resources, including manuals and development examples tailored for Raspberry Pi, Jetson Nano, Arduino, STM32, and ESP32. This makes integration with your projects seamless and hassle-free.

【Display & Size】2.42inch SSD1309 128x64 SPI OLED display, 128×64 Resolution, yellow display color, embedded SSD1309 driver chip, SPI / I2C communication 【Compatible】2.42 inch 128×64 OLED display module, Compatible with Raspberry Pi/ Raspberry Pi Pico, forArduino, STM32, ESP32, Jetson Nano, etc. 【Dual interfaces】2.42 inch 128x64 OLED, adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate 【3.3V / 5V】Operating voltage: 3.3V / 5V, with onboard voltage translator, ultra-narrow bezel, conpact size 【With development resources】Comes with online development resources (examples for Raspberry Pi/Raspberry Pi Pico/Arduino/STM32/ESP32/Jetson Nano)

SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc. No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Onboard voltage translator, compatible with 3.3V/5V MCUs Comes with development resources and manual (examples for Raspberry Pi/STM32)

Note:New Version please use corresponding demo code in wiki.This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

7.5 inch e-paper display, no backlight, keeps displaying last content for a long time even when power down For Arduino eink display, ultra low power consumption, basically power is only required for refreshing Universal e-Paper Driver Board with WiFi / Bluetooth SoC ESP32 onboard, supports various Waveshare SPI e-Paper raw panels Supports Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image; supports popular image formats: BMP, JPEG, GIF, PNG, etc Development Resources: www.waveshare.com/wiki/7.5inch_e-Paper_HAT; www.waveshare.com/wiki/e-Paper_ESP32_Driver_Board

Provide online user manual, please check the manual carefully before using. Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/STM32). Partial refresh is not supported. No backlight.keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs. Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Ultra low power consumption, basically power is only required for refreshing Onboard voltage translator, compatible with 3.3V/5V MCUs Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) No backlight, keeps displaying last content for a long time even when power down