raspberry zero 2

Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ I2C interface, only 2 pins are required for moving and light intensity sensing Onboard TSL25911FN light-to-digital converter, with embedded ADC, provides a value that approximates the human eye response to assist the module Onboard PCA9685 chip, provides 12-bit resolution PWM signal for moving control Onboard voltage level translator, compatible with 3.3V/5V operating voltage Specific acrylic board to fix the Raspberry Pi camera, make it easy to install Assembly guide: www.waveshare.com/img/devkit/accBoard/Pan-Tilt-HAT/Pan-Tilt-HAT-assemble.jpg

2.9 inch touch e-Paper display HAT two-color E-Ink touchscreen display for Raspberry Pi, 296×128 pixels, support 5-points capacitive touch, user-defined wakeup gesture Standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi series boards, reversed control interface, I2C bus for touch panel, SPI bus for display, for connecting with controller boards like Arduino/STM32, etc. No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, touch control power supply configuration, basically power is only required for refreshing Support partial refresh, low power, wide viewing angle, paper-like effect, ideal for price tags, shelf labels, industrial instruments etc.

【1.44inch LCD display HAT】128x128, 1.44inch LCD display hat for Raspberry Pi, with embedded controller, communicating via SPI interface. 【Pi 40PIN GPIO extension header】1.44 inch ST7735 LCD display, Standard Pi 40PIN GPIO extension header, supports RPi series boards 【Function】Backlight: LED Operating voltage: 3.3V. 1x joystick (5-position), 3x push buttons, handy and useful. Driver: ST7735S Interface: SPI Display color: RGB, 65K color

ETH-USB-HUB-BOX is Designed for Raspberry Pi Zero, compatible with Zero series boards 3x extended USB ports, compatible with USB 2.0 / 1.1.Incorporates RTL8152B Ethernet chip, supports 1x RJ45 Ethernet port, 10/100M auto-negotiation Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH. Angle rounded design, smooth hand feeling, "simple snap" case lid. Quality ABS material, dull polish surface, anti-fingerprint Comes with two different lids, changing as you like

1.47inch LCD Display Module, Rounded Corners, 172x320 Resolution, 262K RGB colors, clear and colorful displaying effect. SPI interface, minimizes required IO pins, supports controller boards like RPi/Ardu/STM32. 4-wire SPI Communication Interface, IPS Display Panel. Embedded ST7789V3 Driver, 22.0 x 38.5mm Dimensions. Working voltage: 3.3V/5V (Please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly). Comes with relevant resources and tutorials to help you get started quickly: bit.ly/45KP3bT

1.54 inch e-paper module, no backlight, keeps displaying the last content for a long time even when power off For Rasperry Pi epaper module, ultra low power consumption, basically power is only required for refreshing For Jetson Nano eink screen, SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. For Arduino e-ink display, onboard voltage translator, compatible with 3.3V/5V MCUs Provide development resources and manual

320×480 resolution, 262K colors, clear and colorful displaying effect. High touch screen transmittance, fast response and long lifetime Embedded with ST7796S driver chip and FT6336U capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins Onboard TF card slot for storing more pictures, videos, music, etc. Adapting 15PIN connector and 18PIN FPC slot for connecting the LCD module to the host board Onboard voltage translator, compatible with 3.3V / 5V operating voltage Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

2.13inch E-Ink display HAT, Black and White display color, 3.3V/5V operating voltage. Compatible with Raspberry Pi 5/ 4B/3B+/3B/2B/A+/Zero W/Zero 2 W/Pico W/ Pico 2W Jetson Nano,etc. It is E-Ink Display, which is no backlight required, and it can keep displaying last content for a long time even when power down. Which is suitable for scenarios that require long-term static display (such as electronic labels, information boards). Ultra low power consumption, basically power is only required for refreshing. The standby current is less than 0.01uA (almost none), and the typical refresh power consumption is 26.4mW. Partial refresh takes only 0.3s, and full refresh time takes 2s, which significantly improves the interactive experience and reduces the frequency of full-screen flickering. SPI interface, for connecting with controller boards like Ardu/STM32, etc. Provides Online Pinout and sample programs. Comes with Online Tutorial Usage Guide / Driver Board Circuit Diagram / Demo/ Development Resources/FAQ,etc, Please check: n9.cl/vtl3sa

There are 3 options of this screen, this version is 5DP-CAPLCD-H, with narrow-bezel capacitive touch display, air bonding process 800cd/m² High Brightness, 1024x600 Pixels, Toughened Glass Panel, HDMI Interface, IPS Panel. Integrated Structure 【Device & System Support】Supports all versions of Raspberry Pi. Supports Jetson Nano / TX2 / Xavier NX / Orin series boards. Supports Ubuntu, single point touch, driver free. Supports Windows 11 / 10 / 8.1 / 8 / 7, 5-point/single point touch, driver free 【 Wide Viewing Angle】Compared to other TN panels, this IPS touch display features 178° wide viewing angle, providing excellent image and video display performance even when not viewed directly from the front. 【 5-Point Capacitive Touch】 Up to 5-point touch, depending on the operating system. Up to 6H hardness toughened glass panel. ️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.

✅Device & System Support: Supports all versions of Raspberry Pi. Support Jetson Nano/Jetson Orin Nano. Supports Windows 11 / 10 / 8.1 / 8 / 7, 10-point touch, driver free. Support Game Console and Smartphone ✅Configurable Display Orientation: The display orientation is landscape by default, 1920x1080 Resolution (H×V). You can change the software config to portrait display ✅Wide Viewing Angle: Excellent display & color performance. Wide viewing angle up to 178°, color gamut up to 72% NTSC ✅10-Point Capacitive Touch: Up to 10-point touch, depending on the operating system. Up to 6H hardness toughened glass panel. Optical bonding, display well and dustproof ✅Rich E-manuals & Tutorials: Provide rich electronic manuals and tutorials. Please contact sales for more information.

No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3 Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi Adapting SPI interface for connecting with controller boards like Raspberry Pi / Arduino / STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

1.3inch LCD Display HAT with standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards High definition in small size, 240x240 pixels, RGB 65K display color, with embedded controller, communicating via SPI interface IPS screen, wide viewing angle, better display 1x joystick, 3x pushbuttons, handy and useful Comes with development resources and manual (examples for Raspberry Pi)

1.3inch LCD Display for Raspberry Pi Zero/Zero W/Zero 2W/Zero WH/2B/3B/3B+/4B,embedded ST7789 driver Onboard a joystick and six buttons, based on 40-pin GPIO connector design for Raspberry Pi. There are two more buttons on the top for easy operation. Multi key design allows more function keys to be set. Copper column is added at the joystick to make it more comfortable for users SPI interface, less pin occupation, Backlight: LED, Operating voltage: 3.3V 240×240 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect Provides open source demo codes available for Raspberry Pi development board

【Bidirektionale Mini HDMI Übertragung】: Unterstützt Mini HDMI zu HDMI und HDMI zu Mini HDMI. Es kann Ihnen helfen, Audio und Video von einer Kamera, einem Camcorder, einem Tablet, einer Grafikkarte oder einem Laptop über den Mini-HDMI-Anschluss auf Ihren HDTV, Monitor und Projektor mit HDMI-Anschluss zu streamen. 【4K@60Hz Mini Hdmi】 :CableCreation Mini HDMI zu HDMI Kabel unterstützt hochauflösende Audio- und Videoqualität von bis zu 4K@60Hz(3840x2160P UHD),2K@120Hz (QHD), 1080p@120Hz (HD), 3D, HDR, ARC und eine Brandbreite bis 18Gbps. 【Hochwertige Materialien】:Geflochtene Jacke und das SR Anti Break Design machen es langlebiger. Vergoldete Anschlüsse und Aluminiumgehäuse sorgen für eine maximale Signalqualität und schützen effektiv vor EMI Störungen. 【Breite Kompatibilität】 :Raspberry Pi Zero, Pi zero w, Sony HDR-XR500, Nikon Z6, Nikon DX D500, Nikon D3200, Nikon D810, Canon EOS 90D, Canon EOS RP, Canon EOS R, Canon EOS 7D Mark II, Canon XA40, Canon VIXIA HF G60, Canon XA55, Canon XA50, Raspberry Pi Zero, Raspberry Pi Zero W, Lenovo 12-inch Thinkpad Yoga, NUC barebones desktop, Geforce GT 430 graphics card, NVIDIA SHIELD tablet K1, camcorder, DSLR. 【24 Monate Garantie】 :Wir bieten eine 24-monatige Produktaustauschgarantie und lebenslangen technischen Support.Bitte zögern Sie nicht, uns zu kontaktieren, wenn Sie Fragen haben. Ein freundlicher und schneller Kundenservice wird innerhalb von 24 Stunden angeboten.

Supports all versions of Raspberry Pi. Supports Jetson Nano / TX2 / Xavier NX / Orin series boards. Supports Windows 11 / 10 / 8.1 / 8 / 7, 10-point touch, driver free Supports automatic recognition of HDMI / DP / Type-C signal sources. Images for reference only, please refer to the package content for the detailed part list. Excellent Display & Color Performance. Wide viewing angle up to 178°, color gamut up to 72% NTSC. 100% sRGB covers more gamut area of red, green and blue, Designer-professional-grade color gamut. Up to 10-point touch, depending on the operating system. Up to 6H hardness toughened glass panel. Optical bonding, display well and dustproof Multi-language OSD menu support (can be used for power control, adjusting brightness/contrast, etc.). Support software DDC/CI brightness adjustment. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico, Supports Windows 11/10/8.1/8/7 and Jetson Nano/TX2/Xavier N /Orin, 1920×1200, IPS Display, 10-Point Touch 1920 × 1200 resolution, provides clear image and vivid color display effect Excellent Display Performance With 178° Wide Viewing Angle. Ferrite Hi-Fi Speaker, Larger Volume, Wider Sound Range, Better Sound Quality One-button switch between landscape and portrait display to meet the needs of different usage scenarios Up to 10-point touch, depending on the operating system. Up to 6H hardness toughened glass panel. Optical Bonding, display well Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc., Supports GNSS positioning (GPS,GLONASS,BeiDou and Galileo).Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT Onboard USB interface, to test AT Commands, get GPS positioning data, and so on.Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0Ω resistor Breakout UART control pins, to connect with host boards like Arduino/STM32.SIM card slot, compatible with both normal SIM card and NB-IoT specific card 2x LED indicators, easy to monitor the working status,Baudrate: 300bps~3686400bps,Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)

This is 2inch LCD Display Module, 240×320 resolution, 262K colors, clear and colorful displaying effect Embedded ST7789VW driver chip. SPI Interface, Compatible with Raspberry Pi/with Ardui/ STM32, etc. As a 2-inch IPS display module with a resolution of 240 * 320, it uses an SPI interface for communication. The LCD has an internal controller with basic functions, which can be used to draw points, lines, circles, and rectangles, and display English, Chinese as well as pictures. The LCD supports 12-bit, 16-bit, and 18-bit input color formats per pixel, namely RGB444, RGB565, and RGB666 three color formats, this demo uses RGB565 color format, which is also a commonly used RGB format. For most LCD controllers, the communication mode of the controller can be configured, usually with an 8080 parallel interface, three-wire SPI, four-wire SPI, and other communication methods. This LCD uses a four-wire SPI communication interface, which can greatly save the GPIO port, and the communication speed will be faster.

720×1280 Resolution, Optical Bonding Toughened Glass Panel, HDMI Interface, IPS Panel, 5-Point Touch The display orientation is portrait by default, 720×1280 resolution (H×V). Change the software config for landscape display. Supports all versions of Raspberry Pi; Supports Ubuntu, single point touch, driver free; Supports Windows 11 / 10 / 8.1 / 8 / 7, 5-point touch, driver free Up to 5-point touch, depending on the operating system; Up to 6H hardness toughened glass panel; Optical Bonding, display well Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

【Breite Kompatibilität】Das GeeekPi Raspberry Pi 7-Zoll-LCD-Display ist ein tragbarer IPS-Bildschirm mit einer Auflösung von 1024x600 Pixeln und einer flüssigen Bildwiederholrate von 60Hz. Es ist kompatibel mit Raspberry Pi 5/Pi 4B/3B+/3B/B+/Zero/400, Jetson Nano, Banana Pi M5/M2 Zero, VisionFive und Windows 10/8/7;HINWEIS: Auf der Bildschirmoberfläche befindet sich eine Schutzfolie. Bitte entfernen Sie diese vor der Verwendung 【Kapazitiver Multi-Touchscreen】Der kapazitive Touchscreen unterstützt in der Regel Multi-Touch-Eingaben und ermöglicht Benutzern, Gesten wie Pinch-to-Zoom oder Zwei-Finger-Scrollen auszuführen. 【Hohe Auflösung & flüssige Bildwiederholrate】Die Bildschirmauflösung beträgt bis zu 1024x600 Pixel und sorgt für klare und detaillierte Bilder. Die Bildfrequenz beträgt 60Hz und bietet ein flüssiges und ruckelfreies Seherlebnis. Beim Abspielen von HD-Videoinhalten hat der Bildschirm leuchtende Farben und realistische visuelle Effekte, was ein immersives Seherlebnis bietet. 【Mehrzwecknutzung】Neben der Verwendung als tragbarer Bildschirm für Ihr SBC-Entwicklungsboard kann es auch als sekundärer Monitor für Ihren PC verwendet werden, um Ihren Arbeitsbereich zu erweitern. Zusätzlich kann es in DIY-Projekte integriert werden, um zusätzliche Funktionen zu bieten. 【Mehrere Sprachen】Benutzer können leicht navigieren und Einstellungen in ihrer bevorzugten Sprache anpassen, wobei Englisch, Chinesisch, Französisch, Italienisch, Niederländisch, Japanisch, Koreanisch und Russisch unterstützt werden.

【Multiple motherboards Support】IMX219-160 Camera, Fits NVIDIA Jetson Nano Developer Kit and RPi 5/4B/3B+/3B/Zero/Zero Zero 2 W/WH Boards and Compute Module CM3 / CM3+ / CM4 Note: Extra FPC cable is required for Raspberry Pi 5, CM3/3+/4 and Zero series 【High Resolution】3280 × 2464 High Resolution, 8 Megapixels Camera, 160° FOV 【Suitable for AI projects】Combined with Jetson Nano AI computer, this camera suits for AI projects such as:Face recognition,road mark detection,license plate recognition

🔌 4 Channel Relay HAT for Raspberry Pi GPIO: 4-CH Relay HAT is designed with a standard 40-pin GPIO header, providing a compact 4 channel relay expansion board for Raspberry Pi Zero, Zero W, Zero WH, 2B, 3B, 3B+, 4B and 5 development projects. ⚙️ 5A Relay Module for Control Projects: This 4 channel relay module supports independently controlled relay outputs, with each relay rated up to 5A at 250V AC or 5A at 28V DC, suitable for GPIO control, automation testing and electronics prototyping. 🛡️ Optocoupler Isolation Relay Board: The GPIO relay expansion board integrates photo-coupler isolation to help reduce interference between the control side and relay side, improving stability for embedded control, lab testing and maker applications. 💡 Relay Status LED Indicators: Each channel includes an onboard relay status indicator LED, allowing users to visually check relay operating state in real time during Pi GPIO relay testing, debugging and project development. 🧩 Configurable GPIO Relay Control: Relay control jumper headers allow users to use default GPIO assignments or connect alternative GPIO pins with jumper wires, offering flexible control options for custom Pi relay module applications.

Kompatibel mit Raspberry Pi 5 / Raspberry Pi 4 / 3B+ / 3B / Zero 2 W / Zero W / Zero GPIO Edge Extension ist ein Modul, mit dem die 40-Pin-GPIO-Pins des Raspberry Pi nicht mehr bequem verwendet werden können. Vertikaler Stiftkopf Horizontaler Stiftkopf Paket beinhaltet: 1 x GPIO Edge Extension

Transparentes Gehäuse für den Raspberry Pi Zero Passend für: Raspberry Pi Zero W Raspberry Pi Zero WH Raspberry Pi Zero 2 W Raspberry Pi Zero 2 WH mit Schrauben und Muttern Maße: 65,6 x 23,1 x 3,2 mm

Waveshare Ethernet / USB HUB HAT for Raspberry Pi with 3x extended USB ports, compatible with USB 2.0 / 1.1 Ethernet / USB HUB HAT expansion board incorporates RTL8152B Ethernet chip, supports 1x RJ45 Ethernet port, 10/100M auto-negotiation Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH, plug-and-play, without preventing other HATs USB HUB connector, for connecting with Raspberry Pi 4B/3B+/3A+/2B or PC through USB cable Outline Dimensions: 2.56 × 1.18 inch

Designed for Raspberry Pi Zero, compatible with Zero series boards Incorporates RTL8152B Ethernet chip, with 10M / 100M auto-negotiation RJ45 port PoE (Power over Ethernet) feature, 802.3af-compliant. Fully isolated SMPS (Switch Mode Power Supply) 3x extended USB ports, compatible with USB 2.0 / 1.1. Angle rounded design, smooth hand feeling, "simple snap" case lid Quality ABS material, dull polish surface, anti-fingerprint. Comes with two different lids, changing as you like

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano; Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning; Supports data transferring Onboard USB TO UART converter CP2102 for UART debugging; 6x LEDs for indicating the module working status; SIM card slot for 1.8V/3V SIM card RTC with backup batt holder;Baudrate auto detection (1200bps ~115200bps); Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands); Supports SIM application toolkit: GSM 11.14 Release 99;

There are 3 options of this screen, this version is 5DP-CAPLCD-B, with wide-bezel capacitive touch display, optical bonding process. 1024x600 Pixels, Toughened Glass Panel, HDMI Interface, IPS Panel. 【Device & System Support】Supports all versions of Raspberry Pi. Supports Jetson Nano / TX2 / Xavier NX / Orin series boards. Supports Ubuntu, single point touch, driver free. Supports Windows 11 / 10 / 8.1 / 8 / 7, 5-point/single point touch, driver free 【 Wide Viewing Angle】Compared to other TN panels, this IPS touch display features 178° wide viewing angle, providing excellent image and video display performance even when not viewed directly from the front. 【 5-Point Capacitive Touch】 Up to 5-point touch, depending on the operating system. Up to 6H hardness toughened glass panel. Optical bonding, display well and dustproof ️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.

8inch 768x1024 LCD, IPS display panel with 178° wide viewing angle, up to 6H hardness toughened glass panel Up to capacitive 10-Point Touch(depending on the operating system). Supports Backlight Adjustment Via Software When used for Raspberry Pi, compatible with Raspberry Pi OS, 10-point touch, driver free; compatible with Ubuntu/Kali/WIN10 IoT, single point touch, driver free; compatible with Retropie, driver free When used for Jetson Series Board, compatible with Ubuntu, single point touch, driver free When used for PC, compatible with Windows 11 / 10 / 8.1 / 8 / 7, 10-point touch, driver free

122 x 250 pixels, 2.13 inch e-paper e-ink display module is based on 40PIN GPIO header design for Raspberry Pi, intended for Raspberry Pi series motherboard, such as for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/ Supports partial refresh minimum 560ms (4-wire SPI status) and full refresh Minimum 950ms (4-wire SPI status). We provide open source demo codes available for Raspberry Pi, Ardui. Mega and STM32 development boards SPI communication interface is reserved to facilitate connect to Ardui/STM32 and other control boards. SPI interface, less pin occupation. Adds a SPI line number selector switch Onboard Voltage Translator, which can be compatible with 3.3V and 5V MCUs Low power consumption. Keeps displaying last content for a long time even when power down. Basically power is only required for refreshing