waveshare esp32 s3

Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Blue-T 5 (LE) Built-in 512KB of Static RAM and 384KB ROM, options for 4MB Flash memory with 2MB PSRAM / 8MB Flash memory with 8MB PSRAM Castellated module and onboard ceramic antenna, allows soldering direct to carrier boards Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios Integrated with USB serial port full-speed controller, 24 × GPIO pins allows flexibly configuring pin functions. 4 × SPI, 2 × I2C, 3 × UART, 2 × I2S, 2 × ADC, etc.

Industrial 8-Ch ESP32-S3 Digital Input & Output Controller.Supports WiFi / Bluetooth / RS485 / CAN / Ethernet Port, etc.Built-in protection circuits such as power isolation and optocoupler isolation, Safe & Stable & Reliable Based on ESP32-S3, Designed for AIoT market.Equipped with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz, with Powerful AI Computing Performance and Security Encryption Mechanism, Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication Onboard multiple isolation protection circuits.Multiple protections, more safe and reliable Fully Isolated Digital Input.Fully Isolated Digital Input/Output, with Bi-directional Optocoupler isolation, supports Passive and Active Inputs (PNP or NPN Type) Fully Isolated Digital Output.Adopts Darlington transistor open-collector output, single-channel sink current up to 500 mA, capable of directly driving relays

Waveshare ESP32-S3 1.47 Zoll Display Dev-Board, 172×320, 262K Color, 240MHz, WiFi & Bluetooth, RGB LED Das ESP32-S3 1.47 Zoll Display Development Board bietet eine hohe Leistungsfähigkeit und vielseitige Anwendungsmöglichkeiten durch die Integration von Wi-Fi, Bluetooth BLE 5 und einem 1.47-Zoll-LCD-Display. Mit seinem dual-core Prozessor (Xtensa 32-bit LX7) und einer Taktfrequenz von bis zu 240 MHz eignet sich das Board ideal für die schnelle Entwicklung von HMI- und ESP32-S3-basierten Anwendungen. Das Board unterstützt LVGL für reibungslose grafische Benutzeroberflächen (GUI) und bietet mehrere Peripherie-Schnittstellen für erweiterbare Anwendungsmöglichkeiten. Merkmale im Überblick Integriertes 1.47-Zoll LCD Display mit 172×320 Auflösung und 262K Farben. Unterstützt 2.4 GHz Wi-Fi (802.11 b/g/n) und Bluetooth 5 (BLE) mit

The ESP32-S3-Pico-M(with pre-soldered header) is a compact-size microcontroller development board with multiple digital interfaces. Supports Development Environments Such as ESP-IDF/MicroPython, etc Tiny Size & Easy integration. Type-C connector, easier to use. 27 x multi-function GPIO pins. Castellated module allows soldering directly to carrier boards Adopts ESP32-S3R2 chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 512KB SRAM, 384KB ROM, 2MB psram, 16MB Flash memory Integrated 2.4GHz Wi-Fi, with superior RF performance. Onboard CH343 and CH334 chips can meet the needs of USB and UART development via a Type-C interface Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip with load current up to 2A. Supports Raspberry Pi Pico expansion board ecology, suitable for artificial intelligence IoT application development

Adopts ESP32-S3FH4R2/ESP32-S3-PICO-1-N8R8 chip with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency Built in 512KB of Static RAM and 384KB ROM, 8MB Flash memory with 8MB PSRAM Integrated 2.4GHz Wi-Fi and Blue-T LE dual-mode wireless communication, with superior RF performance Onboard FPC 8PIN connector, supports adapting USB Type-C port via adapter board 34 × multi-function GPIO pins Rich peripheral interfaces, including SPI, I2C, UART, ADC, and PWM, etc. to achieve various functions flexibly Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios

Adopts ESP32-S3R2 chip with high-performance Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz Built in 512KB S-RAM, 384KB ROM, 2MB of PS-RAM, and 16MB Flash memory. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, featuring superior RF performance Equipped with the A7670E-FASE cellular module, supports 4G Cat-1/2G networking, GNSS positioning, telephone calls, SMS, and other functions. Onboard USB switching IC and DIP switch for switching to use the USB interface of A7670E, suitable for connecting with PC for dial-up internet or debugging of A7670E module Onboard batt charging, solar charging, power management, batt capacity measurement, and related protection circuits, supports USB and solar charging with real-time batt capacity measurement. Onboard batt holder (batt is NOT included), adapting VBAT pin header for connecting to external 3.7V batt, with anti-reverse protection Rich peripheral interfaces such as camera interface, TF card slot, USB port, 38PIN header, etc., easy to expand and achieve various functions. Onboard multiple DIP switches for camera on/off, switching USB channels to avoid interface conflict, and setting power on/off for some circuits to reduce power consumption

ESP32-S3-Touch-AMOLED-2.41-B, with case, better protection. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM. Onboard UART and I2C SH1.0 4PIN connectors, with a reserved 34PIN 2.54mm pitch GPIO header for expandability Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with an onboard antenna. The device allows switching to an external antenna by resoldering an onboard resistor. Supports capacitive touch function, controlled via I2C interface, with interrupt support Onboard 2.41inch AMOLED display, QSPI interface, 600 450 resolution, 16.7M color. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for motion gesture detection, step counting, and more Onboard PCF85063 RTC chip with a reserved SH1.0 RTC batt header (supports charging) for RTC functionality. Onboard RST button, along with programmable BOOT and PWR buttons for customizable functionality and flexible development Onboard 3.7V MX1.25 Lithium batt recharge/discharge header. Onboard TF card slot, enabling external storage for pictures or files.Onboard USB Type-C port for power supply, program downloading, and debugging, making development more convenient

ESP32-S3-Touch-AMOLED-2.41, standard version, without case. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM. Onboard UART and I2C SH1.0 4PIN connectors, with a reserved 34PIN 2.54mm pitch GPIO header for expandability Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with an onboard antenna. The device allows switching to an external antenna by resoldering an onboard resistor. Supports capacitive touch function, controlled via I2C interface, with interrupt support Onboard 2.41inch AMOLED display, QSPI interface, 600 450 resolution, 16.7M color. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for motion gesture detection, step counting, and more Onboard PCF85063 RTC chip with a reserved SH1.0 RTC batt header (supports charging) for RTC functionality. Onboard RST button, along with programmable BOOT and PWR buttons for customizable functionality and flexible development Onboard 3.7V MX1.25 Lithium batt recharge/discharge header. Onboard TF card slot, enabling external storage for pictures or files.Onboard USB Type-C port for power supply, program downloading, and debugging, making development more convenient

Common network port version. Based on ESP32-S3 microcontroller with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, with superior RF performance High quality relay, contact rating: ≤10A 250V AC / 30V DC. Supports passive and active digital input, with bi-directional optocoupler isolation. The relay supports digital input linkage control Onboard isolated RS485 interface, for connecting to various RS485 Modbus industrial modules or sensors. Onboard pin header, allowing access to other devices. Onboard USB Type-C port for power supply, firmware downloading and debugging Onboard power supply screw terminal, supports 7~36V wide voltage input, suitable for industrial applications. Onboard RTC chip, supports scheduled tasks. Onboard W5500 Ethernet chip for extending 10/100Mbps network port through SPI interface. Onboard optocoupler isolation to prevent interference from external high-voltage circuit connected to the relay. Onboard digital isolation to prevent interference from external signal Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal. Onboard TF card slot for external TF card storage of images and files. Built-in buzzer, RGB LED, power supply and RS485 TX/RX indicators for monitoring the operating status of the devices. Rail-mounted ABS case, easy to install, safe to use

This is the RGB LCD driver board only, not include any size touch LCD. For more detailed part list, please refer to the Package Content image . Adopts ESP32-S3-WROOM-1-N8R8 module with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB Flash memory. Integrated 2.4GHz W-Fi and Blue-T LE dual-mode wire-less communication, with superior RF performance. Type-C connector, easier to use. Onboard 40Pin SPI+RGB and 18Pin SPI LCD screen connector, strong compatibility and expandability Onboard Lithium batt recharge manager ETA6096 and MX1.25 lithium batt header Castellated module allows soldering direct to carrier boards Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios

The ESP32-S3-Touch-LCD-4.3C-BOX(With plastic case) integrates a 4.3inch capacitive touch display and an audio module, supporting AI speech interaction and the LVGL graphical interface. Combining display, touch, and voice in one device, it enables easy development of intelligent human-machine interaction terminals Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM Onboard 4.3inch capacitive touch display, 800 x 480 resolution, 65K color. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Onboard ES8311 audio codec chip and ES7210 echo cancellation circuit. Onboard voltage regulator, supports 7 ~ 36V wide range power supply Onboard RTC chip and Batt holder to ensure time data is not lost during power loss when Batt is installed. Onboard I2C interface, TF card slot, MX1.25 2PIN Batt header, and digital isolated IO interfaces, etc. Supports passive and active digital input with bi-directional optocoupler isolation, and the active digital input supports positive and negative voltages Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current. Onboard LED indicators for indicating the power and Batt recharging status. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios

PoE network port version, with built-in PoE module for PoE capability (compliant with IEEE 802.3af standard). Based on ESP32-S3 microcontroller with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, with superior RF performance High quality relay, contact rating: ≤10A 250V AC / 30V DC. Supports passive and active digital input, with bi-directional optocoupler isolation. The relay supports digital input linkage control. Onboard isolated CAN interface, for connecting to various CAN devices. Onboard pin header, allowing access to other devices Onboard USB Type-C port for power supply, firmware downloading and debugging. Onboard power supply screw terminal, supports 7~36V wide voltage input, suitable for industrial applications. Onboard RTC chip, supports scheduled tasks. Onboard W5500 Ethernet chip for extending 10/100Mbps network port through SPI interface Onboard optocoupler isolation to prevent interference from external high-voltage circuit connected to the relay. Onboard digital isolation to prevent interference from external signal. Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal Onboard TF card slot for external TF card storage of images and files. Built-in buzzer, RGB LED, power supply and CAN TX/RX indicators for monitoring the operating status of the devices. Rail-mounted ABS case, easy to install, safe to use

Common network port version. Based on ESP32-S3 microcontroller with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, with superior RF performance High quality relay, contact rating: ≤10A 250V AC / 30V DC. Supports passive and active digital input, with bi-directional optocoupler isolation. The relay supports digital input linkage control. Onboard isolated CAN interface, for connecting to various CAN devices. Onboard pin header, allowing access to other devices Onboard USB Type-C port for power supply, firmware downloading and debugging. Onboard power supply screw terminal, supports 7~36V wide voltage input, suitable for industrial applications. Onboard RTC chip, supports scheduled tasks. Onboard W5500 Ethernet chip for extending 10/100Mbps network port through SPI interface Onboard optocoupler isolation to prevent interference from external high-voltage circuit connected to the relay. Onboard digital isolation to prevent interference from external signal. Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal Onboard TF card slot for external TF card storage of images and files. Built-in buzzer, RGB LED, power supply and CAN TX/RX indicators for monitoring the operating status of the devices. Rail-mounted ABS case, easy to install, safe to use

Adopts ESP32-S3FH4R2 chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 4MB Flash memory Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance. Type-C connector, easier to use. Onboard QMI8658C attitude sensor. Onboard 8 × 8 RGB LED matrix for colorful lighting display Adapting Dout pin for extending RGB matrix. 17 × multi-function GPIO pins. Rich peripheral interfaces for achieving various functions flexibly Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios

PoE network port version, with built-in PoE module for PoE capability (compliant with IEEE 802.3af standard). Based on ESP32-S3 microcontroller with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, with superior RF performance High quality relay, contact rating: ≤10A 250V AC / 30V DC. Supports passive and active digital input, with bi-directional optocoupler isolation. The relay supports digital input linkage control Onboard isolated RS485 interface, for connecting to various RS485 Modbus industrial modules or sensors. Onboard pin header, allowing access to other devices. Onboard USB Type-C port for power supply, firmware downloading and debugging Onboard power supply screw terminal, supports 7~36V wide voltage input, suitable for industrial applications. Onboard RTC chip, supports scheduled tasks. Onboard W5500 Ethernet chip for extending 10/100Mbps network port through SPI interface. Onboard optocoupler isolation to prevent interference from external high-voltage circuit connected to the relay. Onboard digital isolation to prevent interference from external signal Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal. Onboard TF card slot for external TF card storage of images and files. Built-in buzzer, RGB LED, power supply and RS485 TX/RX indicators for monitoring the operating status of the devices. Rail-mounted ABS case, easy to install, safe to use

This version comes with a plastic case. Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BLT 5 (LE), with onboard antenna Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 4.3inch capacitive touch display, 800×480 resolution, 65K color. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support Onboard voltage regulator, supports 7~36V wide range power supply. Onboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P batt header and digital isolated IO interfaces, etc. Supports passive and active digital input, with bi-directional optocoupler isolation. Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current Onboard LED indicators for indicating the power and batt recharging status. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios

Industrial 8-Ch ESP32-S3 WiFi Relay Module Based on ESP32-S3, Supports WiFi / Bluetooth.Onboard Digital input, RS485, and ethernet port interfaces. Built-in protection circuits such as power isolation and optocoupler isolation, Safe & Stable & Reliable Based on ESP32-S3, Designed for AIoT market.Equipped with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz, with Powerful AI Computing Performance and Security Encryption Mechanism; Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication Onboard multiple isolation protection circuits.Multiple protections, more safe and reliable supports RS485 and Bluetooth / WIFi remote control.Onboard 8-ch relays and 8-ch digital inputs Contact rating of the onboard relay up to 10A 250V AC / 30V DC Directly controlling 220VAC home appliances, or devices below 30V DC Digital input.Supports passive (dry contact) and active (wet contact) digital input, with bi-directional optocoupler isolation

Adopts ESP32-S3R2 chip with high-performance Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz Built in 512KB S-RAM, 384KB ROM, 2MB of PS-RAM, and 16MB Flash memory. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, featuring superior RF performance Equipped with the SIM7670G cellular module, supports 4G Cat-1 networking, GNSS positioning and other functions. Onboard USB switching IC and DIP switch for switching to use the USB interface of SIM7670G, suitable for connecting with PC for dial-up internet or debugging of SIM7670G module Onboard batt charging, solar charging, power management, batt capacity measurement, and related protection circuits, supports USB and solar charging with real-time batt capacity measurement. Onboard batt holder (batt is NOT included), adapting VBAT pin header for connecting to external 3.7V batt, with anti-reverse protection Rich peripheral interfaces such as camera interface, TF card slot, USB port, 38PIN header, etc., easy to expand and achieve various functions. Onboard multiple DIP switches for camera on/off, switching USB channels to avoid interface conflict, and setting power on/off for some circuits to reduce power consumption

R7FA4 PLUS B Entwicklungsbrett R7FA4 PLUS B Entwicklungsboard: Auf R7FA4M1AB3CFM basierend, kompatibel mit Arduino UNO R4 WiFi Eine erweiterte Version des Arduino UNO R4 WiFi, ausgestattet mit dem ESP32-S3FN8 für zusätzliche Wireless-Kommunikation und einem 12×8 LED-Matrix-Display. Ideal für IoT-Anwendungen und Projekte, die eine visuelle Ausgabe erfordern. Merkmale im Überblick Basierend auf R7FA4M1AB3CFM, erweitert mit ESP32-S3FN8 für 2.4GHz WiFi und Bluetooth LE. Unterstützt eine Vielzahl von Shields dank dualer Betriebsspannung (5V/3.3V) und hoher Stromausgabe (bis zu 2000mA). Onboard 12×8 rote LED-Matrix unterstützt die Anpassung von Anzeigeeffekten. Technische Daten Mikrocontroller: R7FA4

R7FA4 PLUS B EntwicklungsbrettR7FA4 PLUS B Entwicklungsboard: Auf R7FA4M1AB3CFM basierend, kompatibel mit Arduino UNO R4 WiFi Eine erweiterte Version des Arduino UNO R4 WiFi, ausgestattet mit dem ESP32-S3FN8 für zusätzliche Wireless-Kommunikation und einem 12×8 LED-Matrix-Display. Ideal für IoT-Anwendungen und Projekte, die eine visuelle Ausgabe erfordern. Merkmale im Überblick Basierend auf R7FA4M1AB3CFM, erweitert mit ESP32-S3FN8 für 2.4GHz WiFi und Bluetooth LE.Unterstützt eine Vielzahl von Shields dank dualer Betriebsspannung (5V/3.3V) und hoher Stromausgabe (bis zu 2000mA).Onboard 12×8 rote LED-Matrix unterstützt die Anpassung von Anzeigeeffekten.Technische Daten Mikrocontroller: R7FA4 (32-Bit ARM Cortex-M4), ESP32-S3FN8 (Dual-Core 32-Bit Xtensa LX7).Speicher: 256kB Flash, 32kB RAM; ESP32-S3FN8: 384kB ROM, 512kB RAM, 8MB Flash.Drahtlose Kommunikation: 2.4GHz WiFi + Bluetooth LE.Stromversorgung: 6V 24V DC Eingang, USB Typ-C Anschluss.Sonstige Daten Onboard Spannungsregler und Spannungsübersetzer für reibungslose Kommunikat

ESP32-S3-Touch-LCD-5,Integrates RGB interface LCD with 5-point capacitive touch, multiple peripheral interfaces IPS Display Panel,Excellent display performance, 178° wide viewing angle * Capacitive 5-point touch, supports touch function with I2C interface, 5-point touch for flexible operation and smooth multi-point UI interaction Supports multiple peripherals, Supports the expansion of multiple peripherals via CAN, RS485, I2C and isolated IO interfaces Support Batch Customization,Support software and hardware customization.Including hardware interface, LOGO, label, case and web page, etc.

Integrated LCD Screen, TF Card Slot, Boot Button and Other Peripheral interfaces Suitable For Applications Such As Wireless USB Flash Drive, USB WiFi/Bluetooth, USB Dongle Based On ESP32-S3 Adopts ESP32-S3R2 chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz Built in 512KB SRAM, 384KB ROM, 2MB of on-chip PSRAM, and onboard 16MB Flash memory Onboard 1.14inch 240×135 pixels 65K color IPS LCD display Integrated 2.4GHz WiFi and Bluetooth LE wireless communication WiFi supports Infrastructure BSS in Station, SoftAP, and Station + SoftAP modes WiFi supports 1T1R mode with data rate up to 150 Mbps Bluetooth supports high power mode (20dBm) Internal co-existence mechanism between Wi-Fi and Bluetooth to share the same antenna Onboard 3PIN UART port, 3PIN GPIO header and 4PIN I2C port Equipped with plastic case and cables Provides online open-source demo and resources, more convenient for learning and development

Based On R7FA4M1AB3CFM, Compatible With Arduino UNO R4 WiFi Onboard ESP32-S3 module, integrates 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, allowing the maker to use it for wireless communication. Combined with Arduino IoT Cloud, you can remotely monitor and control the projects. Onboard 12x8 red LED matrix, suitable for creative projects with animation or plotting sensor data, no additional hardware is required. Equipped with 256 kB Flash and 32 kB RAM, the expanded memory can easily handle complex projects. The R7FA4 Plus development board adds a 12-bit DAC, CAN bus, and operational amplifiers, providing expanded functionality and flexibility for designs. Onboard 5V/3.3V headers for easy voltage switching, allowing the use of more expansion modules. Onboard power indicator LED (PWR), USER LED, serial port receive indicator LED (RX), and transmit indicator LED (TX), making it easy to monitor the working status of the development board. Onboard ICSP interface, can be used as an SPI interface. Supports user soldering of corresponding interface insertion into the experimental board.

High-Performance Processor: The device features a powerful Xtensa 32-bit LX7 dual-core processor, running at up to 240MHz, ensuring efficient and responsive performance for various applications. Connectivity Options: Supports 2.4GHz Wi-Fi and Bluetooth 5 (LE) with an onboard antenna, enabling seamless wireless communication for IoT, smart devices, and AI speech interactions. Generous Memory and Storage: Equipped with 512KB SRAM, 384KB ROM, 16MB Flash, and 8MB PSRAM, providing ample space for smooth operation and data storage for advanced applications. Advanced Display and Audio Capabilities: Adopts E Ink Spectra 6 (E6) technology for high contrast, vibrant color display, and ultra-low power consumption, while onboard audio chips enable voice capture and playback for AI-based interactions. Versatile and User-Friendly Design: A simple solid wood photo frame with a rotatable stand and hook hanger, offering flexibility for various use cases. The open-source code allows for easy customization, while the optional large capacity lithium bat ensures thousands of refreshes on a single charge.

240×320 resolution, 262K colors, clear and colorful displaying effect High touch screen transmittance, fast response and long lifetime Embedded with ST7789T3 driver chip and CST328 capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins Adapting 13PIN connector and 18PIN FPC slot for connecting the LCD module to the host board Onboard voltage translator, compatible with 3.3V / 5V operating voltage Provide online development resources and E-manual (examples for Raspberry Pi / ESP32S3 / Raspberry Pi Pico ),please contact us via Amazon

Equipped with ESP32-S3-WROOM-1 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency, offering powerful data processing capabilities; Supports 2.4GHz WiFi (802.11 b/g/n) and Blue-T 5 (LE), with onboard antenna. Onboard RGB LED indicator for real-time monitoring the operating status of the module; Onboard 3.7V MX1.25 Lithium batt recharge / discharge header for flexible power supply solution, extending device operation time; Onboard 2 × 10 solder pads, including 14 × GPIO, 1 × I2C, and 1 × UART, for external device expansion. Built in 512KB of Static RAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory; Compact size design, more space-saving, making it ideal for embedded applications Supports TCP communication and WiFi AP /STA preview modes, compatible with Windows systems; Provides an Android APP for easy configuration of module parameters; The Blue-T APP is only used for configuring parameters such as the module's IP and device name. It does not support viewing thermal images. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.

ESP32-S3 AI Smart Speaker Dev Board Adopts ESP32-S3R8 module with 32-bit LX7 dual-core processor, up to 240MHz main frequency, integrated 512KB S-RAM, 384KB ROM, 8MB PSRAM, external 16MB Flash memory, onboard TF card slot for storing audio files, etc. ESP32-S3 Audio Board Supports AI speech interaction. Onboard audio decoding chip, dual microphones and speaker header. Dual microphone array with noise reduction and echo cancellation, suitable for accurate speech recognition and near/far-field wake-up Onboard LCD interface, compatible with Waveshare 1.47inch/2inch/2.8inch/3.5inch LCDs and other SPI displays. Onboard DVP interface, compatible with ESP32 OV2640/OV5640 cameras. Onboard 7x surround RGB LEDs, programmable for a variety of dynamic effects Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) wireless connectivity, with onboard antenna Integrated PCF85063 RTC chip, supports power-off time retention for alarm, scheduled task, and wake-up functions. Built-in battery recharge management module. Multiple reserved buttons and battery switch for customized function development

Equipped with ESP32-S3-WROOM-1 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency, offering powerful data processing capabilities; Supports 2.4GHz WiFi (802.11 b/g/n) and Blue-T 5 (LE), with onboard antenna. Onboard RGB LED indicator for real-time monitoring the operating status of the module; Onboard 3.7V MX1.25 Lithium batt recharge / discharge header for flexible power supply solution, extending device operation time; Onboard 2 × 10 solder pads, including 14 × GPIO, 1 × I2C, and 1 × UART, for external device expansion. Built in 512KB of Static RAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory; Compact size design, more space-saving, making it ideal for embedded applications Supports TCP communication and WiFi AP /STA preview modes, compatible with Windows systems; Provides an Android APP for easy configuration of module parameters; The Blue-T APP is only used for configuring parameters such as the module's IP and device name. It does not support viewing thermal images. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.

1.69inch Round LCD Display Module with Touch panel, Micro LCD Display 240×280 resolution, 262K colors, clear and colorful displaying effect High touch screen transmittance, fast response and long lifetime Embedded ST7789V2 driver chip and CST816T capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins, supports controller boards like Raspberry Pi 5 / ESP32S3 / Raspberry Pi Pico / Arduino / STM32 Comes with online development resources and manual (examples for Raspberry Pi / ESP32S3 / Raspberry Pi Pico / Arduino / STM32)

This ESP32-S3 E-Paper driver board is a compact-size microcontroller development board with 60PIN e-paper display connector. Adopts ESP32-S3-WROOM-2-N32R16V module, which is equipped with Xtensa 32-bit LX7 dual-core processor with 240MHz running frequency, built-in 512KB Static RAM (TCM), 16MB PSRAM and 32MB Flash. Supports Wi-Fi and BLE dual-mode communication, onboard TF card slot, low power audio codec, ETA6098 high-efficiency Lithium Batt recharge manager and MX1.25 Lithium Batt header. Onboard CH343 and CH334 USB HUB chips, supports USB and UART development at the same time via a Type-C port. Adapting multiple GPIO pins for easy expansion with a variety of peripheral devices. Adopts E Ink Spectra 6 (E6) technology, featuring high contrast and high color saturation. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing