esp32 development board

ESP32-P4-WIFI6(without Pre-soldered Header), the ESP32-P4 Board only. High-performance MCU with RISC-V 32-bit dual-core and single-core processors. 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP Static RAM, 8 KB TCM Powerful image and voice processing capability. Provides image and voice processing interfaces including JPEG Codec, Pixel Processing Accelerator, Image Signal Processor, H264 encoder 32MB PStatic RAM in the chip's package, with onboard 32MB Nor Flash. Adtaping 2*20 GPIO headers with 27 x remaining programmable GPIOs Commonly used peripherals such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO 3.0 TF card slot, microphone, and speaker header, etc. Security features: Secure Boot, Flash Encryption, cryptographic accelerators, and TRNG. Additionally, hardware access protection mechanisms help to enable Access Permission Management and Privilege Separation

Ausgestattet mit Hochleistungs-Xtensa 32-Bit LX7 Dual-Core-Prozessor, bis zu 240 MHz Hauptfrequenz Integriertes 512 KB SRAM und 384 KB ROM, mit integriertem 16 MB Flash und 8 MB PSRAM Integriertes 1,8-Zoll-LCD-Display, 360 × 360 Auflösung, 262 K Farbe Unterstützt kapazitive Touch-Steuerung über I2C-Schnittstelle, mit Interrupt-Unterstützung Onboard-Audio-Decoder, Mikrofon, RTC-Sensor, TF-Kartensteckplatz und Batterie-Lademanagementmodul usw.

ESP32-S3 ETH Development Board with PoE Function,Supports Wi-Fi, Bluetooth, and Ethernet communication, Onboard TF card slot, camera interface and Pico-compatible header ESP32-S3 Designed for AIoT applications.Powered by Xtensa 32-bit LX7 dual-core processor with frequency up to 240 MHz.Powerful AI Computing Capability & Reliable security features WIFI and BLE 5 support.ESP32-S3 integrates 2.4 GHz Wi-Fi (802.11 b/g/n) with 40 MHz of bandwidth support.Its Bluetooth Low Energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh Two power supply methods.Supports both PoE and USB Type-C power supply for PoE Module, Supports PoE Power Supply.Supports OV2640 / 0V5640 and other mainstream cameras

Adopts ESP32-S3R2 chip with high-performance Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz Built in 512KB S-RAM, 384KB ROM, 2MB of PS-RAM, and 16MB Flash memory. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, featuring superior RF performance Equipped with the A7670E-FASE cellular module, supports 4G Cat-1/2G networking, GNSS positioning, telephone calls, SMS, and other functions. Onboard USB switching IC and DIP switch for switching to use the USB interface of A7670E, suitable for connecting with PC for dial-up internet or debugging of A7670E module Onboard batt charging, solar charging, power management, batt capacity measurement, and related protection circuits, supports USB and solar charging with real-time batt capacity measurement. Onboard batt holder (batt is NOT included), adapting VBAT pin header for connecting to external 3.7V batt, with anti-reverse protection Rich peripheral interfaces such as camera interface, TF card slot, USB port, 38PIN header, etc., easy to expand and achieve various functions. Onboard multiple DIP switches for camera on/off, switching USB channels to avoid interface conflict, and setting power on/off for some circuits to reduce power consumption

Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use. Onboard 2inch LCD display for clear color picture display, 240 x 320 resolution, 262K color Built-in ST7789T3 display driver, using SPI communication, effectively saving the IO resources. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope). Onboard 3.7V MX1.25 Lithium batt recharge/discharge header Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use. Onboard TF card slot for external TF card storage of pictures or files Adapting 22 x GPIO pins for flexible configuration of pin function. Onboard camera interface, compatible with mainstream cameras such as OV2640(NOT Included) and OV5640(NOT Included) for image and video acquisition

ESP32-P4-WIFI6-M(with Pre-soldered Header), the ESP32-P4 Board only. High-performance MCU with RISC-V 32-bit dual-core and single-core processors. 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP Static RAM, 8 KB TCM Powerful image and voice processing capability. Provides image and voice processing interfaces including JPEG Codec, Pixel Processing Accelerator, Image Signal Processor, H264 encoder 32MB PStatic RAM in the chip's package, with onboard 32MB Nor Flash. Adtaping 2*20 GPIO headers with 27 x remaining programmable GPIOs Commonly used peripherals such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO 3.0 TF card slot, microphone, and speaker header, etc. Security features: Secure Boot, Flash Encryption, cryptographic accelerators, and TRNG. Additionally, hardware access protection mechanisms help to enable Access Permission Management and Privilege Separation

ESP32-S3-CAM-GC2145, with GC2145 camera. ESP32-S3 AI Camera Development Board An AI development board based on the ESP32-S3, integrating camera interface (DVP), SPI / QSPI display interface, and audio capture and playback functions It combines low cost, high performance, and low power consumption to meet the development needs of diverse intelligent terminal applications It allows access to online large model platforms such as Doubao and DeepSeek to support more AI application scenarios, enabling human-machine interaction functions such as voice interaction and question answering recognition Simultaneously provides Edge Impulse object detection demo, supporting real-time and multi-object detection, making it suitable for rapid development of products such as AI speech interaction, edge vision detection, HMI display applications, and smart cameras

USB-Treiber-Chip: CH340C, mit guter Systemkompatibilität, höherer Download-Geschwindigkeit und mehr Stabilität.2.4GHz Dual Mode WiFi+Bluetooth Development Board, mit Typ-c Schnittstelle . DUBEUYEW ESP32: sicher, zuverlässig und skalierbar für eine Vielzahl von Anwendungen. Das ESP-WROOM-32 ist ein vielseitiges Wi-Fi + BT + BLE MCU-Modul, das leistungsstark und vielseitig ist. Unterstützt 3 Modi: AP, STA, und AP+STA .Der 2.4GHz Wi-Fi plus Bluetooth Dual-Mode Chip ist zuverlässig, skalierbar und anpassungsfähig. Zwei CPU-Kerne können individuell gesteuert oder eingeschaltet werden. Breakout Board für 30PIN ESP32: Speziell entwickelt vom technischen Team von DUBEUYEW. Es ist voll kompatibel mit der 30-Pin-Version des ESP32-Entwicklungsboards. Dieses Breakout-Board kann einen GPIO-Pin des esp32-Entwicklungsboards auf zwei erweitern, was für Benutzer bequem ist, um alle Pins in Smart Home-Projekten wiederzuverwenden. Schöne Breadboard-Alternative. Das Typ-C-Kabel: mehr Komfort für Ihre DIY-Entwicklung

Ausgestattet mit Hochleistungs-Xtensa 32-Bit LX7 Dual-Core-Prozessor, bis zu 240 MHz Hauptfrequenz Integriertes 512 KB SRAM und 384 KB ROM, mit integriertem 16 MB Flash und 8 MB PSRAM Integriertes 1,8-Zoll-LCD-Display, 360 × 360 Auflösung, 262 K Farbe Unterstützt kapazitive Touch-Steuerung über I2C-Schnittstelle, mit Interrupt-Unterstützung Onboard-Audio-Decoder, Mikrofon, RTC-Sensor, TF-Kartensteckplatz und Batterie-Lademanagementmodul usw.

Compact and Clear Touch Display: The board features a 1.69-inch IPS LCD with a resolution of 240×280, providing vibrant and clear visuals. The capacitive touch interface ensures smooth, responsive touch control for a seamless user experience. Built-in Wi-Fi 6 and BT 5.0: With support for Wi-Fi 6, BT 5.0, and IEEE 802.15.4 (Zigbee and Thread), this board offers advanced and reliable wireless connectivity options, making it ideal for Internet of Things (IoT) and smart device applications. Powerful ESP32-C6 Chip: The board is powered by the ESP32-C6 chip, which integrates a RISC-V core, providing efficient processing power for handling complex tasks, AI applications, and multi-tasking operations with ease. Comprehensive Sensor Support: Equipped with the QMI8658 6-axis IMU sensor and the PCF85063 real-time clock chip, this board supports motion detection, precise time management, and enables real-time data processing for embedded applications. Versatile and Portable: Designed for flexibility, the ESP32-C6 1.69-inch LCD development board is perfect for various embedded projects, including wearable devices, robotics, and AI applications. With its integrated lithium batt charging support, it ensures portability and continuous operation. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

ESP32-P4-POE-ETH Development Board,High-performance Development Board Based On ESP32-P4,Rich Human-machine Interfaces Highly integrated and powerful performance.Adopts ESP32-P4 Module, onboard 32MB Nor Flash Two power supply methods.Supports USB Type-C power supply.With PoE Module, Supports PoE Power Supply Supports AI Speech Interaction.Allows access to online large model platforms such as DeepSeek, Doubao, etc. It provides a rich set of human-machine interaction interfaces, including MIPI-CSI (integrated image signal processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, TWAI, etc.

ESP32-S3-LCD-1.85 is a microcontroller development board with 2.4GHz WiFi and BT BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 1.85inch LCD display which can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.Onboard audio decoder, Microphone, QMI8658 6-axis sensor, RTC sensor, TF card slot and batt recharge management module, etc Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Adapting UART, I2C and some IO interfaces Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 1.85inch LCD display, 360×360 resolution, 262K color Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

Compact and Clear Display: The board features a 1.69-inch IPS LCD with a resolution of 240×280, providing vibrant and clear visuals. Built-in Wi-Fi 6 and BT 5.0: With support for Wi-Fi 6, BT 5.0, and IEEE 802.15.4 (Zigbee and Thread), this board offers advanced and reliable wireless connectivity options, making it ideal for Internet of Things (IoT) and smart device applications. Powerful ESP32-C6 Chip: The board is powered by the ESP32-C6 chip, which integrates a RISC-V core, providing efficient processing power for handling complex tasks, AI applications, and multi-tasking operations with ease. Comprehensive Sensor Support: Equipped with the QMI8658 6-axis IMU sensor and the PCF85063 real-time clock chip, this board supports motion detection, precise time management, and enables real-time data processing for embedded applications. Versatile and Portable: Designed for flexibility, the ESP32-C6 1.69-inch LCD development board is perfect for various embedded projects, including wearable devices, robotics, and AI applications. With its integrated lithium batt charging support, it ensures portability and continuous operation. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

There are several options for this item, this option comes with a PoE module. For more package content details, please check the image 2 Adopts ESP32-S3R8 high-performance chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM and 16MB Flash memory. Integrated 2.4GHz Wi-Fi and Bluetooth 5 (LE) wireless communication, with an onboard antenna. Supports switching to use external antenna Onboard W5500 Ethernet chip for extending 10/100Mbps network port through SPI interface. Optional for PoE module to realize Power over Ethernet function (IEEE 802.3af-compliant) Onboard camera interface, compatible with OV2640, OV5640 and other mainstream cameras for image and video capture. Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use Onboard TF card slot for external TF card storage of pictures or files. Compatible with Pico header, onboard multiple peripheral interfaces, offering strong compatibility and expandability

ESP32-S3-LCD-1.3-C(with Case and Prism Cube), a low-cost, high-performance MCU board equipped with 240MHz dual-core processor. It is compact in size, with onboard 1.3inch 262K color LCD display, Lithium batt recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RGB LCD, and Wi-Fi / BT antenna, which makes it easy for you to develop and integrate it into products quickly. Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. comes with prism cube to enhance the optical display effect and greater expandability Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, keeps it up to date, easier to use. Onboard 1.3inch 240x240 pixels 262K display for clear and colorful pictures Built-in ST7789V2 display driver, using SPI communication, effectively saving the IO resources. Adapting 13PIN 2.54mm GPIO header for connecting peripherals and debugging, supports flexible configuration of pin functions Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures and other applications. Onboard 3.7V MX1.25 lithium batt recharge / discharge header

Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna Type-C connector, keeps it up to date, easier to use. Onboard 1.69inch 240X280 pixels 262K capacitive touch display for clear color pictures. Built-in ST7789V2 display driver and CST816T capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip with reserved SH1.0 RTC batt header (supports charging) for RTC function requirement Onboard RST, BOOT and a programmable PWM button for easy custom function development. Onboard 3.7V MX1.25 lithium batt recharge/discharge header. High touch screen transmittance, fast response and long lifetime Reserved pads of 4 x GPIO, I2C, and UART interface, for connecting peripherals and debugging. Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios

ESP32-C6-LCD-1.47 is a microcontroller development board with 2.4GHz W-i-F--i 6 and Blue-too--th BLE 5 support, integrates 4MB Flash. Onboard 1.47inch LCD screen (172×320 resolution, 262K color) can smoothly run GUI programs such as LVGL Equipped with a high-performance 32-bit RISC-V processor with clock speed up to 160 MHz, and a low-power 32-bit RISC-V processor with clock speed up to 20MHz. Powerful AI Computing Capability & Reliable security features. Suitable for AIoT applications Supports 2.4GHz W-i-F--i 6 (802.11 b/g/n) and Blue-too--th 5 (LE), with onboard antenna. Built in 320KB ROM, 512KB of HP SRAM, 16KB LP SRAM and 4MB Flash memory Adapting multiple IO interfaces, integrates full-speed USB port. Onboard TF card slot for external TF card storage of pictures or files Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios. Built-in RGB LED with clear acrylic sandwich panel for cool lighting effect

ESP32-C5 Dual-Band Wi-Fi 6 Development Board Onboard ESP32-C5-WROOM-1 Series Module.Supports ESP-IDF, Arduino IDE, etc. Supports ESP-IDF, Arduino IDE.Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started Based on ESP32-C5 chip.The ESP32-C5 is a Multi-protocol RISC-V MCU, supports dual-band Wi-Fi 6, Bluetooth (LE), and Zigbee / Thread, specifically designed for IoT applications requiring efficient wireless transmission Supports dual-band Wi-Fi 6 / BLE 5 / Thread / Zigbee.Integrated 2.4GHz and 5GHz dual-band Wi-Fi, Bluetooth 5 (LE), and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communications, with outstanding RF performance

The ESP32-S3-RLCD-4.2-EN(without Batt) is a RLCD AIoT development board based on ESP32-S3, supporting Wi-Fi and BLE dual-mode communication. Onboard 4.2inch RLCD with low power consumption, e-paper-like display experience, and faster refresh response. Integrated with audio codec circuit, dual microphones, speaker, SHTC3 high-precision temperature and humidity sensor, TF card slot, RTC header, and Li Batt charging and discharging management circuit, etc. Reserved USB, UART, I2C, and multiple GPIO interfaces for easy expansion. Supports AI Voice Interaction, temperature and humidity monitoring, and IoT control, making it suitable for DIY desktop smart ornaments, electronic calendars, AI smart devices, and other applications. Also ideal for product prototyping Adopts high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi and BT 5 (LE), with onboard antenna. Built-in 512KB Static RAM, 384KB ROM, with integrated 16MB Flash and 8MB PStatic RAM. Onboard 4.2inch RLCD, 300x400 resolution, features reflective imaging and no backlight required Equipped with a dual-microphone array, enabling audio algorithms such as noise reduction and echo cancellation, suitable for accurate voice recognition and near-field / far-field voice wake-up applications. Onboard PCF85063 RTC chip and SHTC3 temperature & humidity sensor for accurate RTC management and environmental monitoring Onboard Li Batt holder and RTC backup Batt header. The RTC backup batt header supports a rechargeable RTC batt and dual modes of main Batt power supply and RTC independent power supply. Onboard TF card slot for external storage of images or files. Onboard programmable KEY and BOOT side buttons for customized function development. Reserved 2x8PIN 2.54mm pitch female header for convenient external expansion

Powerful and Compact Design: This entry-level RISC-V microcontroller development board integrates WiFi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread), offering a compact yet powerful solution for various applications such as smart homes, industrial automation, healthcare, and consumer electronics. High-Performance ESP32-C6-WROOM-1-NX Module: Equipped with a RISC-V 32-bit single-core processor running at up to 160MHz, this board features a built-in 8MB/16MB Flash, ensuring robust performance for a wide range of projects and applications. Multiple Peripheral Interfaces and USB Support: The development board integrates SPI, UART, I2C, I2S, LED PWM, SDIO, and other interfaces. It also includes onboard CH343 and CH334 USB HUB chips, allowing simultaneous USB and UART development via a USB-C port for enhanced flexibility. Easy Integration and Expansion: The board is compatible with the pinout of the ESP32-C6-DevKitC-1 development board, offering seamless integration and expansion with additional peripheral modules, making it convenient for developers to scale their projects. Comprehensive Development Support: With online examples and tutorials for the ESP-IDF development environment, this board is designed to help you quickly get started and implement your ideas in real-world products. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.

Adopts high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna Built-in 512KB Static RAM, 384KB ROM, with integrated 8MB Flash and 8MB PSRAM.Onboard 1.54inch e-paper display, 200 × 200 resolution, features high contrast and wide viewing angle Onboard audio codec chip, supports voice capture and playback, enabling AI voice interaction applications. Onboard PCF85063 RTC chip and SHTC3 temperature & humidity sensor for accurate RTC management and environmental monitoring Onboard TF card slot for external storage of images or files. Onboard programmable PWR and BOOT side buttons for customized function development Reserved 2 × 6 2.54mm pitch pin header for convenient external expansion. Equipped with the FT6336 capacitive touch IC, enabling touch data transmission via the I2C communication interface, effectively reducing GPIO resource consumption and improving system resource utilization and expansion flexibility

The ESP32-S3-Pico is a compact-size microcontroller development board with multiple digital interfaces. Supports Development Environments Such as ESP-IDF/MicroPython, etc Tiny Size & Easy integration. Type-C connector, easier to use. 27 x multi-function GPIO pins. Castellated module allows soldering directly to carrier boards Adopts ESP32-S3R2 chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 512KB SRAM, 384KB ROM, 2MB psram, 16MB Flash memory Integrated 2.4GHz Wi-Fi, with superior RF performance. Onboard CH343 and CH334 chips can meet the needs of USB and UART development via a Type-C interface Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip with load current up to 2A. Supports Raspberry Pi Pico expansion board ecology, suitable for artificial intelligence IoT application development

Dieses ESP32-Modul hat 38 Pins, darunter UART, I2C, SPI, DAC, ADC (12-Bit), und alle GPIO-Pins können als Eingänge oder Ausgänge verwendet werden, was mehr Entwicklungsmöglichkeiten bietet. Das ESP32 WROOM Entwicklungsboard verfügt über 2,4 GHz WIFI und Bluetooth. Er verwendet die 40nm Low-Power-Technologie. Es erfüllt den Bedarf an stromsparender Kommunikation. Das ESP32 Entwicklungsboard integriert zwei Tensilica LX6 Core CPUs (getaktet mit bis zu 240 MHz) und 512 Kilobyte SRAM. Sie können das ESP32-Entwicklungsboard mit Hilfe eines Lua-Skripts oder der Arduino-IDE entwerfen und entwickeln, einfach zu bedienen. Professionelle Mikrocontroller-Ingenieure zu Ihren Diensten, wenn Sie irgendwelche Probleme in den Prozess der Nutzung haben, kontaktieren Sie uns bitte über Amazon.

ESP32-S3-LCD-1.3-B(with Case, without Prism Cube), a low-cost, high-performance MCU board equipped with 240MHz dual-core processor. It is compact in size, with onboard 1.3inch 262K color LCD display, Lithium batt recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RGB LCD, and Wi-Fi / BT antenna, which makes it easy for you to develop and integrate it into products quickly. Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, keeps it up to date, easier to use. Onboard 1.3inch 240x240 pixels 262K display for clear and colorful pictures Built-in ST7789V2 display driver, using SPI communication, effectively saving the IO resources. Adapting 13PIN 2.54mm GPIO header for connecting peripherals and debugging, supports flexible configuration of pin functions Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures and other applications. Onboard 3.7V MX1.25 lithium batt recharge / discharge header

【Hochleistungs-MCU】Adoptiert ESP32-S3R8-Modul mit Xtensa 32-Bit LX7 Dual-Core-Prozessor, bis zu 240 MHz Hauptfrequenz Speicherressourcen: Integriertes 512 KB SRAM, 384 KB ROM, 8 MB PSRAM und externer 16 MB Flash-Speicher Sprachinteraktion: Dual-Mikrofonarray mit Rauschunterdrückung und Echounterdrückung, geeignet für genaue Spracherkennung und Nah-/Fernfeld-Aufwachen Clock Management: Integrierter PCF85063 RTC-Chip, unterstützt Ausschaltzeiterhaltung für Alarm-, geplante Aufgaben und Weckfunktionen Bunte Lichteffekte: 7 integrierte Surround-RGB-LEDs, programmierbar für eine Vielzahl von dynamischen Effekten

ESP32-C6-LCD-1.3, Standard version(without header) ESP32-C6 Suitable For AIoT Applications: Equipped With A High-Performance 32-Bit RISC-V Processor And A Low-Power 32-Bit RISC-V Processor Wi-Fi 6 And BLE 5 Support: Supports Wi-Fi 6, BT 5 And IEEE 802.15.4 (Zigbee 3.0 And Thread). Its BT Low Energy Subsystem Supports BT 5 (LE) And BT Mesh Supports ESP-IDF: Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

ESP32-S3 1.54inch e-Paper AIoT Development Board.Supports AI speech interaction, temperature and humidity monitoring, and DIY creative function, etc. Onboard audio codec chip.Supports high-quality audio processing, providing clear and high-quality audio input and output Supports AI Speech Interaction.Allows access to online large model platforms such as DeepSeek, Doubao, etc Application Scenarios.Suitable for Voice Interaction and e-Reader, etc Supports ESP-IDF, Arduino IDE.Comprehensive SDK, dev resources, and tutorials to help you easily get started

1.8inch Capacitive Touchscreen: The board features a 1.8-inch capacitive touchscreen with excellent touch sensitivity, offering a responsive display for a variety of interactive applications. ESP32-S3 Chip: Powered by the ESP32-S3, the board delivers high-performance dual-core processing capabilities with built-in hardware support for AI and machine learning tasks. Dual Wireless Connectivity: Supports both Wi-Fi and Bluetooth 5.0, enabling seamless communication with other devices for Internet of Things (IoT) and remote control applications. Audio and Voice Integration: Equipped with an audio decoder and microphone, this board allows integration of voice recognition and audio playback, making it suitable for smart audio applications. Flexible Power Supply: The board can be powered via USB Type-C or a 3.7V BAT, providing flexibility for portable or stationary projects. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information., Hersteller: Waveshare

ESP32-C6-LCD-1.3-M, With black pre-soldered header ESP32-C6 Suitable For AIoT Applications: Equipped With A High-Performance 32-Bit RISC-V Processor And A Low-Power 32-Bit RISC-V Processor Wi-Fi 6 And BLE 5 Support: Supports Wi-Fi 6, BT 5 And IEEE 802.15.4 (Zigbee 3.0 And Thread). Its BT Low Energy Subsystem Supports BT 5 (LE) And BT Mesh Supports ESP-IDF: Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

[Standalone-Betrieb] Genießen Sie eigenständige Funktionalität ohne externen Computer; verbinden Sie sich einfach mit WLAN und starten Sie mit dem 987KH/S Miner. Optimierter Algorithmus: Entwickelt mit modernster Firmware, die die Hashrate auf 987 km/h maximiert und die Gewinnchancen drastisch um 1700 % erhöht. [Eingebettetes Design] Entwickelt für Effizienz, mit geringem Wartungsaufwand, hoher Zuverlässigkeit und reduziertem Stromverbrauch für langfristige Nutzung. [Bergbau-Flexibilität] Egal, ob Sie unabhängige Bergbau- oder Pooling-Ressourcen bevorzugen, dieses Gerät passt sich nahtlos Ihrer Bergbaustrategie an. [Größenerinnerung] zur Überprüfung Ihrer Spezifikationen anhand der Produktdetails für eine optimale Leistung.