raspberry zero 2

Motor Servo Driver HAT is an module of DC motor and servo driver specifically designed for Raspberry Pi. It is added power chip to prevent multiple connected devices from affecting RPI This motor driver features a separate power switch. After power on, the POWER needs to be turned to the ON position. Additionally, all the address lines of I2C are led out, and the address can be set by means of the DIP switch. The demo codes we provide are set the address to 0X7F The motor driver module can drive 2 channels of DC motors and 6 channels of servos simultaneously, which is also suitable for study and research to drive DIY robots The motor driver module can drive 2 channels of DC motors and 6 channels of servos simultaneously Onboard PCA9685 chip, adopting I2C communication, built-in PWM driver and a clock, no need to continuously send signals to occupy the resources of the micro-controller

Passendes Acryl Gehäuse für Raspberry Pi Zero. alle Anschlüsse sind frei zugänglich Speicherkarte lässt sich im eingebauten Zustand wechseln Gehäuseausschnitt für Prozessorkühler einfache Montage Passend für: Raspberry Pi Zero W Raspberry Pi Zero WH Raspberry Pi Zero 2 W Raspberry Pi Zero 2 WH Bitte beachten Sie, vor der Montage alle Schutzfolien von den Gehäuseteilen zu entfernen, damit das Gehäuse in vollem Glanz erstrahlt. Hinweis: Der Raspberry Pi Zero ist nicht im Lieferumfang enthalten!

Provide online user manual, please check the manual carefully before using! Supports Raspbian, 10-points touch, driver free. Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Supports Retropie, driver free 12.3-inch IPS screen, 1920×720 HD resolution, 600cd/m² brightness. 10-point capacitive touch control, tempered glass capacitive touch panel, hardness up to 6H Supports Raspberry Pi OS/Ubuntu/Kali and Retropie when used with Raspberry Pi. When used as a computer monitor, it supports Windows 11/10/8.1/8/7 When used with Tinker Board 2, it supports Android / Debian. When used with Jetson Nano, Ubuntu is supported Support multi-language OSD menu (can be used for power control, adjusting brightness/contrast, etc.). With 3.5mm audio and 4PIN speaker interface, it also supports HDMI audio output

8inch 768x1024 LCD, IPS display panel with 178° wide viewing angle, up to 6H hardness toughened glass panel Up to capacitive 10-Point Touch(depending on the operating system). Supports Backlight Adjustment Via Software When used for Raspberry Pi, compatible with Raspberry Pi OS, 10-point touch, driver free; compatible with Ubuntu/Kali/WIN10 IoT, single point touch, driver free; compatible with Retropie, driver free When used for Jetson Series Board, compatible with Ubuntu, single point touch, driver free When used for PC, compatible with Windows 11 / 10 / 8.1 / 8 / 7, 10-point touch, driver free

RS485 CAN HAT Compatible with Raspberry Pi 5/4B/3B+/3B/Zero/Zero W/WH/Zero 2W,etc. Expand CAN and RS485 functions. CAN: onboard CAN controller MCP2515 via SPI interface, with transceiver SIT65HVD230DR; RS485: controlled via UART, half-duplex communication, onboard transceiver SP3485. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, light-ning proof & anti-electrostatic. Onboard 120Ω terminal resistor for RS485 and CAN interfaces, enabled via DIP switch. Reserved control header, allows working with other control boards. Comes with Online Development Resources /User Manual, please follow there: bit.ly/3mC64mA

Note:Version 4 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+, Jetson Nano Ultra low power consumption, basically power is only required for refreshing; SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. No backlight, keeps displaying last content for a long time even when power down;Onboard voltage translator, compatible with 3.3V/5V MCUs

[Breite Kompatibilität] Unterstützt DMR, D-Star, YSF, P25, NXDN und POCSAG, ermöglicht eine nahtlose digitale Zwei-Wege-Funkkommunikation (YSF2DMR / YSF2NXDN / YSF2P25 / DMR2YSF / DMR2NXDN). Funktioniert in UHF 430-450 MHz Bändern für zuverlässige Konnektivität. [Verbesserte Hardware] Kommt mit Raspberry Pi Modell 2B für verbesserte Leistung, mit kabelgebundener Ethernet-Konnektivität und einem WiFi-Modul für kabellosen Netzwerkzugriff. Einfache Netzwerkeinrichtung: Unterstützt sowohl WLAN als auch direkte kabelgebundene Verbindung zu einem Router. Für die erstmalige Einrichtung verbinden Sie sich einfach über Netzwerkkabel, dann konfigurieren Sie WLAN über die Webschnittstelle für ein müheloses Erlebnis. [Vielseitige Stromversorgung] Stromversorgung über DC 5 V USB, wodurch es kompatibel mit mobilen Ladegeräten, Powerbanks und direkten USB-Anschlüssen von Computern oder Laptops ist. [Zuverlässiger Kundensupport] Wir bieten engagierten Kundenservice und antworten auf Anfragen innerhalb von 6 Stunden. Zögern Sie nicht, uns für Hilfe zu kontaktieren!

Die PoE-ETH-USB-HUB-BOX ist ein HUB-Kit mit PoE/ETH/USB HUB HAT im Inneren. Es ist auf Raspberry Pi Zero Serie zugeschnitten, klein in der Größe, jeder Ausschnitt des Gehäuses ist genau mit dem Stecker ausgerichtet. Das Gehäuse nimmt klassische Raspberry Pi Rot / Weiß Farbkombination, mit hochwertiger stumpfer Polieroberfläche, die die Zero effektiv von Staub fernhält. Durch die Verwendung dieser kleinen HUB BOX und einiger geeigneter 802.3af-konformer Strombeschaffungsgeräte ist es möglich, sowohl eine Netzwerkverbindung als auch die Stromversorgung für Ihren Raspberry Pi Zero in nur einem Ethernet-Kabel zusammen mit 3x erweiterten USB-Ports bereitzustellen.Designt für Raspberry Pi Zero, kompatibel mit Boards der Zero-SerieIncorporates RTL8152B Ethernet-Chip, mit 10M / 100M Auto-Negotiation RJ45-PortPoE-Funktion (Power over Ethernet), 802.3af-konformGetrennte isolierte SMPS (Switch Mode Power Supply)3x erweiterte USB-Anschlüsse, kompatibel mit USB 2.0 / 1.1Gewirr abgerundetes Design, glattes Handgefühl, "simple snap" Kofferde

Das TFT-Touchscreen-Modul nutzt die Größe des Raspberry Pi mit einer Diagonalen von 3,5" bzw. knapp 8,9cm ideal aus. Auf dem TFT befindet sich ein resistives Touchpanel, das per Finger oder auch beigelegtem Stylus bedient werden kann. Ein 2x13-poliger Anschluss ermöglicht den Betrieb an allen Raspberry Pis: Raspbery Pi 1/2/3/4 und Pi Zero Kein Blockieren der Display-Anschlüsse durch Verwendung der SPI-Schnittstelle. Der HDMI-Anschluss bleibt frei. Als Treiberchip kommt ein ILI9486 zum Einsatz. Abmessung des Panels mit Buchsenleiste: ca. 86 mm x 56 mm x 20 mm

✅ Uninterruptible Power Supply (UPS) for Pi Zero — Provides seamless UPS power switching so your Rasp-berry Pi Zero keeps running during power interruptions using the onboard power-path charging circuit. ✅ 3-Port USB 2.0 Expansion — Built-in 3-port USB 2.0 hub expands connectivity for keyboards, flash drives, Wi-enabled dongles and other peripherals while maintaining compact Pi Zero form factor. ✅ 18650 Ba-ttery Holder & Safe Charging — Onboard 18650 ba-ttery holder and external ba-ttery connector support flexible power options; integrated charge management handles charge/discharge switching automatically. ✅ Real-time Ba-ttery Monitoring & Indicators — Includes ba-ttery monitoring chip, boost regulator and LED indicators to display charge status and ba-ttery level; monitor voltage, current and operating state at a glance. ✅ Mode Switch & Protection Features — Physical switch lets you select Normal USB HUB or Pi Zero USB HUB mode; protection circuits (reverse-polarity and power-path management) enhance safety and reliability.

Passendes Acryl Gehäuse für Raspberry Pi Zero. alle Anschlüsse sind frei zugänglich Speicherkarte lässt sich im eingebauten Zustand wechseln transparente Ober- und Unterseite einfache Montage Passend für: Raspberry Pi Zero v1.1 Raspberry Pi Zero v1.3 Raspberry Pi Zero W Raspberry Pi Zero WH Raspberry Pi Zero 2 W Raspberry Pi Zero 2 WH Bitte beachten Sie, vor der Montage alle Schutzfolien von den Gehäuseteilen zu entfernen, damit das Gehäuse in vollem Glanz erstrahlt. Hinweis: Der Raspberry Pi Zero ist nicht im Lieferumfang enthalten!

Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc. Bluetooth 3.0, supports data transferring through Bluetooth UART interface, for connecting host control boards like Arduino/STM32 Onboard voltage level translator, 3.3V by default, switch to 5V via jumper

This is an IPS LCD display HAT Compatible with Raspberry Pi, 1.3inch diagonal, 240x240 pixels, with embedded controller, communicating via SPI interface. Trying to add a control interface for your Pi? This compact display would be the ideal choice. IPS screen, wide viewing angle, better display. High definition in small size. 1x joystick, 3x pushbuttons, handy and useful. Driver: ST7789. Interface: SPI. Display color: RGB, 65K color. Backlight: LED. Operating voltage: 3.3V. Comes with Online resources and tutorials to help you get started quickly: bit.ly/3gcUJWw

15.6inch Monitor With Stand, Thin And Light Design, IPS Screen, 1920 × 1080 Full HD.Support HDR, No Touch.100% SRGB Covers More Gamut Area Of Red, Green And Blue.Designer-Professional-Grade Color Gamut. Support Raspberry Pi OS/Ubuntu/Kali and Retropie when working with Raspberry Pi. Support Windows 11/10/8.1/8/7 when working as the computer monitor. Support OSD menu (can be used for power control, adjusting brightness/contrast, etc.) Support access to USB devices such as mouse and keyboard (with Type-C OTG expansion interface). Support Type-C/HDMI audio input, with a 3.5mm headphone jack. Built-in ferrite Hi-Fi speakers (no external speakers required). Support Audio And Video Transmission, Plug And Play,Instantly Zoom In The Smartphone Screen (For Supported Mobile Phone Models, Please Contact Customer Service). Computer Dual Screen For Collaborative Processing,One Screen For Work, One Screen For Entertainment, Without Interfering With Each Other. IPS Panel Enhances The Display And Color Performance Of The Monitor.170° Wide Viewing Angle, Whether It Is Viewed Vertically Or Horizontally.The Display Effect Is Still Clear. Natural Color Transition, Matte Screen Design, Reducing Ambient Light Interference.Catching Every Splendid Detail. With multiple craftsmanship, the aluminum alloy body is made with ingenuity, showing a fashionable appearance. The body is as light as 1.18kg and as thin as 5.5mm, so you can carry it with one hand and go. Metal Stand, Sturdy And Durable, With Non-Slip Rubber Pad At The Bottom Of The Screen, Stable To Use.

480x320 hardware resolution, software configurable up to 1920x1080;Resistive touch control IPS technology, high quality and perfect displaying from very wide viewing angle; Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie); Supports FBCP software driver as well, allows to config software resolution and set up dual-display Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required; HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) Multi-languages OSD menu, for power management, brightness adjustment, contrast adjustment, etc.; Supports 100-level backlight adjustment; Supports HDMI audio output

Passendes Gehäuse für Raspberry Pi Zero . Aufdruck der GPIO-Funktionen auf der Oberseite . alle Anschlüsse sind frei zugänglich . Speicherkarte lässt sich im eingebauten Zustand wechseln . sichere Montage des Raspberry Pi Zero durch mitgelieferte Schrauben . Farbe: transparent . Maße: ca. 72 x 34 x 17 mm Passend für . Raspberry Pi Zero v1.1 . Raspberry Pi Zero v1.3 . Raspberry Pi Zero W . Raspberry Pi Zero WH . Raspberry Pi Zero 2 W . Raspberry Pi Zero 2 WH Lieferung ohne Raspberry Pi

Adopts Servo Driver HAT:Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+.I2C controlled, using only 2 pins. Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales). Integrates 5V regulator, up to 3A output current, can be powered from batt through VIN terminal. Standard servo interface, supports common used servo. Reserved I2C control pins, allows to work with other control boards. The Robot Arm Structure:4-DOF, large solid base, metal mechanical grasper. Full aluminium alloy body, sandblasting oxidation surface, strong & durable. Clever mechanical structure and mounting design, agile to control, easy to build. Fitted with 4x metal gear servos, large torque force, smooth moving.

Schlichtes, passendes Gehäuse "Candy Bar" für Raspberry Pi Zero. alle Anschlüsse sind frei zugänglich Speicherkarte lässt sich im eingebauten Zustand wechseln inklusive Schrauben einfache Montage Passend für: Raspberry Pi Zero v1.1 Raspberry Pi Zero v1.3 Raspberry Pi Zero W Raspberry Pi Zero WH Raspberry Pi Zero 2 W Raspberry Pi Zero 2 WH Hinweis: Der Raspberry Pi Zero ist nicht im Lieferumfang enthalten!

This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. No backlight, keeps displaying last content for a long time even when power down.Onboard 4x Keys Ultra low power consumption, basically power is only required for refreshing.Onboard voltage translator, compatible with 3.3V/5V MCUs Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano。Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Compatible with Raspberry Pi: Based on RPi 40PIN GPIO header, compatible with Raspberry Pi series boards (Pi 5/4B/3B+/3B/Pi Zero W/Zero 2W/Pico W/Pico 2W, etc.) PCM5122 Audio Chip: Adopts PCM5122 professional stereo DAC chip, controlled through I2C, with audio transmitted via I2S interface. Onboard Headphone Jack & RCA Connector: Onboard standard 3.5mm headphone jack, supports audio playback via external headphones, and features RCA connector for connecting external speaker. Onboard EEPROM Chip: Used for automatic driver loading in RPi OS. High Sampling Rate & Resolution: Supports sampling frequency up to 384kHz. Supports up to 32-bit resolution audio data.

This is a Ethernet / USB HUB HAT for various versions of the Raspberry Pi, including Raspberry Pi 3 Model B+/ B, 2 Model B,and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH. The Raspberry Pi hub HAT provides more USB capability to your Pi, plus a RJ45 Ethernet port, which is great when you need a stable wired Ethernet connection. 3x USB ports, compatible with USB2.0/1.1 1x RJ45 10/100M port, based on the RTL8152B Ethernet chip Onboard multi indicators, for monitoring the status of power, Ethernet, and each USB port

PCM5122 HIFI I2S DAC Audio Board, Based On RPi 40PIN GPIO Header, compatible with Raspberry Pi 5/4B/3B+/3B/Pi Zero W/Zero 2W/Pico W/Pico 2W, etc. Adopts PCM5122 professional stereo DAC chip, controlled through I2C, with audio transmitted via I2S interface. Onboard standard 3.5mm headphone jack, supports audio playback via external headphones. Built-in RCA connector for use with speaker and other devices in a variety of scenarios. Supports sampling frequency up to 384kHz. Supports up to 32-bit resolution audio data. Comes with Online Tutorial Usage Guide and Online Development Resource, Please check: n9.cl/ybcp9a

Verbessertes Audio-Erlebnis: Ausgestattet mit zwei Lautsprechern und integrierten OSD-Menüs für Bildschirm-/Tonparameter-Anpassungen, wird unser Mini-HDMI-Monitor Ihr audio-visuelles Erlebnis zum Leben erwecken. Das mitgelieferte Metallständer-Set bietet Ihnen zusätzliche Unterstützung und Stabilität für DIY-Projekte und Hersteller Vielseitig einsetzbar: Kompatibel mit Mini-PC und PC. Einfacher Anschluss mit USB-C-Anschlüssen für Strom und HDMI für Signal Verwenden Sie es als Erweiterungsbildschirm für Ihren PC oder als Allzweck-HDMI-Touchscreen in Ihren Creator-Projekten: Gaming-Monitor, Bedienfelder, internes Display, Statistikanzeige, Sensor-Panel und mehr Lieferumfang: 1 x Touchscreen, 1 x HDMI-Mini-HDMI-Kabel, 2 x USB-Typ-C-Kabel, 1 x Halterungsset, 1 x Bedienungsanleitung (evtl. nicht in deutscher Sprache). HINWEIS Sie benötigen einen extra HDMI Adapter - Micro HDMI oder Micro HDMI - Mini HDMI Kabel für den Pi4 Anschluss

Kameraparameter: Die Kamera verfügt über einen 5MP OV5647 1080P Webcam Sensor mit einem hohen Pixel von 5 Megapixeln. Die Kamera unterstützt nicht nur die Aufnahme von statischen Bildern mit 2592 x 1944 Pixel, sondern auch die Aufnahme von Videos mit 1080p@30fps, 720p@60fps und 640 x 480p 60/90 Kompatibilität: Diese hochauflösende Videokamera ist kompatibel mit Raspberry Pi Modell B/B A RPi 4/ 3/ 2/ 1, kompatibel mit Raspberry Pi Zero/ ZeroW mit dem FPC Kabel CMOS Sensorschnittstelle: Das Kameramodul verwendet über den CSI Bus eine geeignete CMOS Sensorschnittstelle (CSI). Eine Verbindung mit höherer Bandbreite, die 5 Megapixel Daten von der Kamera zurück zum Prozessor überträgt Infrarot Fülllicht: Die Kamera ist mit 2 Infrarot Fülllichtern ausgestattet, um das Problem zu lösen, dass das Licht zu schwach ist, um nachts Fotos aufzunehmen. Die Helligkeit des Infrarotlichts passt sich automatisch an die Dunkelheit der Umstände an Fokuseinstellung: Die Brennweite der Kamera kann abhängig von der Entfernung des Aufnahmeobjekts angepasst werden. Dies ist hilfreich, um hochauflösende und schöne Bilder aufzunehmen. Bring Ihnen schöne Erfahrungen

Raspberry Pi Zero 2 W Board Included: The core of the Raspberry Pi Zero 2 W is the RP3A0. With a quad-core 64-bit ARM Cortex-A53 processor clocked at 1GHz and 512MB of SDRAM, Zero 2 W is up to five times as fast as the original Raspberry Pi Zero 4 Port OTG Hub: Supports 4 USB devices at the same time, such as keyboards, mice, and other USB devices Raspberry Pi Zero 2 W Aluminum Case: Made of Aluminum alloy, and Access to all ports of Raspberry Pi Zero 2 W 5V 3.6A Power Supply: This RoHS/FCC/CE-certified USB-C charger features multiple safety functions to protect your device from overvoltage, overheating, short circuits and more. The built-in smart chip provides comprehensive protection for your mobile device whilst charging. Includes a Type-C to Micro USB adapter for Raspberry Pi Zero 2 W 64GB SD Card: 64GB Class 10 card pre-loaded with Raspberry Pi OS (64-bit), works with Raspberry Pi Zero 2 W

2inch Capacitive Touch Display Module, IPS Display, 240×320 resolution, 262K colors, clear and colorful displaying effect. High touch screen transmittance, fast response and long lifetime. Embedded with ST7789T3 driver chip and CST816D capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins. Adapting 15PIN connector and 18PIN FPC slot for connecting the LCD module to the host board. Onboard voltage translator, compatible with 3.3V / 5V operating voltage. Compatible with Raspberry Pi 5/4B/3B+/3B/Pi Zero/Zero W/Pi Zero 2W/Pico/Pico W/Pico 2/Pico 2W/ ESP32/ Ardui Boards. Comes with Online Tutorial Usage Guide and Online Development Resource, Please check: n9.cl/8lo09l

The L76K GPS HAT is a Multi-GNSS (Global Navigation Satellite System) module, Compatible with Raspberry Pi 5/ 4B/3B+/3B/Zero W/Zero 2 W/Jetson / RDK series boards. Supports GPS, BeiDou (BDS), GLONASS and QZSS systems, allows multi-system combined or single-system independent positioning. Supports AGNSS function. Supports Augment systems. Augment system is aimed at improving the accuracy, integrity, reliability, and availability of positioning and navigation. Built-in Low-Noise Amplifier (LNA) for improved reception sensitivity. Built-in SAW Filter for enhanced noise reduction performance. UART communication baudrate: 4800~115200bps (9600bps by default). Onboard ba ttery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts. Application Scenarios: Vehicle tracking, asset tracking, security systems, industrial PDAs, GIS applications, etc. Comes with Online Development Resources and Tutorials to help you get started quickly: bit.ly/44Xwdjj

✅ UPS Power Backup for Pi Zero Projects — Designed for Rasp-berry Pi Zero series, this UPS expansion board keeps your system powered during outages, preventing unexpected shutdowns and data loss. ✅ 3-Port USB 2.0 Hub Expansion — Features three standard USB 2.0 ports, supporting simultaneous connection of keyboard, storage, and peripherals — perfect for extending Pi Zero functionality. ✅ Smart Charging Circuit with Power-Path Management — Equipped with an intelligent charging management IC, enabling seamless transition between external power and ba-ttery supply for true uninterrupted operation. ✅ 18650 Ba-ttery Holder with LED Indicators — Built-in 18650 ba-ttery holder and external connector offer flexible power options; LED indicators show charging, discharging, and power status clearly. ✅ Safety Protection & Easy Installation — Includes reverse-polarity protection, voltage boost, and selectable Normal / Pi Zero HUB mode via onboard switch. Compact and plug-and-play for any Pi Zero setup.

【Global Shutter】The Global Shutter Eliminates Jello-Effect While Shooting Fast Moving Objects, More Suitable For High Frame Rate Capturing 【For Raspberry Pi series boards】Direct Connect To the Pi Different Variants Including 4B/3B+/3A+/3B/2B/B+/A+, Extra FPC Cable Is Required For Zero / Zero 2 W Series 【Note】For reference only, RPi and yellow FPC are NOT included. When using with CM3/3+/4, extra adapter board required

2PCS Version-RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom. Adopts unique dual-core and dual-architecture design: dual-core arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz 520KB of Static Ram, and 4MB of on-board Flash memory. Type-C connector, keeps it up to date, easier to use. Castellated module allows soldering directly to carrier boards. USB 1.1 with device and host support Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. 29 x multi-function GPIO pins (20 x via edge pinout, others via solder points). 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 24 × controllable PWM channels Accurate clock and timer on-chip. Accelerated floating-point libraries on-chip. 12 × Programmable I/O (PIO) state machines for custom peripheral support Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.