stm32 development board

Typical application: Used for Medical and health, smart payment, public network intercom, environmental monitoring, energy monitoring, fleet management, smart industry, smart agriculture. With pre-soldered SMA main antenna connector and pin header, comes with SMA antenna. Applicable regions: Global Compatible with 2G/3G/4G network with global support. Supports dial-up, telephone calls, SMS/TCP/UDP/MQTT/DTMF/HTTP/FTP, etc. Supports GPS/BeiDou/Glonass/GALILEO/QZSS/LBS base station positioning. Onboard USB and UART interface, for dial-up Internet access, cloud platform communication, GNSS positioning, etc Castellated holes with immersion gold design, small size, easy to integrate into the device by soldering directly or inserting via the pin header. Adapting USB/UART/SIM card/GPIO control pins, easy to develop and debug, better expansibility. Built-in voltage translator, compatible with 3.3V/5V MCU motherboards such as STM32/ESP32 Supports multiple power supply methods: USB port, VIN pin, and VBAT pin (for 3.7V lithium batt). Supports 5~26V wide voltage power supply and 3A high current output, to prevent the module from dropping and restarting due to the large instantaneous power consumption, more stable and reliable in industrial use Onboard Nano SIM card slot, supports 1.8V and 3V SIM cards, near the edge of the board design, for easy accessing SIM card. Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32)

Embedded ST7789 Driver, Using SPI Bus 240×135 resolution, 65K RGB colors, clear and colorful displaying effect SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32 Comes with development resources (examples for Raspberry Pi/Arduino/STM32) Supports Controller Boards Like Raspberry Pi/Arduino/STM32 1.14inch LCD Display Module, IPS Screen, 65K RGB Colors, 240×135 Resolution, SPI Interface

The SIM800C GSM/GPRS HAT is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, with up to 85.6kbps GPRS data rate. It allows your Pi to easily send messages, connect to wireless Internet, and so on. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc. UART interface, for connecting host control boards. Onboard voltage level translator, 3.3V by default, switch to 5V via jumper. 2x LEDs for indicating the module operating status. SIM card slot for 1.8V/3V SIM card. Autobauding baudrate: 1200bps ~115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands). Supports SIM application toolkit: GSM 11.14 Release 99. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32).

2inch IPS LCD Main Screen with built in ST7789VW driver chip, SPI interface communication, wide viewing angle, support 262K color display, 240×320 resolution Dual 0.96inch OLED secondary screens with built in SSD1315 driver chip, I2C interface communication, blue display color, 128×64 resolution, can be used to display key informations, status indicator messages or small graphics Standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi series boards Onboard 4x user-defined keys for extended applications Provide online development resources and manual for Raspberry Pi/VisionFive2/STM32, etc. Please obtain it from our online customer service

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano Optional interfaces: SPI (default), or I2C, configured via onboard resistor Brings control pins for host boards like Arduino/STM32 Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32),download link: www.waveshare.com/wiki/2.23inch_OLED_HAT

Supports SMS, phone call, GPRS, TCP/IP, DTMF, HTTP, FTPl, etc. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson Nano UART interface, for connecting controller boards like Ardui/STM32 Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano; Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning; Supports data transferring Onboard USB TO UART converter CP2102 for UART debugging; 6x LEDs for indicating the module working status; SIM card slot for 1.8V/3V SIM card RTC with backup batt holder;Baudrate auto detection (1200bps ~115200bps); Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands); Supports SIM application toolkit: GSM 11.14 Release 99; GSM GPRS HAT GNSS HAT Bluetooth HAT Raspberry Pi Raspberry Pi 2B/3B/Zero/Zero W/4/Jetson Nano

1.3inch IPS LCD Main Screen with built in ST7789 driver chip, SPI interface communication, wide viewing angle, supports 65K color display, 240×240 resolution Dual 0.96inch LCD secondary screens with built in ST7735S driver chip, SPI interface communication, supports 65K color display, 160×80 resolution, can be used to display key informations, status indicator messages or small graphics Standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi series boards Onboard 2x user-defined keys for extended applications Provide online development resources and manual for Raspberry Pi/VisionFive2/STM32, etc. Please obtain it from our online customer service

2.4inch LCD Display Module, 65K RGB Colors, 240X320 Resolution, SPI Interface 240X320 resolution, 65K RGB colors, clear and colorful displaying effect SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/STM32 Comes with development resources (examples for Raspberry Pi/STM32)

240×240 resolution, 65K RGB colors, clear and colorful displaying effect SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32 Comes with development resources (examples for Raspberry Pi/Arduino/STM32) Embedded GC9A01 Driver, Using SPI Bus

◆ Bundle for E-Paper Development: Includes 7.5 inch e-ink display module (bare screen) + ESP32-C6 e-paper driver board; a complete e-paper display kit for embedded coding and rapid prototyping. ▰ Crisp 800×480 Black/White E-Paper: 7.5” e-paper screen with 800x480 resolution for sharp text and images; supports partial refresh and full refresh for different update needs in e-ink projects. ⇄ SPI E-Paper Interface, Fewer GPIO: Uses SPI interface for the e-paper module, reducing pin usage and simplifying wiring; ideal for eink display module SPI applications and maker projects. ⎓ 3.3V/5V MCU Friendly (Level Shifting): Onboard 3.3V/5V level shifter supports common controllers; reserved SPI connection for compatible with Arduino, STM32, and ESP32 development boards. ⚙ Driver Board with 24P FPC + Expansion: ESP32-C6 driver board offers 24P FPC connector for multiple e-paper models, BOOT/RST buttons, USB connector, SD card slot, and exposed GPIO for peripherals and storage.

2.4" LCD DISPLAY MODULE Embedded ILI9341 Driver, Using SPI Bus 240×320 resolution, 65K RGB colors, clear and colorful displaying effect SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32 Comes with development resources (examples for Raspberry Pi/Arduino/STM32)

This telecommunication Module supports NB-IoT, Cat-M, EDGE, and GPRS, as well as GNSS positioning function for Europe, Africa, Australia, Southeast Asia. Due to its small size, low delay, and wide coverage, it's ideal for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc. Supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo); Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT Onboard USB interface, to test AT Commands, get GPS positioning data, and so on; with SIM card slot, for both normal SIM card and NB-IoT specific card; 2x LED indicators to monitor the working status; Breakout UART control pins, to connect with/STM32 host boards Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0Ω resistor; Baudrate: 300bps~3686400bps; Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands) Provide development resources and manual (examples for Raspberry Pi/STM32), please refer to the online user manual while using

The 1.69inch LCD display module embedded ST7789V2 driver chip, using SPI interface. Compatible with Raspberry Pi,STM32, etc.Comes with online development resources. 240×280 resolution, 262K colors, clear and colorful displaying effect. SPI interface, minimizes required IO pins, compatible with controller boards like Raspberry Pi/STM32.

1.28" LCD 240×240 round high-definition screen display module for Raspberry Pi/Jetson Nano/Arduino/STM32 65K RGB colors monitor, IPS screen, clear and colorful displaying effect Controlled via 4-wire SPI Bus, minimizes required IO pins, embedded GC9A01 driver, supports controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32 Operating voltage: 3.3V/5V, Dimension: 40.4×37.5(mm) Φ37.5(mm) Comes with development resources (examples for Raspberry Pi/Arduino/STM32)

No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs Comes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/STM32):www.waveshare.com/wiki/2.66inch_e-Paper_Module_(B)

No Backlight, Persistent Display: The display does not require a backlight and retains the last content for an extended period, even after power is turned off. Ultra Low Power Consumption: The display is extremely energy-efficient, with power being consumed only for refreshing the content, making it ideal for low-power applications. Easy to Integrate: It comes with comprehensive online development resources and a manual, including e-Paper Driver HAT circuit diagrams and example code for Raspberry Pi, Jetson Nano, Arduino, and STM32. Supports Multiple Platforms: The display is compatible with a wide range of platforms, thanks to the provided development examples and circuit diagrams, ensuring easy integration with popular hardware. Efficient for Embedded Projects: With low power consumption and the ability to maintain static content without constant power, this display is well-suited for embedded systems and long-duration applications. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.

172×320 resolution, 262K RGB colors, clear and colorful displaying effect. SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32. Comes with development resources (examples for Raspberry Pi/Arduino/STM32). Embedded ST7789V3 Driver, Using SPI Bus. Working voltage: 3.3V/5V (please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly).

This is a 5.79inch E-Paper Display module(with driver board) in Black & White, Support Partial Refresh No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with Raspberry Pi/Jetson Series/STM32 and other controller boards Onboard voltage translator, compatible with 3.3V/5V MCUs Can provide with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Series/STM32)

【No backlight】No backlight, keeps displaying last content for a long time even when power down; Ultra low power consumption, basically power is only required for refreshing. 【Pi 40PIN GPIO header】Standard RaPi 40PIN GPIO Header, compatible with Raspberry Pi series boards, Jetson Nano, RDK X3. 【 SPI Control Interface】Onboard SPI Control Interface, For Use With Controller Boards Like RPi / Arduino / STM32. 【Voltage Translator】Onboard Voltage Translator, compatible With 3.3V / 5V MCUs. 【Application examples】Suitable for price Tags, asset/equipment Tags, shelf labels, conference name tags... 【Development resources and manual】Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi / Jetson Nano / RDK X3 / Arduino / STM32).

240x284 resolution, 262K colors, clear and colorful displaying effect High touch screen transmittance, fast response and long lifetime Embedded ST7789P driver chip and CST816D capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins, supports controller boards like Raspberry Pi / ESP32S3 / Raspberry Pi Pico / STM32 Can provide with online development resources and manual (examples for Raspberry Pi / ESP32 / Raspberry Pi Pico / STM32)

Wireless Video Transmission: The image transmission module is equipped with an ESP32 chip and a 2MP HD camera, supporting wireless transmission over 2.4GHz WiFi frequency band. It effortlessly achieves real-time transmission of high-definition video images, allowing for remote control commands, widely applied in DIY smart programming car robots. Extensive Compatibility: The WiFi image transmission module is compatible with Arduino, STM32, micro:bit, Raspberry Pi Pico, and many other microcontrollers, as well as development boards such as Raspberry Pi and Jetson Nano, providing visual solutions for users' project development. Two Operating Modes: The ESP32-CAM image transmission module supports both the AP mode with self-delivered hotspot and the STA mode with module-connected WiFi, allowing flexible switching or simultaneous activation according to actual application requirements. Two Versions of Bracket and Gimbal Optional: The ESP32-CAM image transmission module adopts an integrated shell design with multiple installation holes reserved, compatible with standard building block installation. Users can choose between a fixed bracket and a two-degree-of-freedom motorized gimbal bracket according to their needs, facilitating quick and convenient installation. What You Get: Yahboom provides program examples for this sensor module, aiding users in quick setup. Additionally, we offer a remote control APP for the robot car, enabling users to view real-time video footage by connecting their smartphones. If you encounter any technical issues regarding this module, Yahboom's technical support is available to assist you at any time.

This is an OLED display HAT for Raspberry Pi, 2.23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Optional interfaces: SPI (default), or I2C, configured via onboard resistor. Brings control pins for host boards like Arduino/STM32. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32). oled display hat raspberry pi spi driver extension header jetson nano control pins ai smart

Wireless Video Transmission: The image transmission module is equipped with an ESP32 chip and a 2MP HD camera, supporting wireless transmission over 2.4GHz WiFi frequency band. It effortlessly achieves real-time transmission of high-definition video images, allowing for remote control commands, widely applied in DIY smart programming car robots. Extensive Compatibility: The WiFi image transmission module is compatible with Arduino, STM32, micro:bit, Raspberry Pi Pico, and many other microcontrollers, as well as development boards such as Raspberry Pi and Jetson Nano, providing visual solutions for users' project development. Two Operating Modes: The ESP32-CAM image transmission module supports both the AP mode with self-delivered hotspot and the STA mode with module-connected WiFi, allowing flexible switching or simultaneous activation according to actual application requirements. Two Versions of Bracket and Gimbal Optional: The ESP32-CAM image transmission module adopts an integrated shell design with multiple installation holes reserved, compatible with standard building block installation. Users can choose between a fixed bracket and a two-degree-of-freedom motorized gimbal bracket according to their needs, facilitating quick and convenient installation. What You Get: Yahboom provides program examples for this sensor module, aiding users in quick setup. Additionally, we offer a remote control APP for the robot car, enabling users to view real-time video footage by connecting their smartphones. If you encounter any technical issues regarding this module, Yahboom's technical support is available to assist you at any time.

240×280 resolution, 262K colors, clear and colorful displaying effect High touch screen transmittance, fast response and long lifetime Embedded ST7789V2 driver chip and CST816T capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins, supports controller boards like Raspberry Pi / ESP32S3 / Raspberry Pi Pico / Arduino / STM32 Comes with online development resources and manual (examples for Raspberry Pi / ESP32S3 / Raspberry Pi Pico / Arduino / STM32) Compatible With 3.3V / 5V Power Input

This 2-Channel Isolated CAN FD Expansion HAT with Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.Breakout SPI control pins, for connecting with host control boards like STM32/Arduino Supports both traditional CAN2.0 and CAN FD protocols, up to 8Mbps data rate Onboard electrical isolation, up to 5KV isolated voltage, high anti-interference capability, stable operation.Onboard lighting proof, ESD, short circuit protection, more safe communication Onboard voltage translator, select 3.3V/5V operating voltage by jumper.Onboard 120Ω terminal resistor, configured by jumper Comes with development resources and manual (examples for Raspberry Pi/Arduino)

No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs Comes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32) E-Paper Display Panel E-ink Electronic Paper Screen raspberry display raspberry pi 3b raspberry pi arduino raspberry pi zero w

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards Onboard QMI8658C+AK09918 (3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer), detects movement, orientation, and magnetic.Onboard SHTC3 digital temperature and humidity sensor, allows monitoring the environment Onboard LPS22HB barometric pressure sensor, allows monitoring the environment.Onboard TCS34725 color sensor, identifies the color of nearby object Onboard SGM58031, 4-ch 16-bit precision ADC, AD expansion to support more external sensors. Brings I2C control pins, for connecting other host boards like STM32.Comes with development resources and manual (examples for Raspberry Pi/STM32)

Provide online user manual, please check the manual carefully before using. Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/STM32). Partial refresh is not supported. No backlight.keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs. Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

For Raspberry Pi 5 epaper module, no backlight, keeps displaying last content for a long time even when power down For Raspberry Pi 5 eink screen, ultra low power consumption, basically power is only required for refreshing For Raspberry Pi 5 e-paper module, SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)