esp32 development board

High-performance MCU with RISC-V 32-bit dual-core and single-core processors. 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP Static RAM, 8 KB TCM Powerful image and voice processing capability. Provides image and voice processing interfaces including JPEG Codec, Pixel Processing Accelerator, Image Signal Processor, H264 encoder 32MB PStatic RAM in the chip's package, with onboard 32MB Nor Flash. Commonly used peripherals such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO 3.0 TF card slot, microphone, and speaker header, etc. Adtaping 2*20 GPIO headers with 27 x remaining programmable GPIOs Security features: Secure Boot, Flash Encryption, cryptographic accelerators, and TRNG. Additionally, hardware access protection mechanisms help to enable Access Permission Management and Privilege Separation

ESP32-S3-LR1121-HF-Kit, comes with ESP32-S3-LR1121-HF & USB port adapter board & FFC cable. HF version, 850 ~ 930MHz frequency. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) to meet diverse wireless needs Built in 512KB Static RAM and 384KB ROM, with onboard 4MB Flash and 2MB PStatic RAM. Castellated module allows soldering direct to carrier boards. Onboard rich peripheral interfaces including 4 x SPI, 2 x I2C, 3 x UART, 2 x I2S, and 2 x ADC, etc.. Based on the third-generation low-power LoRa transceiver LR1121 Supports Sub-GHz (150MHz ~ 960MHz), S-band (1.9GHz ~ 2.1GHz), and 2.4GHz ISM frequency bands. Connects to the cloud via LoRa or LoRaWAN protocol through a gateway, enabling low-power wide-area networking (LPWAN) Supports LoRa, (G)FSK, and LR-FHSS modulation schemes, compatible with SX126X/SX127X series for easy product upgrades. Integrates AES-128 encryption engine to enhance data security Onboard TCXO crystal oscillator ensures frequency stability under extreme temperature conditions. Suitable for IoT applications such as industrial telemetry, smart home, environmental monitoring, and remote data acquisition

Compact & Portable Design:The module's design is compact, making it easy to carry and integrate into various projects Esp32 P4 Devkit|Esp32...

ESP32-S3-Touch-LCD-3.49-EN, Case A version, without batt. Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Reserved 22PIN 2.54mm pitch through-hole pads for easy connection to external modules or functional expansion, enhancing development flexibility. Built-in 512KB of Static RAM and 384KB ROM, with onboard 8MB PStatic RAM and an external 16MB Flash memory. Onboard 3.49inch IPS capacitive touch display for clear color picture display, 172x640 resolution, 16.7M color Equipped with dual microphone array with noise reduction and echo cancellation circuit, suitable for accurate speech recognition and near/far-field wake-up. Built-in AXS15231B LCD & touch controller, using QSPI and I2C interfaces for communication respectively Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc.. Onboard PCF85063 RTC chip for RTC functionality. Onboard PWR and BOOT programmable buttons for easy custom function development Onboard 3.7V MX1.25 Li batt recharge/discharge header or Li batt holder. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design

ESP32-P4-Module Development Board. High-performance Development Board Based On ESP32-P4 and ESP32-C6, supports Wi-Fi 6 and Bluetooth 5 wireless connection. It features rich Human-Machine interfaces, including MIPI-CSI (with integrated Image Signal Processor), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, TWAI, etc. Additionally, it supports USB OTG 2.0 HS, onboard RJ45 Ethernet port with reserved PoE function header, and onboard 40PIN GPIO header which is compatible with some RPi HATs, enabling a wider range of application adaptability. The ESP32-P4 adopts a 400MHz dual-core RISC-V processor and supports up to 32MB PSRAM, featuring USB 2.0, MIPI-CSI/DSI, H.264 encoder, and other peripherals, meeting the needs for low-cost, high-performance, and low-power multimedia development. It also integrates the Digital Signature Peripheral and a dedicated Key Management Unit, ensuring secure data and operations. Specifically designed for high-performance and high-security applications, the ESP32-P4-Module-DEV-KIT meets the requirements of Human-Machine interaction, efficient edge computing, and IO expansion. Security features: Secure Boot, Flash Encryption, cryptographic accelerators, and TRNG. Additionally, hardware access protection mechanisms help to enable Access Permission Management and Privilege Separation.

ESP32-S3-Touch-LCD-3.49, Case A version. Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Reserved 22PIN 2.54mm pitch through-hole pads for easy connection to external modules or functional expansion, enhancing development flexibility. Built-in 512KB of Static RAM and 384KB ROM, with onboard 8MB PStatic RAM and an external 16MB Flash memory. Onboard 3.49inch IPS capacitive touch display for clear color picture display, 172x640 resolution, 16.7M color Equipped with dual microphone array with noise reduction and echo cancellation circuit, suitable for accurate speech recognition and near/far-field wake-up. Built-in AXS15231B LCD & touch controller, using QSPI and I2C interfaces for communication respectively Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc.. Onboard PCF85063 RTC chip for RTC functionality. Onboard PWR and BOOT programmable buttons for easy custom function development Onboard 3.7V MX1.25 Li batt recharge/discharge header or Li batt holder. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design

High-performance MCU with RISC-V 32-bit dual-core and single-core processors. 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP Static RAM, 8 KB TCM Powerful image and voice processing capability. Provides image and voice processing interfaces including JPEG Codec, Pixel Processing Accelerator, Image Signal Processor, H264 encoder 32MB PStatic RAM in the chip's package, with onboard 32MB Nor Flash. Commonly used peripherals such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO 3.0 TF card slot, microphone, and speaker header, etc. Adtaping 2*20 GPIO headers with 27 x remaining programmable GPIOs Security features: Secure Boot, Flash Encryption, cryptographic accelerators, and TRNG. Additionally, hardware access protection mechanisms help to enable Access Permission Management and Privilege Separation

ESP32-S3-Touch-LCD-3.49B-EN, Case B version, without batt. Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Reserved 22PIN 2.54mm pitch through-hole pads for easy connection to external modules or functional expansion, enhancing development flexibility. Built-in 512KB of Static RAM and 384KB ROM, with onboard 8MB PStatic RAM and an external 16MB Flash memory. Onboard 3.49inch IPS capacitive touch display for clear color picture display, 172x640 resolution, 16.7M color Equipped with dual microphone array with noise reduction and echo cancellation circuit, suitable for accurate speech recognition and near/far-field wake-up. Built-in AXS15231B LCD & touch controller, using QSPI and I2C interfaces for communication respectively Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc.. Onboard PCF85063 RTC chip for RTC functionality. Onboard PWR and BOOT programmable buttons for easy custom function development Onboard 3.7V MX1.25 Li batt recharge/discharge header or Li batt holder. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design

Quality Assurance: This ESP32 S3 IoT original core board with Wi-Fi and is precision-manufactured to meet the highest quality and performance...

High-Performance Dual-Core Processor - Combines ESP32-P4 (RISC-V) + ESP32-C6 for hybrid computing, integrated 400MHz dual-core RISC-V processor enabling 32MB PStatic RAM allocation for multimedia tasks like H.264 encoding ‌Raspberry Pi GPIO and Reserved PoE Module Header - Onboard 40PIN GPIO expansion interface, compatible with some Raspberry Pi expansion boards, enabling wider application adaptation; Onboard PoE header supports IEEE 802.3af/at, enabling single-cable power/network for smart cameras or edge servers Rich Interfaces - Providing rich human-computer interaction interfaces, Including MIPI-CSI (Integrated Image Signal Processor ISP), MIPI-DSI, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, TWAI ‌Security Features - Support hardware access protection, capable of implementing Access Management (APM) and permission separation Professional Image/Video - Built-in JPEG codec, Pixel Processing Accelerator, image Signal Processor and H264 video encoder, meets the requirements of embedded systems in human-computer interaction, edge computing, IO expansion, etc

Prozessor: Der ESP32-S3 ist mit einem Xtensa LX7 Einkernprozessor mit einer Frequenz von bis zu 240 MHz ausgestattet. Speicher: Das...

Waveshare ESP32-S3-Zero-N8R8 Mini Development Board mit 8 MB Flash, 8 MB PSRAM, Wi-Fi und Bluetooth 5 Das Waveshare ESP32-S3-Zero-N8R8 ist ein kompaktes Entwicklungsboard auf Basis des ESP32-S3 Mikrocontrollers mit einem Xtensa 32 Bit LX7 Dual-Core Prozessor und einer Taktfrequenz von bis zu 240 MHz. Das Board unterstützt 2,4 GHz Wi-Fi nach IEEE 802.11 b/g/n sowie Bluetooth 5 Low Energy (BLE) und eignet sich für die Entwicklung von IoT-Geräten, drahtlosen Sensornetzwerken, Steuerungssystemen und eingebetteten Anwendungen. Mit 8 MB Flash-Speicher und 8 MB PSRAM stehen Speicherressourcen für Programmcode, Datenverarbeitung und Anwendungen mit zusätzlichem Arbeitsspeicherbedarf zur Verfügung. Die integrierte Keramikantenne ermöglicht die drahtlose Kommunikation ohne eine zusätzlich anzuschließende Antenne. Prozessor, Speicher und drahtlose Kommunikation Der ESP32-S3 verfügt über einen Xtensa 32 Bit LX7 Dual-Core Prozessor mit einer

Due to different production batches, there may be slight variations in the printed text, but this does not affect usability. Color: As Shown...

Prozessor: Der ESP32-S3 ist mit einem Xtensa LX7 Einkernprozessor mit einer Frequenz von bis zu 240 MHz ausgestattet. Speicher: Das...

Für ESP WiFi und Bluetooth Entwicklungboard: Dieses für ESP kompatible Board mit ESP-WM-32 Chip bietet Dual-Mode Bluetooth und WiFi Funktionen für IoT Projekte und unterstützt 2.4GHz WLAN mit IEEE 802.11 b/g/n Standard. CP2012 USB zu Seriell Konverter: Der integrierte CP2012 Chip ermöglicht zuverlässige USB-Kommunikation mit 38-Pin Type-C Interface für einfache Programmierung und kompatibel mit Arduino IDE Entwicklungsumgebung. Leistungsstarker Dual-Core Prozessor: Mit 240MHz LX6 Dual-Core Prozessor und 4MB Flash Speicher bietet das Board hohe Rechenleistung für anspruchsvolle Anwendungen bei nur 3.3V Betriebsspannung. Vielseitige GPIO Anschlüsse: 32 programmierbare GPIO Pins unterstützen UART, SPI, I2C, PWM Schnittstellen für Sensoren und Erweiterungen in verschiedenen IoT Projekten. Energieeffizientes Design: Die 40nm Niedrigstrom-Technologie ermöglicht minimalen Stromverbrauch mit AP/STA/AP+STA Betriebsmodi und Bluetooth 4.2 BLE Unterstützung für batteriebetriebene Anwendungen.

Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (BLE), with onboard antenna Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory. Type-C connector, keeps it up to date, easier to use Onboard 1.28inch LCD display, IPS panel, 240x240 resolution, 65K color. Adopts CNC metal case with Acrylic dull-polish bottom plate Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture. Onboard 3.7V lithium batt recharge/discharge header and GPIO headers Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios. Integrated with USB serial port full-speed controller, GPIO pins allow flexibly configuring pin functions

Vollständig aufgerüstet: hohe Qualität, hohe Verstärkung, Feder-Back-Semi-Metallic-Erdungsstecker, hohe Effizienz, mit unserer Premium-Antenne für Meshtastic LoRa entwickelt, verbessern Sie Ihre LoRa Kommunikation Erfahrung. Diese 21-cm-Federantenne ist die effizienteste Antenne auf dem Markt und gewährleistet auch in rauen Umgebungen eine Verbindung über große Entfernungen.Es ist perfekt an das Heltec V3 ESP32 LoRa RAK Entwicklungsboard etc. angepasst und ist ideal für Amateure und Profis. Meshtastische Antennenparameter: Frequenz: 868MHz; Verstärkung: 10dBi; Stehwellenverhältnis ≤ 1,5; Impedanz: 50Ω: Steckertyp: SMA-Stecker; Material: Kupfer; Radomfarbe: schwarz; Radommaterial: PC; Antennenlänge: 21cm; Kabeltyp: 10cm U. FL auf SMA-Buchse Kabel Langlebiges Design: Die Antenne besteht aus leichten, aber robusten Materialien und ist widerstandsfähig genug, um im Freien in einer Vielzahl von Umgebungen und Wetterbedingungen verwendet zu werden Einfach zu installieren: Mit dem SMA-Anschluss direkt in das Gerät einstecken - schnell und ohne Werkzeug einrichten und bereitstellen Kundendienst: Wir sind zu Ihrer Zufriedenheit verpflichtet, daher sind unsere Meshtastic LoRa-Antennen mit einem zuverlässigen Kundensupport ausgestattet.Wenn Sie auf Probleme stoßen oder Fragen zur Installation und Verwendung haben, ist unser Team immer für Sie da.Dieses Produkt, das Qualität, Leistung und exzellenten Kundendienst vereint, gibt Ihnen Sicherheit!

Vollständig aufgerüstet: wasserdicht, gute Qualität, höchste Verstärkung, federbelasteter Vollmetall-Erdungsstecker, hohe Effizienz, verwenden Sie unsere Premium-Antenne für Meshtastic LoRa, verbessern Sie Ihr LoRa-Kommunikationserlebnis.Diese 22-cm-Federantenne ist die effizienteste Antenne auf dem Markt und gewährleistet eine Langstreckenverbindung, die auch in rauen Umgebungen die Verbindung aufrechterhalten kann.Es ist perfekt für Heltec V3 ESP32 LoRa RAK Entwicklungsboard, etc Meshtastische Antennenparameter: Frequenz: 868MHz; Verstärkung: 10dBi; ob wasserdicht: wasserdicht; Stehwellenverhältnis ≤ 1,5; Impedanz: 50Ω: Steckertyp: SMA-Stecker; Material: Kupfer; Radomfarbe: Schwarz; Radom-Material: PC; Antennenlänge: 22cm; Kabeltyp: 10cm U. FL auf SMA-Buchsenkabel Langlebiges Design: Die Antenne besteht aus leichten, aber robusten Materialien und ist widerstandsfähig genug, um im Freien in einer Vielzahl von Umgebungen und Wetterbedingungen verwendet zu werden Einfach zu installieren: Mit dem SMA-Anschluss direkt in das Gerät einstecken - schnell und ohne Werkzeug einrichten und bereitstellen Kundendienst: Wir sind zu Ihrer Zufriedenheit verpflichtet, daher sind unsere Meshtastic LoRa-Antennen mit einem zuverlässigen Kundensupport ausgestattet.Wenn Sie auf Probleme stoßen oder Fragen zur Installation und Verwendung haben, ist unser Team immer für Sie da.Dieses Produkt, das Qualität, Leistung und exzellenten Kundendienst vereint, gibt Ihnen Sicherheit!

ESP32-C6-LCD-1.69 is a tiny size, low-cost, high-performance MCU board. Onboard 1.69inch 262K LCD display, Lithium batt-ery recharge manager, audio codec chip, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC chip, and so on, which makes it easy for you to develop and integrate into products quickly. ESP32-S3 suitable for AIoT applications: Equipped with a high-performance 32-bit RISC-V processor and a low-power 32-bit RISC-V processor, the main frequency is up to 160 MHz, Powerful AI Computing Capability & Reliable security features. Integrated WiFi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance. Built-in 320KB ROM, 512KB HP SRAM, 16KB LP SRAM and 16MB Flash memory. Type-C connector for easier use. Onboard 1.69inch LCD display for clear color picture display, 240 × 280 resolution, 262K color. Built-in ST7789V2 driver chip, using SPI communication, effectively saving the IO resources. Support AI voice interaction: Allows access to online large model platforms such as DeepSeek, Doubao, ChatGPT,etc. Onboard ES8311 audio codec chip, microphone, and speaker for AI interaction.

ESP32-S3-AMOLED-1.91 is a high-performance and scalable ESP32_GUI development board. With touch, support for 2.4GHz WiFi and BLE 5, integrated...

High-Performance Controller: Powered by the ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, clocked at to 240MHz. Wireless Connectivity: Supports 2.

The ESP32-C3-LCD-1.47 is a microcontroller development board that supports 2.4GHz Wi-Fi and BT 5 (LE), integrates high-capacity Flash and PStatic RAM. Onboard 1.47inch LCD display can smoothly run GUI programs such as LVGL With rich peripheral interfaces, it supports rapid development of applications on the ESP32-C3, including HMI, IoT devices, and smart displays. Built-in 400KB Static RAM and 384KB ROM, with onboard 4MB Flash Adopts ESP32-C3FH4 main control chip, equipped with 32-bit RISC-V single-core low-power SoC, up to 160MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) wireless communication Onboard ceramic antenna for easy integration into custom baseboards or embedded devices. Integrated USB full-speed serial controller for easy program downloading and debugging Adapting 15 x GPIO pins for flexible expansion of various peripheral functions. Provides rich peripheral resources, including 3 x SPI, 1 x I2C, 2 x UART, 1 x I2S, 2 x ADC, and other interfaces

High-Performance Controller: Powered by the ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, clocked at to 240MHz. Wireless Connectivity: Supports 2.

Diverse Connectivity Options:Comes with a Type-C connector, 8PIN 2.54mm header, and programmable buttons for versatile device integration.

This is a 3PCs pack of XIAO ESP32C3, an thumb-size dev board that adopts the RISC-V architecture, supporting both Wi-Fi and BLE wireless...

Equipped with 2.4GHz Wi-Fi 6 and BLE 5 for fast and stable wireless connectivity Onboard 1.47inch capacitive touch IPS display with 172x320 resolution and 262K display color Powered by 160MHz 32-bit RISC-V processor plus low-power 20MHz RISC-V coprocessor Integrated 8MB Flash, 512KB HP Static RAM, 16KB LP Static RAM, and onboard TF card slot for extended storage Supports multiple IO interfaces and full-speed USB standard for flexible peripheral connection

Advanced AI Technology: Equipped with cutting- voice recognition and AI chat capabilities, for the Echoear Meow Companion Robot engages in...

Display Panel: AMOLED Display Size: 1.8 inches Display Resolution: 368 x 448 pixels Display Colors: 16.7M Display Brightness: 350 cd/m²,

High-Performance Controller: Powered by the ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, clocked at to 240MHz. Wireless Connectivity: Supports 2.

Advanced AI Technology: Equipped with cutting- voice recognition and AI chat capabilities, for the Echoear Meow Companion Robot engages in...