waveshare esp32 s3

Mit einer Auflösung von 240 x 284 Pixeln und 262.000 Farben kann es Farbbilder klar darstellen. Touchscreens zeichnen sich durch hohe...

Equipped with ESP32-S3-WROOM-1 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency, offering powerful data processing capabilities; Supports 2.4GHz WiFi (802.11 b/g/n) and Blue-T 5 (LE), with onboard antenna. Onboard RGB LED indicator for real-time monitoring the operating status of the module; Onboard 3.7V MX1.25 Lithium batt recharge / discharge header for flexible power supply solution, extending device operation time; Onboard 2 × 10 solder pads, including 14 × GPIO, 1 × I2C, and 1 × UART, for external device expansion. Built in 512KB of Static RAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory; Compact size design, more space-saving, making it ideal for embedded applications

Adopts ESP32-S3R2 chip with high-performance Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz Built in 512KB S-RAM, 384KB ROM, 2MB of PS-RAM, and 16MB Flash memory. Integrated 2.4GHz Wi-Fi and BT LE dual-mode wireless communication, featuring superior RF performance Equipped with the SIM7670G cellular module, supports 4G Cat-1 networking, GNSS positioning and other functions. Onboard USB switching IC and DIP switch for switching to use the USB interface of SIM7670G, suitable for connecting with PC for dial-up internet or debugging of SIM7670G module Onboard batt charging, solar charging, power management, batt capacity measurement, and related protection circuits, supports USB and solar charging with real-time batt capacity measurement. Onboard batt holder (batt is NOT included), adapting VBAT pin header for connecting to external 3.7V batt, with anti-reverse protection Rich peripheral interfaces such as camera interface, TF card slot, USB port, 38PIN header, etc., easy to expand and achieve various functions. Onboard multiple DIP switches for camera on/off, switching USB channels to avoid interface conflict, and setting power on/off for some circuits to reduce power consumption

Equipped with ESP32-S3-WROOM-1 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency, offering powerful data processing capabilities; Supports 2.4GHz WiFi (802.11 b/g/n) and Blue-T 5 (LE), with onboard antenna. Onboard RGB LED indicator for real-time monitoring the operating status of the module; Onboard 3.7V MX1.25 Lithium batt recharge / discharge header for flexible power supply solution, extending device operation time; Onboard 2 × 10 solder pads, including 14 × GPIO, 1 × I2C, and 1 × UART, for external device expansion. Built in 512KB of Static RAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory; Compact size design, more space-saving, making it ideal for embedded applications

A microcontroller development board with 5inch capacitive touch display, can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications 1024x600 resolution, 65K color. 178° Viewing Angle. Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Supports passive and active digital input, with bi-directional optocoupler isolation Onboard voltage regulator, supports 7~36V wide range power supply. Onboard RTC chip and rechargeable batt to ensure time data is not lost when power loss. Onboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P batt header and digital isolated IO interfaces, etc. Onboard LED indicators for indicating the power and batt recharging status. Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios

The ESP32-S3-Touch-LCD-4.3C-BOX(With plastic case) integrates a 4.3inch capacitive touch display and an audio module, supporting AI speech interaction and the LVGL graphical interface. Combining display, touch, and voice in one device, it enables easy development of intelligent human-machine interaction terminals Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM Onboard 4.3inch capacitive touch display, 800 x 480 resolution, 65K color. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Onboard ES8311 audio codec chip and ES7210 echo cancellation circuit. Onboard voltage regulator, supports 7 ~ 36V wide range power supply Onboard RTC chip and Batt holder to ensure time data is not lost during power loss when Batt is installed. Onboard I2C interface, TF card slot, MX1.25 2PIN Batt header, and digital isolated IO interfaces, etc. Supports passive and active digital input with bi-directional optocoupler isolation, and the active digital input supports positive and negative voltages Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current. Onboard LED indicators for indicating the power and Batt recharging status. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios

Equipped with ESP32-S3 and ESP32 dual MCUs, up to 4 cores and 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) and Classic Bluetooth, with onboard antenna Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Onboard 1.8inch LCD display, 360 × 360 resolution, 262K color. Supports touch control via I2C interface, with interrupt support Onboard audio decoder chip, microphone, knob encoder, vibration motor, TF card slot, and batt recharge management module CNC process metal case with blue / black color options, nice looking and durable, easy to carry

The ESP32-S3-ePaper-3.97-Kit(with TF Card & Card Reader) is a high-performance, highly integrated microcontroller development board designed by Waveshare. Equipped with an ESP32-S3 microcontroller, supports dual-mode Wi-Fi and BLE communication. Onboard 3.97inch e-paper display, features ultra-low power consumption and ambient light readability, suitable for portable devices and long-Batt-life scenarios Integrated with an RTC chip, SHTC3 temperature and humidity sensor, TF card slot, low-power audio codec chip circuit, and Lithium Batt recharge management circuit. It provides a flexible and reliable development platform for IoT terminals, electronic tags, portable displays, and other applications Adopts ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built-in 512KB Static RAM, 384KB ROM, with integrated 8MB PStatic RAM and external 16MB Flash. Onboard 3.97inch e-paper display, 800 x 480 resolution, features high contrast and wide viewing angle. Onboard programmable PWR and BOOT side buttons for customized function development Onboard audio codec chip, supports voice capture and playback, enabling AI voice interaction applications. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc.. Onboard TG28 power management chip, supports 3.7V MX1.25 Lithium Batt for uninterrupted power supply, with a reserved backup Batt header to ensure continuous RTC functionality during main Batt replacement Onboard PCF85063 RTC chip and SHTC3 temperature & humidity sensor for accurate RTC management and environmental monitoring. Adopts TG28 chip for efficient power management, supports multiple voltage outputs, Batt charging, Batt management, and Batt life optimization, etc.. Type-C port, improving device compatibility, easier to use. Onboard TF card slot for storage expansion and rapid data transfer, suitable for data logging, media playback, and other applications, simplifying circuit design

Integrated LCD Screen, TF Card Slot, Boot Button and Other Peripheral interfaces Suitable For Applications Such As Wireless USB Flash Drive, USB WiFi/Bluetooth, USB Dongle Based On ESP32-S3 Adopts ESP32-S3R2 chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz Built in 512KB SRAM, 384KB ROM, 2MB of on-chip PSRAM, and onboard 16MB Flash memory Onboard 1.14inch 240×135 pixels 65K color IPS LCD display Integrated 2.4GHz WiFi and Bluetooth LE wireless communication WiFi supports Infrastructure BSS in Station, SoftAP, and Station + SoftAP modes WiFi supports 1T1R mode with data rate up to 150 Mbps Bluetooth supports high power mode (20dBm) Internal co-existence mechanism between Wi-Fi and Bluetooth to share the same antenna Onboard 3PIN UART port, 3PIN GPIO header and 4PIN I2C port Equipped with plastic case and cables Provides online open-source demo and resources, more convenient for learning and development

240×320 resolution, 262K colors, clear and colorful displaying effect High touch screen transmittance, fast response and long lifetime Embedded with ST7789T3 driver chip and CST328 capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins Adapting 13PIN connector and 18PIN FPC slot for connecting the LCD module to the host board Onboard voltage translator, compatible with 3.3V / 5V operating voltage

R7FA4 PLUS B EntwicklungsbrettR7FA4 PLUS B Entwicklungsboard: Auf R7FA4M1AB3CFM basierend, kompatibel mit Arduino UNO R4 WiFi Eine erweiterte Version des Arduino UNO R4 WiFi, ausgestattet mit dem ESP32-S3FN8 für zusätzliche Wireless-Kommunikation und einem 12×8 LED-Matrix-Display. Ideal für IoT-Anwendungen und Projekte, die eine visuelle Ausgabe erfordern. Merkmale im Überblick Basierend auf R7FA4M1AB3CFM, erweitert mit ESP32-S3FN8 für 2.4GHz WiFi und Bluetooth LE.Unterstützt eine Vielzahl von Shields dank dualer Betriebsspannung (5V/3.3V) und hoher Stromausgabe (bis zu 2000mA).Onboard 12×8 rote LED-Matrix unterstützt die Anpassung von Anzeigeeffekten.Technische Daten Mikrocontroller: R7FA4 (32-Bit ARM Cortex-M4), ESP32-S3FN8 (Dual-Core 32-Bit Xtensa LX7).Speicher: 256kB Flash, 32kB RAM; ESP32-S3FN8: 384kB ROM, 512kB RAM, 8MB Flash.Drahtlose Kommunikation: 2.4GHz WiFi + Bluetooth LE.Stromversorgung: 6V 24V DC Eingang, USB Typ-C Anschluss.Sonstige Daten Onboard Spannungsregler und Spannungsübersetzer für reibungslose Kommunikat

1.69inch Round LCD Display Module with Touch panel, Micro LCD Display 240×280 resolution, 262K colors, clear and colorful displaying effect High touch screen transmittance, fast response and long lifetime Embedded ST7789V2 driver chip and CST816T capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins, supports controller boards like Raspberry Pi 5 / ESP32S3 / Raspberry Pi Pico / Arduino / STM32 Comes with online development resources and manual (examples for Raspberry Pi / ESP32S3 / Raspberry Pi Pico / Arduino / STM32)

This ESP32-S3 E-Paper driver board is a compact-size microcontroller development board with 60PIN e-paper display connector. Adopts ESP32-S3-WROOM-2-N32R16V module, which is equipped with Xtensa 32-bit LX7 dual-core processor with 240MHz running frequency, built-in 512KB Static RAM (TCM), 16MB PSRAM and 32MB Flash. Supports Wi-Fi and BLE dual-mode communication, onboard TF card slot, low power audio codec, ETA6098 high-efficiency Lithium Batt recharge manager and MX1.25 Lithium Batt header. Onboard CH343 and CH334 USB HUB chips, supports USB and UART development at the same time via a Type-C port. Adapting multiple GPIO pins for easy expansion with a variety of peripheral devices. Adopts E Ink Spectra 6 (E6) technology, featuring high contrast and high color saturation. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing

Ausgestattet mit ESP32-S3-N32R16 Xtensa 32-Bit LX7 Dual-Core-Prozessor, bis zu 240 MHz Hauptfrequenz Eingebauter 512 KB statischer RAM und 384 KB ROM, mit integriertem 32 MB Flash-Speicher und 16 MB PSRAM Kompatibel mit der gesamten Produktlinie der Waveshare LED-RGB-Matrix-Panels und kann problemlos grafische Schnittstellenprogramme wie LVGL ausführen Integrierter ES7210 Echounterdrückungs-Chip für verbesserte Sprachverarbeitungsleistung Ausgestattet mit Dual-Mikrofon-Array für Audio-Algorithmen wie Rauschunterdrückung und Echounterdrückung, geeignet für genaue Spracherkennung und Sprachwake-Up-Anwendungen

ESP32-S3 AI Smart Speaker Dev Board Adopts ESP32-S3R8 module with 32-bit LX7 dual-core processor, up to 240MHz main frequency, integrated 512KB S-RAM, 384KB ROM, 8MB PSRAM, external 16MB Flash memory, onboard TF card slot for storing audio files, etc. ESP32-S3 Audio Board Supports AI speech interaction. Onboard audio decoding chip, dual microphones and speaker header. Dual microphone array with noise reduction and echo cancellation, suitable for accurate speech recognition and near/far-field wake-up Onboard LCD interface, compatible with Waveshare 1.47inch/2inch/2.8inch/3.5inch LCDs and other SPI displays. Onboard DVP interface, compatible with ESP32 OV2640/OV5640 cameras. Onboard 7x surround RGB LEDs, programmable for a variety of dynamic effects Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) wireless connectivity, with onboard antenna Integrated PCF85063 RTC chip, supports power-off time retention for alarm, scheduled task, and wake-up functions. Built-in battery recharge management module. Multiple reserved buttons and battery switch for customized function development

It is a highly integrated LED matrix panel driver board. It is suitable for HUB75 interface RGB matrix panels and related embedded applications. Based on the ESP32-S3 microcontroller, it integrates large-capacity Flash storage, RTC chip, IMU, TF card slot, low-power audio codec chip, dual microphones, and so on. It also provides reserved interfaces such as USB, UART, I2C, and GPIO, offering strong scalability and enabling users to quickly develop and integrate it into practical applications. Equipped with ESP32-S3-N32R16 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE). Built in 512KB Static RAM and 384KB ROM, with onboard 32MB Flash memory and 16MB PSRAM. Compatible with the full product line of Waveshare LED RGB matrix panels, and can smoothly run graphical interface programs such as LVGL. Onboard ES7210 echo cancellation chip for improved voice processing performance. Onboard ES8311 low-power audio codec chip, supporting high-quality audio input and output. Equipped with dual microphones array for audio algorithms such as noise reduction and echo cancellation, suitable for accurate speech recognition and voice wake-up applications. Onboard speaker header, supports audio playback output, and can be connected directly to a speaker. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, etc. Integrated SHTC3 temperature and humidity sensor for accurate environmental monitoring. Onboard TF card slot for extended storage of images, audio, and various file types, making it convenient for reading and writing data. Onboard PCF85063 RTC chip with a reserved SH1.0 batt connector, enabling continuous timekeeping during power loss.