waveshare lcd

480x320 hardware resolution, software configurable up to 1920x1080;Resistive touch control IPS technology, high quality and perfect displaying from very wide viewing angle; Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie); Supports FBCP software driver as well, allows to config software resolution and set up dual-display Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required; HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) Multi-languages OSD menu, for power management, brightness adjustment, contrast adjustment, etc.; Supports 100-level backlight adjustment; Supports HDMI audio output

800 x 480 Hardware-Auflösung, konfigurierbar über Software (bis zu 1920 x 1080); Resistive Touch Control Beliebte Mini-PCs wie Raspberry Pi, BB Black, Banana Pi, sowie allgemeine Desktop-Computer When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free; When work as a computer monitor, supports Windows 10/8.1/8/7, single touch and driver free Unterstützt beliebte Spielekonsolen wie Microsoft XBOX360, Sony PS4, Nintendo Switch usw.; mehrere Sprachen OSD Menü, für Powermanagement, Helligkeit / Kontrast Einstellung, etc. 3,5 mm Audio-Klinkenstecker, unterstützt HDMI-Audio-Ausgang; unterstützt VGA-Eingang (spezielles Kabel ist erforderlich und muss separat gekauft werden)

ESP32-C3-LCD-0.71 is a microcontroller development board with 2.4GHz WiFi and BT BLE 5 support. Onboard 0.71inch LCD display which can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI applications based on the ESP32-C3 such as low-power AI emulation eyes, watches, etc. Low-power SoC equipped with RISC-V 32-bit single-core processor, up to 160MHz main frequency, Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) 400KB of Static RAM and 384KB ROM, and 4MB of onboard Flash memory, Onboard 0.71inch LCD display, 160×160 resolution, IPS panel, Built-in batt recharge management circuit, reserved VBAT solder joints, for connecting external Lithium batt power supply Adapting some GPIO solder pads for external expansion applications, Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios Suitable for HMI applications based on the ESP32-C3 such as low-power AI emulation eyes, watches, etc.

Provide online user manual, please check the manual carefully before using 10.1-inch IPS screen with 1024 × 600 resolution. 10-point capacitive touch control, tempered glass panel with the hardness up to 6H When used with Raspberry Pi, it supports Raspberry Pi OS / Ubuntu / Kali and Retropie. When used as a computer monitor, it supports Windows 11/10/8.1/8/7. When used with Tinker Board 2, it supports Android / Debian Ubuntu is supported when used with Jetson Nano. Support common game consoles such as Microsoft XBOX360 and Nintendo switch Support various video input interfaces: HDMI, VGA and AV (CVBS). Support multi-language OSD menu (can be used for power control, adjusting brightness/contrast, etc.)

The display orientation is portrait by default, 1440×2560 resolution (H×V). Change the software config for landscape display. For the moment, only the Raspberry Pi 4B and CM4 have adequate CPU performance to drive this 2K display completely. Support more powerful future versions as long as its GPU performance is equivalent to or better than the Pi 4B. Limited by the hardware, when working with Raspberry Pi 3B+/Pi 3B/Zero 2w/Zero w, only supports default portrait display and cannot be rotated. The case only supports Raspberry Pi 4B. For reference only, Raspberry Pi 4B and CM4 are not included

High-Resolution 4-inch IPS Display (480×480, 65K Colors)​​ – Crisp, vibrant visuals with a wide 160° viewing angle for immersive UIs or data visualization. Dual-Core & Dual-Architecture Flexibility​ – Choose between ​dual ARM Cortex-M33​ (industry-standard) or ​dual RISC-V Hazard3​ cores (up to 150MHz), enabling RISC-V experimentation with robust support. Integrated Peripherals for Rapid Development​ – Built-in ​5-point capacitive touch (optional)​, ​CAN/Rs485/I2C interfaces, ​6-axis IMU (accelerometer + gyroscope)​, ​RTC, and ​TF card slot​ for seamless hardware expansion. Powerful & Expandable​ – ​16MB Flash + 520KB Static RAM, with ​PSRAM solder pads​ for memory upgrades, ​7–36V DC input, and ​Type-C programming​ (USB 1.1 device/host). Versatile Wiring & Low-Power Modes​ – ​Bottom/back wiring terminals​ (DIN rail/embedded-friendly) + ​sleep/dormant modes​ for energy-efficient applications.

RP2350-Touch-LCD-1.46B, with touch control(without protective cover glass), is a high-performance, highly integrated microcontroller development board. Tiny size with onboard 1.46inch capacitive touch IPS screen, RTC chip, 6-axis IMU (3-axis accelerometer and 3-axis gyroscope), TF card slot, and so on, which makes it easy for developing and integrating into the products quickly RP2350B microcontroller chip. Adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz 520KB of Static RAM, 16MB onboard Flash memory. Type-C connector for easier use. Onboard 1.46inch LCD display, 412x412 resolution, 65K color. Supports 5-point touch function controlled via I2C interface, with interrupt support Onboard 3.7V MX1.25 li batt. recharge/discharge header. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. 14 x Multi-Function GPIO Pins 2 x I2C, 2 x UART, 7 x 12-bit ADC and 12 x controllable PWM channels. Accurate clock and timer on-chip. Temperature sensor. 12 x Programmable I/O (PIO) state machines for custom peripheral support

0.96inch LCD Display Modul für Raspberry Pi Pico, 65K RGB Farben, 160×80 Pixel, SPI Schnittstelle

Supports all versions of Raspberry Pi:Supports Raspbian, 10-points touch, driver free; Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free; Supports Retropie, driver free For Jetson Nano,Supports Ubuntu, single point touch, driver free For PC:Supports Windows 10 / 8.1 / 8 / 7, 10-points touch, driver free Support Game Console audio output from earphone jack and speaker header.IPS Panel Up to 10-points touch, depending on the operating system. Up to 6H hardness toughened glass panel. Fully laminated screen, better display experience, dust-proof.

Working with Raspberry Pi, Supports Raspberry Pi OS/Ubuntu/Kali/WIN10 IoT/Retropie. Driver free for USB-C touch. Config file is required for I2C touch Working with Jetson Nano, Supports Ubuntu. Working with Tinker Board 2, Supports Android / Debian. Working as Computer Monitor, Supports Windows 11/10/8.1/8/7 For three hosts (Jetson Nano/Tinker Board 2/PC), only USB-C touch is available Up to 5-points touch, depending on the operating system. Up to 6H hardness toughened glass panel

ESP32-C3 0.71″ LCD Development Board.Integrates GC9D01 display Driver Chip ESP32-C3-LCD-0.71 is a microcontroller development board with 2.4GHz WiFi and Bluetooth BLE 5 support. Onboard 0.71inch LCD display which can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI applications based on the ESP32-C3 such as low-power AI emulation eyes, watches, etc. Application Scenarios.Suitable for HMI applications based on the ESP32-C3 such as low-power AI emulation eyes, watches, etc.

320x240 hardware resolution; Resistive touch control Supports any revision of Raspberry Pi (directly-pluggable); Drivers provided (works with your own Raspbian/Ubuntu/Kali) Supports FBCP software driver as well, allows to config software resolution and set up dual-display; Size perfectly fits the Pi (Raspberry Pi B+/2B/3B/3B+);3 user keys; High quality immersion gold surface plating Combined with the Raspberry Pi, allows you to: Take photos by touching (up to 17 camera modes);Use software keyboard (system interaction without keyboard/mouse)

[When used for Raspberry Pi] compatible with Raspberry Pi OS, 5-point touch, driver free; compatible with Ubuntu / Kali/ WIN10 IoT, single point touch, driver free; compatible with Retropie, driver free. Supports Pi 5/4B/3B+/3A+/3B/2B/B+/A+/CM3/3+/4, but some CM3/3+/4 base boards require extra adapter cable [When used for VisionFive2] compatible with Debian, single point touch, driver free. [When used for Core3566] compatible with Debian/Ubuntu, 5-point touch, driver free [IPS Display Panel]Excellent Display Performance With 170° Wide Viewing Angle. [Display Color Is More Vivid]Better Visual Experience With More Color Details On The Screen. [High Quality Picture , Clear and Bright]New Generation IPS LCD Screen With More Natural Gradual Color Change. [Capacitive 5-Point Touch]up to 5-point touch, depending on the operating system. Up to 6H hardness toughened glass panel. [Adjustable Brightness Via Software]

ESP32-S3-Touch-LCD-1.47(Standard version, without pinheader) uses ESP32-S3R8 chip with 2.4GHz WiFi and BTBLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 1.47inch IPS display can smoothly run GUI programs such as LVGL Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (LE), with onboard antenna. Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Onboard 1.47inch capacitive touch LCD display, 172x320 resolution, 262K color. Adapting multiple IO interfaces, supports full-speed USB standard Onboard TF card slot for external TF card storage of pictures or files. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

ESP32-C6-Touch-LCD-1.47(Standard version, without pinheader) uses ESP32-C6FH8 chip with 2.4GHz WiFi 6 and BT BLE 5 support, integrates 8MB Flash, Onboard 1.47inch IPS display can smoothly run GUI programs such as LVGL. It is suitable for the quick development of the HMI and other ESP32-C6 applications Equipped with a high-performance 32-bit RISC-V processor with clock speed up to 160 MHz, and a low-power 32-bit RISC-V processor with clock speed up to 20MHz Supports 2.4GHz Wi-Fi 6 (802.11 ax/b/g/n) and BT 5 (LE), with onboard antenna. Built-in 320KB ROM, 512KB HP SRAM, and 16KB LP SRAM, integrates 8MB Flash Onboard 1.47inch capacitive touch LCD display, 172x320 resolution, 262K color. Adapting multiple IO interfaces, supports full-speed USB standard Onboard TF card slot for external TF card storage of pictures or files. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

Hardware resolution: 1920×1200 Toughened glass panel features 6H hardness and 10-Points capacitive touch Fully Laminated for batter touching When working with Raspberry PI, supports Raspbian/ Ubuntu/ Retropie, driver free.When working with Jetson Nano.Supports Ubuntu, single point touch, driver free When working with PC, supports Windows 10/ 8.1/ 8/ 7, 10-Points touch and driver free. Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc. Features 3.5mm Headphone jack for HDMI audio Embedded ferrite Hi-Fi speaker 75x75mm spacing mounting holes (M4 screw hole) for general wall mount Comes with 75° tilt angle stand

ESP32-C6-Touch-LCD-1.47-M(With black pre-soldered header) uses ESP32-C6FH8 chip with 2.4GHz WiFi 6 and BT BLE 5 support, integrates 8MB Flash, Onboard 1.47inch IPS display can smoothly run GUI programs such as LVGL. It is suitable for the quick development of the HMI and other ESP32-C6 applications Equipped with a high-performance 32-bit RISC-V processor with clock speed up to 160 MHz, and a low-power 32-bit RISC-V processor with clock speed up to 20MHz Supports 2.4GHz Wi-Fi 6 (802.11 ax/b/g/n) and BT 5 (LE), with onboard antenna. Built-in 320KB ROM, 512KB HP SRAM, and 16KB LP SRAM, integrates 8MB Flash Onboard 1.47inch capacitive touch LCD display, 172x320 resolution, 262K color. Adapting multiple IO interfaces, supports full-speed USB standard Onboard TF card slot for external TF card storage of pictures or files. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

5inch IPS screen. 800x480 hardware resolution. Capacitive touch panel, support 5-point touch.DSI interface, refresh rate up to 60Hz. Tempered glass capacitive touch panel, hardness up to 6H. Supports Pi 4B/3B+/3A+/3B/2B/B+/A+. Another adapter board CM-DSI-ADAPTER is required for CM3/3+/4. When used with Raspberry Pi, support Raspberry Pi OS / Ubuntu / Kali and Retropie, driver free. Supports software control of backlight brightness.

4inch Touch LCD Schild für Arduino

4.3inch,HDMI interface, 800x480, IPS, capacitive touch LCD,Supports Multi mini-PCs, Multi Systems Supports popular mini PCs such as Raspberry Pi, Jetson Nano,BB Black, Banana Pi, as well as general desktop computers When works with Raspberry Pi,such as RPi3 B,Raspberry Pi 3 Model A+ or Model B+ , supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 3.5mm audio jack, speaker connector, supports HDMI audio output

High-Performance Dual-Core Design: Features the RP2350A microcontroller chip with a unique dual-core architecture, combining an Arm Cortex-M33 and a Hazard3 RISC-V processor, running up to 150 MHz for enhanced performance. Compact and Feature-Rich: A small-sized MCU board with an onboard 1.47-inch LCD display (172×320 resolution, 262K colors), TF card slot, and built-in RGB LED, ideal for fast product development and integration. Ample Memory: Includes 520KB SRAM and 16MB of onboard Flash memory for efficient data storage and processing, supporting your development needs. Modern Connectivity and Power Efficiency: Equipped with a Type-C connector (for Type-C version), USB 1.1 support, and low-power sleep and dormant modes for energy-efficient operation. Easy Development and Versatile Features: Supports drag-and-drop programming via USB mass storage, features an accurate clock and timer, onboard temperature sensor, and RGB LED for customizable lighting effects. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.

Compact 3.5-inch Display: The 3.5-inch DSI LCD features a compact form factor suitable for various projects, making it an ideal choice for embedded systems and portable devices. Its small size allows for convenient integration without taking up too much space. High-Resolution Display: With a resolution of 480x320 pixels, this LCD offers clear and vibrant visuals, ensuring that images and text are displayed crisply. The screen provides a decent pixel density, enhancing the overall user experience for applications that require detailed visuals. Touchscreen Functionality: This display includes an integrated capacitive touchscreen, enabling intuitive interaction and user input through gestures. The responsive touchscreen enhances user engagement, making it suitable for applications such as DIY projects, kiosks, and educational tools. DSI Interface Compatibility: Designed for easy connectivity, the DSI (Display Serial Interface) makes this LCD compatible with a range of devices, particularly Raspberry Pi boards. This facilitates straightforward integration into existing projects or systems, streamlining setup and implementation. Versatile Applications: The 3.5-inch DSI LCD is suitable for various applications including embedded systems, gaming consoles, home automation displays, and educational platforms. Its flexibility allows developers to leverage its capabilities across different fields, from hobbyist projects to more complex industrial applications.

ESP32-S3 1.54inch Touch LCD display development board,Supports AI Speech Interaction, Online LLM Platforms, And DIY Customization Small Size, Touch More Possibilities.Suitable For Various Smart Device Development, and Can Realize Human-Computer Interaction Function. Supports connecting to a Batt for independent operation IPS Display Panel.Excellent display performance, 262K color, 240 × 240 resolution, with wide viewing angle Wi-Fi and BLE 5 support.ESP32-S3 integrates 2.4 GHz Wi-Fi (802.11 b/g/n) with 40 MHz of bandwidth support, Its Bluetooth Low Energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh Supports ESP-IDF, Arduino IDE.Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

Dual-Core Processor Architecture: The RP2350 microcontroller features a unique dual-core design, combining an Arm Cortex-M33 processor and a Hazard3 RISC-V processor. This allows for flexible performance with a clock speed of up to 150 MHz, offering high efficiency and low power consumption for various applications. Large Memory and Storage: Equipped with 520KB Static RAM and 16MB onboard Flash memory, the RP2350-Touch-LCD-2 offers ample space for program storage and data processing, making it suitable for memory-intensive tasks and complex applications. Touch Display and Camera Interface: The board features an onboard 2-inch capacitive touch display with a 240 × 320 resolution and 262K colors, ideal for interactive projects. Additionally, it includes a camera interface compatible with popular cameras like the OV2640 and OV5640, allowing for easy image and video capture. Versatile Connectivity and Expansion: With support for USB 1.1 (device and host), Type-C connectivity, and a variety of I/O options (22 × GPIO pins, 2 × SPI, 2 × I2C, 2 × UART, 2 × ADC channels, 14 × PWM), this board offers extensive expansion possibilities for custom applications and peripheral integration. Low Power and Efficient Design: The RP2350-Touch-LCD-2 supports low-power sleep and dormant modes, ensuring energy efficiency in portable devices. It also features a Lithium batt recharge/discharge header, making it suitable for mobile applications. Drag-and-drop programming via mass storage over USB simplifies the development process. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.

Waveshare 15.6inch Capacitive Touch Screen LCD (H) with Case 1920×1080 Resolution HDMI IPS Display Supports All Versions of Raspberry Pi Jetson Nano PC Game Console

Supports Raspbian, 5-points touch, driver free Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free Supports Retropie, driver free Supports all versions of Raspberry Pi Jetson Nano:Supports Ubuntu, single point touch, driver free Supports Windows 10 / 8.1 / 8 / 7, 5-points touch, driver free

7inch IPS screen,1024x600 hardware resolution, configurable by software (up to 1920x1080) 7Zoll Mini Bildschirm Toughened glass capacitive touch panel, 6H hardness Supports popular mini PCs such as Raspberry Pi,Jetson Nano,BB Black, Banana Pi, as well as general desktop computers.When works with Raspberry Pi, supports Raspbian, 5-points touch, driver free;supports Ubuntu, WIN10 IOT, single point touch, and driver free.When works with PC, supports Windows 10/8.1/8/7, five-points touch, and driver free. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 3.5mm audio jack, supports HDMI audio output

Compatible with Raspberry Pi Compute Module 4.Personal Network Storage Server.Built-In dual hard drive slots,support large capacity HDD storage.Video cache speed 113MB/s,100 music transmission time 40 seconds.(The actual transmission speed depends on the network speed ,the above data was tested with a Gigabit network). All-in-one Mini-Computer, mainly designed for home or small home office, but not limited to the above applications.Out of the box, no expert knowledge of networking and storage systems required.Easy to use, convenient to online access the documents, videos, and music at any time. Built-in 2x SATA slots for installing 2.5-inch Solid State Drives.2-inch SPI LCD screen for real-time monitoring the working status of CM4: CPU, RAM, system disk usage, network speed and temperature, etc. Rich interfaces.Aluminum alloy case design,alloy case for large area heat dissipation, with fan vents and nonskid feet at the bottom, better heat dissipation and more stable placement. Precise cut-out with clear label,each cut-out is completely aligned with the connector.

ESP32-S3-Touch-LCD-1.47-M(With black pre-soldered header) uses ESP32-S3R8 chip with 2.4GHz WiFi and BTBLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 1.47inch IPS display can smoothly run GUI programs such as LVGL Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (LE), with onboard antenna. Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Onboard 1.47inch capacitive touch LCD display, 172x320 resolution, 262K color. Adapting multiple IO interfaces, supports full-speed USB standard Onboard TF card slot for external TF card storage of pictures or files. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

The display orientation is portrait by default, 480×640 resolution (H×V). Change the software config for landscape display. Supports Raspberry Pi OS / Ubuntu / Kali / WIN10 IoT / Retropie. Driver free for USB-C touch. Config file is required for I2C touch. For Jetson Nano and PC, only USB-C touch is available Supports all versions of Raspberry Pi. Supports Windows 11 / 10 / 8.1 / 8 / 7