waveshare e ink display

2.66inch e-Paper E-Ink Display Modul für Raspberry Pi Pico, 296x152 Pixel, Schwarz / Weiß, SPI Schnittstelle Teilweise Refresh-Unterstützung, geringer Stromverbrauch, breiter Betrachtungswinkel, papierähnlicher Effekt. Ideal für Preisschilder, Regaletiketten, industrielle Instrumente... - Größe: 2,66" - Auflösung: 296x152 - Betrachtungswinkel: >170° - Displayfarbe: Schwarz und Weiß - Graustufen: 2 - Kommunikation: SPI - Anzeigefeld: E-Paper - Erlebnis: Papierähnlich - Komfortabel lesen: Augenschonend, kein Blaulicht - Umgebung: Umgebungslicht erforderlich - Anzeigetyp: Passiv-reflektierend - Stromverbrauch: Ultra Low - Anzeigedauer: Hält ohne Strom an - Auffrischung: Partielle Auffrischungsunterstützung Spezifikationen - Betriebsspannung: 3,3V - Displayfarbe: schwarz, weiß - Schnittstelle: 3-Draht-SPI, 4-Draht-SPI - Grauskala: 2 - Außenmaße: 74,00 x 37,50mm - Teilweise Aktualisierungszeit: 0,3s - Anzeigegröße: 60.088 x 30.704mm - Vollständige Aktualisierungszeit: 5s - Punktabstand: 0,203 x 0,202mm - Auffrischungsleistung: 4

7.5inche-PaperE-InkDisplay Modul (B) für Raspberry Pi Pico, 800x480 Pixel, Rot / Schwarz / Weiß, SPI SchnittstelleGröße: 7,5"Auflösung: 800x480Betrachtungswinkel: >170°Displayfarbe: Rot / Schwarz / WeißGraustufen: 2Kommunikation: SPIAnzeigefeld: E-PaperErlebnis: PapierähnlichKomfortables Lesen: Augenschonend, kein BlaulichtUmgebung: Umgebungslicht erforderlichAnzeigetyp: Passiv-reflektierendStromverbrauch: Sehr niedrigAnzeigedauer: Hält ohne Strom anFeaturesKeine Hintergrundbeleuchtung, zeigt den letzten Inhalt für eine lange Zeit an, auch wenn der Strom abgeschaltet istUltra niedriger Stromverbrauch, Strom wird im Grunde nur für die Auffrischung benötigtSPI-Schnittstelle, erfordert minimale IO-Pins2x Benutzertasten und 1x Reset-Taste für einfacheKommt mit Entwicklungsressourcen und Handbuch (Raspberry Pi Pico C/C++ und MicroPython Beispiele)SpezifikationenSpezifikationDetailsBetriebsspannung3.3V / 5VDisplayfarbeRot, Schwarz, WeißSchnittstelle3-Draht SPI, 4-Draht SPIGraustufen4Abmessungen170.2mm × 111.2mmVolle Aktualisierun

RESOLUTION:296×128 pixels,OPERATING VOLTAGE 3.3V/5V,GREY SCALE:2,FULL REFRESH TIME:15s No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing Onboard voltage translator, compatible with 3.3V / 5V MCUs SPI interface, requires minimal IO pins Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples). Raspberry Pi Pico is NOT included.

7,5-Zoll-E-Paper-E-Ink-Anzeigemodul für Raspberry Pi Pico, 800 x 480 Pixel, Schwarz/Weiß, SPI-Schnittstelle. Geringer Stromverbrauch, großer Betrachtungswinkel, papierähnlicher Effekt ohne Strom. Ideal für Preisschilder, Regaletiketten, Industrieinstrumente.Größe: 7,5"Auflösung v800x480Betrachtungswinkel: >170°Anzeigefarbe: Schwarz/WeißGraustufen: 2Kommunikation: SPIAnzeigefeld: E-PaperErfahrung: PapierartigAngenehmes Lesen: Augenpflege, kein BlaulichtUmgebung: Umgebungslicht erforderlichAnzeigetyp: Passiv reflektierendStromverbrauch: Extrem niedrigAnzeigedauer: Bleibt ohne Strom bestehenFunktionenKeine Hintergrundbeleuchtung, der letzte Inhalt wird auch bei ausgeschaltetem Gerät noch lange angezeigtExtrem geringer Stromverbrauch, Strom wird grundsätzlich nur zum Auffrischen benötigtSPI-Schnittstelle, erfordert minimale IO-Pins2x Benutzertasten und 1x Reset-Taste für einfacheSpezifikationenBetriebsspannung: 3,3 VAnzeigefarbe: Schwarz, WeißAuflösung: 800x480 PixelGraustufen: 2Schnittstelle: 3-Draht-SPI, 4-Draht-SPIBetrachtun

2.13inch e-Paper E-Ink Display Modul (B) für Raspberry Pi Pico, 212x104 Pixel, Rot / Schwarz / Weiß, SPI SchnittstelleNiedriger Stromverbrauch, großer Betrachtungswinkel, papierähnlicher Effekt. Ideal für Preisschilder, Regaletiketten, industrielle Instrumente...Größe: 2,13"Auflösung: 212x104Betrachtungswinkel: >170°Anzeigefarbe: Rot / Schwarz und WeißGraustufen: 2Kommunikation: SPIAnzeigefeld: E-PaperErlebnis: PapierähnlichKomfortabel lesen: Augenschonend, kein BlaulichtUmgebung: Umgebungslicht erforderlichAnzeigetyp: Passiv-reflektierendStromverbrauch: Ultra LowAnzeigedauer: Hält ohne Strom anMerkmaleKeine Hintergrundbeleuchtung, zeigt den letzten Inhalt für eine lange Zeit an, auch wenn der Strom abgeschaltet istUltra niedriger Stromverbrauch, Strom wird im Grunde nur für das Auffrischen benötigtSPI-Schnittstelle, erfordert minimale IO-PinsKommt mit Entwicklungsressourcen und Handbuch (Raspberry Pi Pico C/C++ und MicroPython Beispiele)SpezifikationenBetriebsspannung: 3,3VAnzeigefarbe: rot, schwarz, weißSchnittstelle: 3-D

RESOLUTION:480×280 pixels,OPERATING VOLTAGE 3.3V/5V,GREY SCALE:4,FULL REFRESH TIME:3s,PARTIAL REFRESH TIME:0.3s No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing SPI interface, requires minimal IO pins. Onboard voltage translator, compatible with 3.3V / 5V MCUs Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs Comes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Waveshare E-Ink-Farb-Display ohne HAT, 7.3 Zoll, 800x480, Spectra 6, SPI, 3,3V Das 7,3 Zoll E Ink Spectra 6 (E6) Full Color E-Paper Display ist eine energieeffiziente und hochauflösende Lösung für verschiedene Anwendungsbereiche, bei denen eine Papier-ähnliche Anzeige benötigt wird. Es bietet eine Auflösung von 800 × 480 Pixeln und ermöglicht die Darstellung von Farben in hoher Sättigung und Kontrast. Das Display verwendet die E Ink Spectra 6 Technologie, die es ermöglicht, Farben in Rot, Gelb und Blau anzuzeigen und eine ausgezeichnete Bildqualität zu liefern. Das Display benötigt keine Hintergrundbeleuchtung, da es die Inhalte durch Reflexion von Umgebungslicht darstellt und auch nach dem Ausschalten weiterhin anzeigt. Die geringe Leistungsaufnahme macht es besonders für Anwendungen geeignet, bei denen eine ständige Stromversorgung nicht erforderlich ist.

Waveshare E-Ink-Farb-Display, 4 Zoll, 600x400, Spectra 6, SPI, ohne Treiber-Board, 3,3V Das 4-Zoll-E-Paper-Display nutzt die E Ink Spectra 6-Technologie, die eine farbige und papierähnliche Anzeige ermöglicht. Mit einer Auflösung von 600 × 400 Pixeln bietet das Display eine klare Darstellung mit hohem Kontrast und lebendigen Farben. Die Anzeige arbeitet passiv reflektierend, indem Umgebungslicht genutzt wird, wodurch eine Hintergrundbeleuchtung überflüssig wird. Strom wird nur für die Aktualisierung des angezeigten Inhalts benötigt, was den Energieverbrauch erheblich reduziert. Das Display ist geeignet für Anwendungen wie Preisschilder, Regalbeschriftungen und industrielle Instrumente. Sollte eine zusätzliche Lichtquelle für die Nutzung unter schlechten Lichtverhältnissen erforderlich sein, empfehlen wir das

RESOLUTION:212×104 pixels,OPERATING VOLTAGE 3.3V,GREY SCALE:2,FULL REFRESH TIME:2s,PARTIAL REFRESH TIME:0.3s No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing. SPI interface, requires minimal IO pins. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples). Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags.

RESOLUTION:250x122 pixels,OPERATING VOLTAGE 3.3V,GREY SCALE:2,FULL REFRESH TIME:15s No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, requires minimal IO pins Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples). Raspberry Pi Pico is NOT included.

Waveshare E-Ink-Farb-Display HAT+ (E), 4 Zoll, 600x400, Spectra 6, SPI, mit Treiber-Board, 3,3/5V Das 4-Zoll-E-Ink-Spectra-6-Display bietet eine innovative farbige E-Paper-Technologie mit einer Auflösung von 600 × 400 Pixeln. Es nutzt die fortschrittliche E Ink Spectra 6 (E6) Technologie, die durch hohe Farbkontraste und gesättigte Farben besticht. Dieses Display arbeitet ohne Hintergrundbeleuchtung und benötigt nur während des Bildwechsels Strom. Nach dem Abschalten bleibt das zuletzt angezeigte Bild erhalten, was es besonders energieeffizient macht. Das Display ist ideal für Anwendungen wie Preisschilder, Regaletiketten und industrielle Instrumente. Das Display ist passiv reflektierend, was bedeutet, dass es Umgebungslicht zur Darstellung nutzt und unter natürlichem Licht oder Lampenlicht klare Bilder und Texte liefert. Sollte eine zusätzliche Lichtquelle für die Nutzung unter schlechten

Large Display Area: The 10.85-inch screen provides a large area for displaying content, ideal for applications that require more space, such as digital signage and electronic shelf labels. Four-Color Capability: With support for four colors—black, white, red, and yellow—the display offers enhanced clarity and flexibility for creating colorful, readable content. Ultra-Low Power Consumption: Utilizing e-ink technology, this display only consumes power when the content is refreshed, allowing it to maintain the content for extended periods without power. Wide Viewing Angle: The e-Paper HAT+ ensures excellent visibility from multiple angles, thanks to its wide viewing angle of up to 170°, which is crucial for applications in public or shared spaces. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

Please note that The batt And Jetson nano Developerment Kit B01 are NOT included and the batt length SHOULD be less than 67mm, some batt with protection plate are NOT supported Suitable For High School AI Teaching / Professional Racing High Performance Autonomous AI Racing Car: Interactive Webpage Programming, High Frame Rate Processing Through Torch2trt (PyTorch To TensorRT Translator) Optimizing, Easy To Achieve Faster Autonomous Selft Driving DonkeyCar Open Source Project:JetRacer Pro Also Supports DonkeyCar Open Source Project. DonkeyCar Utilizes Deep Learning Neural Network Framework Keras/TensorFlow, Together With Computer Vision Library OpenCV, To Achieve Self Driving. Deep Learning, Autonomous Driving,Rechargeable, batt Voltage Monitor, No Messy Wiring, Simple Assembly

Waveshare 2.13inch e-paper HAT with standard RPi 40PIN GPIO extension header, fits Raspberry Pi series boards, Jetson Nano The 2.13inch E-ink Display HAT for Raspberry Pi has no backlight, keeps displaying last content for a long time even when power down The 2.13 inch e-paper with SPI interface, for connecting with other controller boards like Ardui/Nucleo, etc. The waveshare epaper display with onboard voltage translator, compatible with 3.3V/5V MCUs Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Ardui/STM32), feel free to contact us if you need technical support.

Raw E-paper Only. Doesn't include driver board. No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Supported driver boards for raw display: e-Paper Driver HAT, e-Paper ESP32 Driver Board, e-Paper ESP8266 Driver Board, e-Paper Shield Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W Comes with development resources and manual (examples for Raspberry Pi)

Waveshare E-Ink-Farb-Display mit HAT 7.3 Zoll, 800x480, Spectra 6, SPI, 3,3V Das Waveshare 7.3 Zoll E Ink Spectra 6 Full Color E-Paper Display ermöglicht eine farbige und stromsparende Anzeige. Es nutzt die E Ink Spectra 6-Technologie, die hohe Kontraste, gesättigte Farben und eine hohe Auflösung bietet. Das Display benötigt keine Hintergrundbeleuchtung und hält den zuletzt angezeigten Inhalt auch ohne Stromzufuhr aufrecht. Durch die hohe Betrachtungswinkelstabilität bleibt die Anzeige aus nahezu jeder Perspektive sichtbar. Das Display unterstützt verschiedene Anwendungen, darunter Preisschilder, Regaletiketten und industrielle Messgeräte. Es wird über eine SPI-Schnittstelle angesteuert und ist kompatibel mit Raspberry Pi, Jetson Nano, RDK X3, Arduino und STM32. Der Betrieb erfolgt mit einer niedrigen Leistungsaufnahme, da Energie nur während des Bildwechsels benötigt wird. Die

2.9-inch e-paper module with 296x128 resolution for clear text and graphics display. Features ultra-low power consumption, ideal for long-term standby applications. Supports partial refresh function to reduce power usage and update content quickly. Communicates via SPl interface, easy to connect with mainstream development boards. No backlight needed, readable in sunlight, suitable for smart labels and loT devices

Compact e-Paper Display: The 3.7-inch e-paper screen offers a resolution of 480x280 pixels, providing clear and crisp text and images with high contrast and low power consumption. Versatile Use: Ideal for applications like electronic shelf labels, digital signage, and information displays, it supports grayscale and can hold images without requiring constant power, making it perfect for energy-efficient projects. SPI Interface: The e-Paper HAT Plus G utilizes a 3-wire SPI interface, making it compatible with devices such as Raspberry Pi, Jetson Nano, and other microcontrollers, allowing easy integration. Low Power: One of the main advantages of this display is its ultra-low power consumption, which significantly reduces energy usage, especially in batt-powered devices. Wide Compatibility: Compatible with both Windows 10/11 and Linux operating systems, ensuring smooth integration with different platforms for personal and professional use. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

4.2inch E-Paper Display, Raw Display Without e-Paper Driver Board No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/STM32)

Compact e-Paper Display: The 3.7-inch e-paper screen offers a resolution of 480x280 pixels, providing clear and crisp text and images with high contrast and low power consumption. Versatile Use: Ideal for applications like electronic shelf labels, digital signage, and information displays, it supports grayscale and can hold images without requiring constant power, making it perfect for energy-efficient projects. SPI Interface: The e-Paper HAT Plus G utilizes a 3-wire SPI interface, making it compatible with devices such as Raspberry Pi, Jetson Nano, and other microcontrollers, allowing easy integration. Low Power: One of the main advantages of this display is its ultra-low power consumption, which significantly reduces energy usage, especially in batt-powered devices. Wide Compatibility: Compatible with both Windows 10/11 and Linux operating systems, ensuring smooth integration with different platforms for personal and professional use. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

No Backlight, Persistent Display: The display does not require a backlight and retains the last content for an extended period, even after power is turned off. Ultra Low Power Consumption: The display is extremely energy-efficient, with power being consumed only for refreshing the content, making it ideal for low-power applications. Easy to Integrate: It comes with comprehensive online development resources and a manual, including e-Paper Driver HAT circuit diagrams and example code for Raspberry Pi, Jetson Nano, Arduino, and STM32. Supports Multiple Platforms: The display is compatible with a wide range of platforms, thanks to the provided development examples and circuit diagrams, ensuring easy integration with popular hardware. Efficient for Embedded Projects: With low power consumption and the ability to maintain static content without constant power, this display is well-suited for embedded systems and long-duration applications. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.

Compact 3.5-inch E-Ink Display: The Waveshare 3.5-inch E-Paper Module (G) offers a compact and high-quality display, with a resolution of 384×184 pixels, perfect for small devices where space is limited but clear visuals are still necessary. It’s well-suited for projects requiring portable and energy-efficient screens. Low Power Consumption with Retained Images: Utilizing E-Ink technology, the module only requires power during refresh cycles. Once the content is displayed, it maintains the image without additional power consumption, making it an excellent choice for batt-powered applications like e-readers or solar-powered projects. Four-Color Display: Red, Yellow, Black, and White: This module supports a 2-bit color scheme, providing a rich display of red, yellow, black, and white. The color flexibility enhances readability and is ideal for creating visually engaging content, such as simple graphics, charts, or notifications. Wide Viewing Angle and Anti-Glare Coating: The display offers an impressive wide viewing angle of 170° and an anti-glare coating, ensuring excellent visibility from various angles and under various lighting conditions. This makes it suitable for use in both indoor and outdoor applications where the display is exposed to bright light. Easy Integration with Popular Platforms: With an SPI interface, the Waveshare 3.5-inch E-Paper Module is compatible with a range of popular platforms, including Raspberry Pi, Arduino, and other microcontrollers. This versatility ensures easy integration into projects, whether for educational purposes, prototypes, or commercial applications. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

No Backlight, Persistent Display: The e-paper display retains the last content for an extended period, even without power, thanks to its unique no-backlight technology. Ultra-Low Power Consumption: With minimal power requirements, the display only uses power when refreshing, making it highly energy-efficient. Long-Lasting Display: Designed for extended use, the e-paper display can maintain its image for a long time without needing constant power. Comprehensive Development Resources: Includes online resources, manuals, and circuit diagrams to help developers integrate easily with Raspberry Pi, and STM32. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

No backlight, keeps displaying last content for a long time even when power down Low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards USB/SPI/I80/I2C interface, for connecting with host boards like Raspberry Pi/Nucleo, etc. Comes with development resources and manual (examples for Raspberry Pi/STM32),download link: www.waveshare.com/wiki/7.8inch_e-Paper_HAT

2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels,Supports waken up by user-defined gesture No backlight, keeps displaying last content for a long time even when power down,Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards,SPI interface, for connecting with controller boards like Arduino/STM32, etc. SPI interface, for connecting with controller boards like Arduino/STM32, etc.

2.9inch capacitive touch ePaper module, 296×128 resolution. 5-points touch support, user-defined wakeup gesture. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Reversed control interface, for connecting with controller boards like STM32, etc. Comes with development resources and manual (examples for Raspberry Pi).

2PCS Version, Provide online user manual, please check the manual carefully before using! IMPORTANT: Rev2.1 is the version of the driver board, which is independent of the screen version. Currently, there is only Rev2.1; QC target V3 and V4 are screen versions, and V4 is currently being shipped. V4 version is fully compatible with V3; and it provides the demo that can realize a fast refreshing function. This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs

1.54inch e-Paper Module (G), with driver board No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Can provide with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino) Comes with e-Paper driver board: Adapting SPI interface for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs