waveshare lcd

Working with Raspberry Pi, Supports Raspberry Pi OS/Ubuntu/Kali/WIN10 IoT/Retropie. Driver free for USB-C touch. Config file is required for I2C touch Working with Jetson Nano, Supports Ubuntu. Working with Tinker Board 2, Supports Android / Debian. Working as Computer Monitor, Supports Windows 11/10/8.1/8/7 For three hosts (Jetson Nano/Tinker Board 2/PC), only USB-C touch is available Up to 5-points touch, depending on the operating system. Up to 6H hardness toughened glass panel

Supports Raspberry Pi and can also be used as a computer monitor. Up to 10-point touch, depending on the operating system. Up to 6H hardness toughened glass panel. 3) Optical Bonding screen, better display experience, dust-proof. Toughened glass capacitive touch panel, 6H hardness.Comes with a 75° tilt angle stand. When working with Raspberry Pi, it supports Raspberry Pi OS / Ubuntu / Kali and Retropie, single touch, and driver free. When working as a computer monitor, it supports Windows 11/10/8.1/8/7, 10-point touch, and driver free. Also supports VGA input (specific cable is required and should be purchased separately).

The ESP32-S3-DualEye-Touch-LCD-1.28 is an AIoT microcontroller development board based on ESP32-S3 with double eye LCD displays, designed for makers and electronics enthusiasts, supporting 2.4GHz Wi-Fi and BT BLE 5 It integrates high-capacity Flash and PStatic RAM, onboard dual 1.28inch LCD displays which can smoothly run GUI programs such as LVGL Additionally, it also integrates a microphone, speaker header, Li batt recharge circuit, and reserves a TF card slot and DIY expansion connectors It is suitable for the quick development based on ESP32-S3 such as HMI (Human-Machine Interface), double eye robotic agents, and AI voice-interactive device Whether you want to build a robot that can "wink", create an intelligent IoT Interface, design touch-controlled games, or develop futuristic wearable devices, this board is an ideal choice

The ESP32-S3-LCD-1.47B features a high-performance Xtensa 32-bit LX7 dual-core processor, running at up to 240MHz, ideal for advanced HMI applications. It supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) with an onboard antenna, ensuring reliable wireless connectivity. The board is equipped with 512KB SRAM, 384KB ROM, 16MB Flash, and 8MB PSRAM, providing sufficient storage for efficient operation and program execution. It includes a 1.47-inch LCD display with 172×320 resolution and 262K colors, alongside a 6-axis IMU for motion sensing and gesture detection. The ESP32-S3-LCD-1.47B features multiple I/O interfaces, a TF card slot for external storage, a batt charging module, and low-power modes for versatile and efficient use in various scenarios.

Supports all versions of Raspberry Pi:Supports Raspbian, 10-points touch, driver free; Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free; Supports Retropie, driver free For Jetson Nano,Supports Ubuntu, single point touch, driver free For PC:Supports Windows 10 / 8.1 / 8 / 7, 10-points touch, driver free Support Game Console audio output from earphone jack and speaker header.IPS Panel Up to 10-points touch, depending on the operating system. Up to 6H hardness toughened glass panel. Fully laminated screen, better display experience, dust-proof.

ESP32-Touch-LCD-3.5-EN, Standard version, without Lithium Batt. Equipped with High-performance ESP32 Xtensa 32-bit LX6 single-core / dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (IEEE 802.11b/g/n) and BT V4.2 full specification, including traditional BT (BR/EDR) and BT Low Energy (BLE), with onboard antenna Built-in 520KB of Static RAM and 448KB ROM, with onboard 2MB PSratic RAM and an external 16MB Flash memory. Onboard USB Type-C port for power supply, program downloading, and debugging, easier to use Onboard 3.5inch capacitive touch IPS display for clear color picture display, 320 x 480 resolution, 262K color. Built-in ST7796 display driver and FT6336 capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources Onboard PCF85063 RTC chip, powered by Lithium batt. through AXP2101 chip, with reserved RTC batt. header for connecting a backup batt., ensuring RTC function during the replacement of the main batt. Onboard PWR and BOOT programmable buttons for easy custom function development. Onboard 3.7V MX1.25 Lithium Batt. recharge/discharge header. Adapting I2C, UART, USB and multiple GPIOs for external device connection and debugging, enabling flexible peripheral configuration. Onboard TF card slot for extended storage, supports external TF card for storing images or files. Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, batt. charging, batt. management, and batt. life optimization, etc.

Integrated LCD Screen, TF Card Slot, Boot Button and Other Peripheral interfaces Suitable For Applications Such As Wireless USB Flash Drive, USB WiFi/Bluetooth, USB Dongle Based On ESP32-S3 Adopts ESP32-S3R2 chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz Built in 512KB SRAM, 384KB ROM, 2MB of on-chip PSRAM, and onboard 16MB Flash memory Onboard 1.14inch 240×135 pixels 65K color IPS LCD display Integrated 2.4GHz WiFi and Bluetooth LE wireless communication WiFi supports Infrastructure BSS in Station, SoftAP, and Station + SoftAP modes WiFi supports 1T1R mode with data rate up to 150 Mbps Bluetooth supports high power mode (20dBm) Internal co-existence mechanism between Wi-Fi and Bluetooth to share the same antenna Onboard 3PIN UART port, 3PIN GPIO header and 4PIN I2C port Equipped with plastic case and cables Provides online open-source demo and resources, more convenient for learning and development

7inch IPS screen,1024x600 hardware resolution, configurable by software (up to 1920x1080) 7Zoll Mini Bildschirm Toughened glass capacitive touch panel, 6H hardness Supports popular mini PCs such as Raspberry Pi,Jetson Nano,BB Black, Banana Pi, as well as general desktop computers.When works with Raspberry Pi, supports Raspbian, 5-points touch, driver free;supports Ubuntu, WIN10 IOT, single point touch, and driver free.When works with PC, supports Windows 10/8.1/8/7, five-points touch, and driver free. Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 3.5mm audio jack, supports HDMI audio output raspberry pi 4 4b display ips monitor tft portable touchscreen raspberry zero 3 windows 10 banana pi hd 800 touch monitor 7inch zoll bildschirm touch rpi screen pi4 Pi4B HDMI screen

Hardware resolution: 1920×1200 Toughened glass panel features 6H hardness and 10-Points capacitive touch Fully Laminated for batter touching When working with Raspberry PI, supports Raspbian/ Ubuntu/ Retropie, driver free.When working with Jetson Nano.Supports Ubuntu, single point touch, driver free When working with PC, supports Windows 10/ 8.1/ 8/ 7, 10-Points touch and driver free. Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc. Features 3.5mm Headphone jack for HDMI audio Embedded ferrite Hi-Fi speaker 75x75mm spacing mounting holes (M4 screw hole) for general wall mount Comes with 75° tilt angle stand raspberry pi screen hdmi lcd jetson nano pc 10.1inch ips display capacitive touch monitor

Multi-Functional AI Voice Control​ – Integrate voice commands seamlessly for hands-free operation, boosting productivity and smart interaction. 20×0.85" Mechanical LCD Macro Keys​ – Customizable backlit keys with individual LCD screens for dynamic labeling, ideal for gaming, coding, or workflow automation. 2.8" Secondary Display​ – Supplementary screen shows real-time status, shortcuts, or system info, enhancing multitasking efficiency. Dual High-Precision Knobs​ – Adjustable dials for volume, brightness, or parameter control with tactile feedback—perfect for precise adjustments. Linux + QMK Dual-System Support​ – Flexible firmware options (QMK for customization, Linux for compatibility) to tailor functionality to your needs.

High-Performance Dual-Core Processor – Powered by the ESP32-S3R8 chip with a 240MHz Xtensa 32-bit LX7 dual-core processor, ensuring fast and efficient performance for HMI applications. Wireless Connectivity – Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) with an onboard antenna for seamless wireless communication Ample Memory & Storage – Features 512KB Static RAM, 384KB ROM, 8MB PSRAM, and 16MB Flash, along with a TF card slot for additional storage. Rich Onboard Peripherals – Includes a 1.9-inch LCD (170×320 resolution), a QMI8658 6-axis IMU (accelerometer + gyroscope), and a USB Type-C port for power and debugging. Strong Expandability – Equipped with a Pico-compatible interface, Onboard 3.7V MX1.25 lithium batt charge and discharge interface, and multiple GPIO pins for enhanced compatibility and rapid prototyping.

Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (BLE), with onboard antenna Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory. Type-C connector, keeps it up to date, easier to use Onboard 1.28inch LCD display, IPS panel, 240x240 resolution, 65K color. Adopts CNC metal case with Acrylic dull-polish bottom plate Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture. Onboard 3.7V lithium batt recharge/discharge header and GPIO headers Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios. Integrated with USB serial port full-speed controller, GPIO pins allow flexibly configuring pin functions

ESP32-C6-GEEK, a geek development board, onboard USB-A male port, 1.14inch LCD display, TF card slot, and other peripherals. Supports 2.4GHz Wi-Fi 6 and BLE 5, with integrated 16MB Flash, provides I2C header, UART header, and GPIO header, bringing more possibilities for your project Adopts high-performance 32-bit RISC-V processor, up to 160MHz main frequency. Built-in 512KB Static RAM, 320KB ROM, with onboard 16MB Flash memory Onboard 1.14inch 65K color IPS LCD display with 240 x 135 resolution. Integrated 2.4GHz Wi-Fi 6 and BT 5 (LE) dual-mode wireless communication Onboard TF card slot for an external TF card to store images and files. Onboard 3PIN UART header, 3PIN GPIO header and 4PIN I2C header Equipped with plastic case and cables. Provides online open-source demo and resources, more convenient for learning and development

Equipped with the ESP32-C5-WROOM-1U series module, featuring a RISC-V 32-bit processor, up to 240MHz main frequency. Integrated with 384KB Static RAM, 320KB ROM, 8MB PSRAM, and 32MB Flash, meeting the requirements for program execution, graphical interface, and data storage Integrated 2.4GHz and 5GHz dual-band Wi-Fi, Blue-T 5 (LE), and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communications, with outstanding RF performance. Onboard camera interface, supports BF3901 camera Onboard Batt recharge management module, with reserved 3.7V MX1.25 Lithium Batt header for connecting external Batt. Type-C port, improving device compatibility, easier to use. Onboard 3.5inch IPS capacitive touch display for clear color picture display, 320 × 480 resolution, 262K color Built-in ST7796 display driver and FT6336 capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources. Adapting UART, I2C and some IO interfaces, integrates full-speed USB port. Onboard QMI8658 6-axis sensor, RTC sensor, SHTC3 temperature and humidity sensor, TF card slot, etc. Onboard PWR and BOOT programmable buttons for easy custom function development. Onboard ES8311 audio codec chip, NS4150B power amplifier chip, microphone, and speaker. Supports ESP-IDF, Arduino, and other development environments, with rich resources for quick and easy development

4.3inch,HDMI interface, 800x480, IPS, capacitive touch LCD,Supports Multi mini-PCs, Multi Systems Supports popular mini PCs such as Raspberry Pi, Jetson Nano,BB Black, Banana Pi, as well as general desktop computers When works with Raspberry Pi,such as RPi3 B,Raspberry Pi 3 Model A+ or Model B+ , supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free Multi languages OSD menu, for power management, brightness/contrast adjustment, etc. 3.5mm audio jack, speaker connector, supports HDMI audio output 4.3inch ips capacitive touch screen hdmi display interface usb panel lcd high resolution 3.5mm audio jack speaker connector

800x480 high hardware resolution;Resistive touch control; Backlight can be turned off to lower power consumption Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers; When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free. When work as a computer monitor, supports Windows 10/8.1/8/7, single touch, and driver free Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable; BB Black: HDMI cable

High-performance MCU with RISC-V 32-bit dual-core and single-core processors; 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP SRAM, 8 KB TCM; 32MB PSRAM in the chip's package, with onboard 16MB Nor Flash; Adtaping 2*2*13 GPIO headers with 28 x programmable GPIOs Powerful image and voice processing capability. Provides image and voice processing interfaces including JPEG Codec, Pixel Processing Accelerator, Image Signal Processor, H264 encoder; Commonly used peripherals such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 TF card slot, microphone, speaker header and RTC batt header, etc. The 10.1 inch DSI LCD is only included in the ESP32-P4-NANO-KIT-D: IPS Screen, Optical Bonding Toughened Glass Panel, 800 × 1280 Resolution, With 178° Wide Viewing Angle. Supports 10-Point Touch, provides clear image and excellent visual experience Security features: Secure Boot, Flash Encryption, cryptographic accelerators, and TRNG. Additionally, hardware access protection mechanisms help to enable Access Permission Management and Privilege Separation

RP2350-Touch-LCD-1.69 Based on Raspberry Pi RP2350 Small size, touch more possibilities.Suitable for various smart devices development, can realize human-computer interaction function dual-core, dual-architecture.The unique dual-core, dual-architecture capability of RP2350 allows users to choose between a pair of industry-standard Arm Cortex-M33 cores, and a pair of open-hardware Hazard3 cores, giving developers a chance to experiment with the RISC-V architecture in a stable, well-supported environment Supports C/C++, MicroPython, Arduino IDE.Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started CST816T Touch Chip,ST7789V2 Display Chip

The display orientation is portrait by default, 480×640 resolution (H×V). Change the software config for landscape display. Supports Raspberry Pi OS / Ubuntu / Kali / WIN10 IoT / Retropie. Driver free for USB-C touch. Config file is required for I2C touch. For Jetson Nano and PC, only USB-C touch is available Supports all versions of Raspberry Pi. Supports Windows 11 / 10 / 8.1 / 8 / 7 lcd display raspberry pi jetson nano pc screen hdmi touch angle panel backlight

RP2350 MCU Board with 1.28inch Touch LCD Based on Raspberry Pi RP2350 C/C++, MicroPython support,Comprehensive SDK, dev resources, tutorials to help you easily get started Dual-core, dual-architecture.The unique dual-core, dual-architecture capability of RP2350 allows users to choose between a pair of industry-standard Arm Cortex-M33 cores, and a pair of open-hardware Hazard3 cores, giving developers a chance to experiment with the RISC-V architecture in a stable, well-supported environment Small size, touch more possibilities.Suitable for various smart devices development, can realize human-computer interaction function 6-axis sensor (3-axis accelerometer and 3-axis gyroscope)

The display orientation is portrait by default, 320×1480 resolution (H×V). Change the software config for landscape display. Supports all versions of Raspberry Pi. Supports Raspbian, 5-points touch, driver free. Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Supports Retropie, driver free. Jetson Nano:Supports Ubuntu, single point touch, driver free. Supports Windows 10 / 8.1 / 8 / 7, 5-points touch, driver free. raspberry pi 4 screen hdmi lcd jetson nano pc 11.9inch ips display capacitive touch monitor

[When used for Raspberry Pi] compatible with Raspberry Pi OS, 5-point touch, driver free; compatible with Ubuntu / Kali/ WIN10 IoT, single point touch, driver free; compatible with Retropie, driver free. Supports Pi 5/4B/3B+/3A+/3B/2B/B+/A+/CM3/3+/4, but some CM3/3+/4 base boards require extra adapter cable [When used for VisionFive2] compatible with Debian, single point touch, driver free. [When used for Core3566] compatible with Debian/Ubuntu, 5-point touch, driver free [IPS Display Panel]Excellent Display Performance With 170° Wide Viewing Angle. [Display Color Is More Vivid]Better Visual Experience With More Color Details On The Screen. [High Quality Picture , Clear and Bright]New Generation IPS LCD Screen With More Natural Gradual Color Change. [Capacitive 5-Point Touch]up to 5-point touch, depending on the operating system. Up to 6H hardness toughened glass panel. [Adjustable Brightness Via Software]

This 2 inch lcd monitor is a general LCD display Module, IPS screen, 2inch diagonal, 240×320 resolution, with embedded controller, communicating via SPI interface 2 inch lcd screen, samll Raspberry Pi Display, with SPI interface, requires minimum GPIO for controlling Waveshare 2inch lcd, compatible with popular mini PC such as Raspberry Pi, Jetson Nano, Ardui, STM32, it can also become a small computer monitor when connect with a computer Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), feel free to contact us Development resources: www.waveshare.com/wiki/2inch_LCD_Module

MULTIPLE APPLICATION Supports all versions of Raspberry Pi. Supports Raspbian, 5-points touch, driver free. Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Supports Retropie, driver free. Supports Windows 11 / 10 / 8.1 / 8 / 7, 5-points touch, driver free. WIDER VIEWING ANGLE This 7inch Mini Bildschirm IPS Capacitive Touch Screen LCD with 1024×600 Resolution Provides Wider Viewing Angle. VCOM voltage adjustment for optimizing display effect. LOWER POWER CONSUMPTION Backlight adjustment solder pads for PWM signal input, so as to control the backlight brightness, increasing the lifetime of the display and saving power. CAPACITIVE TOUCH Up to 5-points touch, depending on the operating system. USB protocol translator, converting the touch signal into standard multi-points touch protocol to achieve smooth multi-points touch control. PLUG & PLAY This 7Zoll Raspberry Pi touch screen equipped an USB touch port and a HDMI display port. USB and power input solder pads, breakout USB interface, easy for connecting external power supply. zoll mini bildschirm display screen touchscreen monitor

High-Performance Dual-Core Processor – Powered by the ESP32-S3R8 chip with a 240MHz Xtensa 32-bit LX7 dual-core processor, ensuring fast and efficient performance for HMI applications. Wireless Connectivity – Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) with an onboard antenna for seamless wireless communication Ample Memory & Storage – Features 512KB Static RAM, 384KB ROM, 8MB PSRAM, and 16MB Flash, along with a TF card slot for additional storage. Rich Onboard Peripherals – Includes a 1.9-inch LCD (170×320 resolution), a QMI8658 6-axis IMU (accelerometer + gyroscope), and a USB Type-C port for power and debugging. Strong Expandability – Equipped with a Pico-compatible interface, Onboard 3.7V MX1.25 lithium batt charge and discharge interface, and multiple GPIO pins for enhanced compatibility and rapid prototyping.

Supports Raspberry Pi OS Supports up to 5-point capacitive touch, driver required Support Pi5/4B/CM4/3B+/3A+/3B/CM3+/CM3.(CM3/3+/4 requires extra adapter board) 7inch IPS display with a capacitive touch panel, and its hardware resolution is 1024 x 600. Toughened glass capacitive touch panel with 6H hardness. Brightness is adjustable by software. Drive the LCD directly through the DSI interface of the Raspberry Pi, with a refreshing rate of up to 60Hz. When working with the Raspberry Pi, it supports Bookworm/Bullseye/Buster.

ESP32-S3-Touch-LCD-1.85C is a microcontroller development board with 2.4GHz Wi-Fi and BT BLE 5 support, integrates high-capacity Flash and PStatic RAM Onboard 1.85inch LCD display which can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, it is suitable for the quick development of the HMI and other ESP32-S3 applications. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PStatic RAM. Onboard 1.85inch LCD display, 360x360 resolution, 262K color. Supports capacitive touch controlled via I2C interface, with interrupt support Adapting UART, I2C and some IO interfaces. Onboard audio decoder, Microphone, RTC sensor, TF card slot and batt recharge management module, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

AI Edge Computing Development Package B, based on Jetson Orin NX Module. With JETSON-IO-BASE-B base board, more rich interfaces such as M.2, HDMI and USB are provided to facilitate users to better play the product performance Package B consists of Jetson Orin NX 16GB core board, JETSON-IO-BASE-B baseboard, integrated heat sink, 256GB solid state hard disk, dual-band wireless network card module, USB cable, network cable and power supply, 8 megapixel (3280 × 2464) High definition camera, 13.3inch 1920 x 1080 resolution capacitive touch screen with case (support 10-point touch), which can be used to display the captured image in real time and realize more human-computer interactive AI operation The Orin NX core board in this kit is a 16GB memory version without built-in memory module, which can provide AI performance of up to 100 TOPS(Jetson Xavier NX is 21 TOPS). With 256 GB solid state hard disk, it supports high-speed read and write, and can meet the needs of large AI development projects This kit is also pre-installed with dual-band wireless network card module, supporting Bluetooth 5.0, dual-band WIFI, and equipped with PCB antenna, providing high-speed and reliable wireless network connection and Bluetooth communication function for the kit Note: Jetson Orin NX module only supports HDMI interface signal output on the base board, DP interface is not supported

1.28inch Round LCD Display Module With Touch Panel,240×240 resolution, IPS, SPI And I2C Communication. 65K colors, clear and colorful displaying effect. High touch screen transmittance, fast response and long lifetime Embedded GC9A01 driver chip and CST816S capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins, supports controller boards like Raspberry Pi/Raspberry Pi Pico/Arduino/STM32 Comes with online development resources and manual (examples for Raspberry Pi/Raspberry Pi Pico/Arduino/STM32)

Online-Bedienungsanleitung (evtl. nicht in deutscher Sprache). Bitte überprüfen Sie das Handbuch sorgfältig, bevor Sie es verwenden 7-Zoll-IPS-Bildschirm mit einer Hardware-Auflösung von 1024 × 600. 5-Punkte kapazitive Touch-Steuerung Bei Verwendung mit Raspberry Pi unterstützt Raspberry Pi OS / Ubuntu / Kali und Retropie. Verwendung als Computermonitor, unterstützt es Windows 11 / 10 / 8.1 / 8 / 7, Fünf-Punkt-Touch, keine Notwendigkeit, Treiber zu installieren. Unterstützt Hintergrundbeleuchtungssteuerung, mehr Energieeinsparung.