waveshare lcd

Triple-core ARM Cortex-A7 32-bit core, with integrated VFP to support single- and double-precision floating-point operations Built-in ARM Cortex-M0 MCU design, supports SMP and AMP configuration Supports DDR2 / DDR3 / DDR3L memory interface expansion, meeting various expansion needs The low-speed interfaces adopt Rockchip Matrix IO design, which allows rich function signals to share the limited chip pins, making peripheral circuit adaptation more flexible Built-in audio and video codec, supports multiple audio inputs and outputs, providing high-quality audio playback and recording functions

ESP32-C6-Touch-LCD-1.83-EN, Standard version, without Lithium Batt. Equipped with a high-performance RISC-V 32-bit processor with up to 160MHz operating frequency and a low-power RISC-V 32-bit processor with up to 20MHz operating frequency. Integrated Wi-Fi 6, BT 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance Onboard 320KB ROM, 512KB HP Static RAM, 16KB LP Static RAM and external 16MB Flash memory. Type-C port, easier to use. Onboard 1.83inch capacitive touch display, 240 x 284 resolution, 65K color. Built-in ST7789P display driver and CST816D capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc. Onboard PCF85063 RTC chip, powered by Lithium batt. through AXP2101 chip for uninterrupted power supply Onboard PWR and BOOT programmable buttons for easy custom function development. Onboard 3.7V MX1.25 Lithium Batt. recharge/discharge header. Equipped with dual microphone array with noise reduction and echo cancellation circuit, suitable for near/far-field wake-up. Onboard ES8311 audio codec chip, microphones, and speaker Adapting GPIO, I2C, USB and UART pads for external devices connection and debugging, enabling flexible peripheral configuration. Supports accurate control such as flexible clock and independent module power setting to realize low power consumption in different scenarios. High touch screen transmittance, fast response and long lifetime

Supports touch control via I2C interface, with interrupt support. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 2.8inch LCD display, 480x640 resolution Adapting UART, I2C and some IO interfaces, integrates full-speed USB port. Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and batt recharge management module, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

✅Device & System Support: Supports all versions of Raspberry Pi. Support Jetson Nano/Jetson Orin Nano. Supports Windows 11 / 10 / 8.1 / 8 / 7, 10-point touch, driver free. Support Game Console and Smartphone ✅Configurable Display Orientation: The display orientation is landscape by default, 1920x1080 Resolution (H×V). You can change the software config to portrait display ✅Wide Viewing Angle: Excellent display & color performance. Wide viewing angle up to 178°, color gamut up to 72% NTSC ✅10-Point Capacitive Touch: Up to 10-point touch, depending on the operating system. Up to 6H hardness toughened glass panel. Optical bonding, display well and dustproof ✅Rich E-manuals & Tutorials: Provide rich electronic manuals and tutorials. Please contact sales for more information.

High-performance MCU with RISC-V 32-bit dual-core and single-core processors; 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP SRAM, 8 KB TCM; 32MB PSRAM in the chip's package, with onboard 16MB Nor Flash; Adtaping 2*2*13 GPIO headers with 28 x programmable GPIOs Powerful image and voice processing capability. Provides image and voice processing interfaces including JPEG Codec, Pixel Processing Accelerator, Image Signal Processor, H264 encoder; Commonly used peripherals such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet, SDIO 3.0 TF card slot, microphone, speaker header and RTC batt header, etc. The 10.1 inch DSI LCD is only included in the ESP32-P4-NANO-KIT-D: IPS Screen, Optical Bonding Toughened Glass Panel, 800 × 1280 Resolution, With 178° Wide Viewing Angle. Supports 10-Point Touch, provides clear image and excellent visual experience Security features: Secure Boot, Flash Encryption, cryptographic accelerators, and TRNG. Additionally, hardware access protection mechanisms help to enable Access Permission Management and Privilege Separation Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

Powerful Dual-Core Processor: Equipped with the Xtensa 32-bit LX7 dual-core processor, this product runs at up to 240MHz, providing excellent processing power for high-performance applications. Comprehensive Connectivity: Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with a built-in antenna and the option to switch to an external antenna by resoldering an onboard resistor, ensuring versatile wireless communication. Ample Memory and Storage: Built-in 512KB Static Random-Access Memory, 384KB ROM, 16MB Flash, and 8MB P Static Random-Access Memory offer large storage capacity, making it ideal for applications that require substantial memory for data and operations. Integrated Display and Sensors: Features a 3.16-inch LCD display with a 320×820 resolution and RGB565 interface for clear visual output, plus an onboard QMI8658 6-axis IMU for motion tracking and a PCF85063 RTC chip for real-time clock functionality. Flexible Expansion & Development: Includes a TF card slot, USB Type-C port, and reserved UART, I2C, and USB headers for flexible expansion. With easy power control via a slide switch and a dedicated batt header, it is perfect for rapid prototyping and development of ESP32-S3 applications. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

Processor & Performance: Powered by an Xtensa 32-bit LX7 dual-core processor, capable of up to 240MHz, ensuring efficient processing for complex tasks. Connectivity: Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with an onboard antenna for seamless wireless communication. Memory & Storage: Comes with 512KB Static RAM, 384KB ROM, 8MB PSRAM, and 8MB Flash, providing ample storage and smooth performance for applications. Display: Onboard 7inch LCD display, 800×480 resolution, 65K color; Peripheral Interfaces & Power: Includes CAN, RS485, I2C, TF card slot, full-speed USB, and power-saving controls, with flexible clock and independent module power supply for efficient energy management. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.

ESP32-P4-WIFI6 7inch Touch Display Development Board,High-performance development board based on ESP32-P4 and ESP32-C6 Rich Human-machine Interfaces 7inch IPS touch screen.160° wide viewing angle, Excellent display performance, high contrast Capacitive 5-point touch.Supports 5-point sensitive touch, seamlessly combining intuitive operation with rapid response for efficient and convenient development Supports expanding multiple peripherals.Supports the expansion of multiple peripherals via CAN, RS485, UART and I2C interfaces Audio input / output.Onboard ES8311 audio codec chip and ES7210 echo cancellation circuit. Meet daily audio application scenarios

Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Adapting UART, I2C and some IO interfaces, integrates full-speed USB port Onboard 2.8inch capacitive touch display, 240×320 resolution, 262K color. Onboard speaker, QMI8658 6-axis sensor, RTC sensor, TF card slot and batt recharge management module, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

High-Performance Processor: Powered by the ESP32-S3R8 chip with a 32-bit Xtensa LX7 dual-core processor, up to 240MHz, ensuring fast and efficient performance for various applications. Wireless Connectivity: Integrated WiFi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance, enabling seamless wireless communication for IoT projects. Rich Memory & Storage: Equipped with 512KB SRAM, 384KB ROM, 16MB Flash, and 8MB PSRAM, providing ample memory for complex tasks and smooth operation. 1.9-inch LCD Display: Features a 170×320 resolution, 262K color LCD display, delivering vibrant and clear visuals ideal for GUI-based applications like LVGL. Expandability & Compatibility: Includes onboard QMI8658 6-axis IMU, TF card slot, USB Type-C, and supports Pico header, ensuring broad compatibility and easy integration with external peripherals. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.

ESP32-S3-Touch-LCD-1.85 is a microcontroller development board with 2.4GHz WiFi and BT BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 1.85inch LCD display which can smoothly run GUI programs such as LVGL, with capacitive touch function. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.Onboard audio decoder, Microphone, QMI8658 6-axis sensor, RTC sensor, TF card slot and batt recharge management module, etc With capacitive touch function controled via I2C interface, with interrupt support. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Adapting UART, I2C and some IO interfaces Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 1.85inch LCD display, 360×360 resolution, 262K color Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

【ESP32-S3 1.85″ LCD Development Board】Integrates QSPI interface display, multiple peripheral interfaces 【IPS Display Panel】262K color, 360×360 resolution, wide viewing angle 【Supports multiple peripherals】Supports the expansion of multiple peripherals via GPIO and I2C interfaces, etc. 【Display control chip】Display: ST77916 【Package Content】ESP32-S3-LCD-1.85 x1，2030 8Ω 2W speaker ×1，SH1.0 4PIN cable ~100mm ×2

720×1280 Resolution, Optical Bonding Toughened Glass Panel, HDMI Interface, IPS Panel, 5-Point Touch The display orientation is portrait by default, 720×1280 resolution (H×V). Change the software config for landscape display. Supports all versions of Raspberry Pi; Supports Ubuntu, single point touch, driver free; Supports Windows 11 / 10 / 8.1 / 8 / 7, 5-point touch, driver free Up to 5-point touch, depending on the operating system; Up to 6H hardness toughened glass panel; Optical Bonding, display well Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

8.8inch DSI touch screen, supports ten-point capacitive touch control. IPS display panel with hardware resolution of 480×1920. Adopt optical bonding process, the picture quality is clearer; Equipped with 6H hardness tempered glass touch cover. Compatible with Raspberry Pi 5/4B/CM4/3B+/3A+/3B/CM5/CM4/CM3+/CM3; Directly drive the LCD through the Raspberry Pi's DSI interface, with a refresh rate of up to 60Hz. When used with Raspberry Pi, it is compatible with Bookworm/Bullseye/Buster systems; Supports software to adjust the brightness of the backlight. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

ESP32-C6-GEEK, a geek development board, onboard USB-A male port, 1.14inch LCD display, TF card slot, and other peripherals. Supports 2.4GHz Wi-Fi 6 and BLE 5, with integrated 16MB Flash, provides I2C header, UART header, and GPIO header, bringing more possibilities for your project Adopts high-performance 32-bit RISC-V processor, up to 160MHz main frequency. Built-in 512KB Static RAM, 320KB ROM, with onboard 16MB Flash memory Onboard 1.14inch 65K color IPS LCD display with 240 x 135 resolution. Integrated 2.4GHz Wi-Fi 6 and BT 5 (LE) dual-mode wireless communication Onboard TF card slot for an external TF card to store images and files. Onboard 3PIN UART header, 3PIN GPIO header and 4PIN I2C header Equipped with plastic case and cables. Provides online open-source demo and resources, more convenient for learning and development

240x320 resolution, 262K colors, clear and colorful displaying effect Embedded with ST7789T3 driver chip and CST816D capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins Adapting 15PIN connector and 18PIN FPC slot for connecting the LCD module to the host board High touch screen transmittance, fast response and long lifetime. Onboard voltage translator, compatible with 3.3V / 5V operating voltage Can provide with online development resources and manual (examples for Raspberry Pi / ESP32 / Raspberry Pi Pico)

ESP32-C3-LCD-0.71 is a microcontroller development board with 2.4GHz WiFi and BT BLE 5 support. Onboard 0.71inch LCD display which can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI applications based on the ESP32-C3 such as low-power AI emulation eyes, watches, etc. Low-power SoC equipped with RISC-V 32-bit single-core processor, up to 160MHz main frequency, Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) 400KB of Static RAM and 384KB ROM, and 4MB of onboard Flash memory, Onboard 0.71inch LCD display, 160×160 resolution, IPS panel, Built-in batt recharge management circuit, reserved VBAT solder joints, for connecting external Lithium batt power supply Adapting some GPIO solder pads for external expansion applications, Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios Suitable for HMI applications based on the ESP32-C3 such as low-power AI emulation eyes, watches, etc.

A microcontroller development board with 5inch capacitive touch display, can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications 800x480 resolution, 65K color. 160° Viewing Angle. Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Supports passive and active digital input, with bi-directional optocoupler isolation Onboard voltage regulator, supports 7~36V wide range power supply. Onboard RTC chip and rechargeable batt to ensure time data is not lost when power loss. Onboard CAN, RS485, I2C interface and TF card slot, GH1.25 2P batt header and digital isolated IO interfaces, etc. Onboard LED indicators for indicating the power and batt recharging status. Supports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current. Supports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios

10.1-inch IPS capacitive touch screen with a hardware resolution of 1280 x 800. Adopts optical bonding technique, clearer imaging Support 10-point capacitive touch control, tempered glass touch panel with 6H hardness Can be directly connected to the LCD by the DSI interface of the Raspberry Pi, and its refreshing rate is up to 60Hz When working with Pi, we provide the Pi OS system driver Support Raspberry Pi 4B/3B+/3A+, but CM3+/4 should work with Extra DSI cable. Support backlight adjusted by software

Processor & Performance: Features an Xtensa 32-bit LX7 dual-core processor with a main frequency of up to 240MHz for high performance. Connectivity: Offers 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) with an onboard antenna, enabling wireless communication. Memory & Storage: Equipped with 512KB Static RAM, 384KB ROM, 16MB Flash, and 8MB PSRAM for ample storage and smooth execution of applications; Display: Onboard 5inch LCD display, options for 1024×600 resolution, 65K color Peripheral & Power Features: Supports various interfaces (CAN, RS485, I2C, TF card slot, MX1.25 2P batt header, optocoupler-isolated IOs) and offers a wide power supply range (7-36V), with onboard voltage regulator, RTC chip, and low-power consumption controls. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.

Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use. Onboard 2inch capacitive touch display for clear color picture display, 240 x 320 resolution, 262K color Built-in ST7789T3 display driver and CST816D capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope).Onboard 3.7V MX1.25 Lithium batt recharge/discharge header. Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use Onboard TF card slot for external TF card storage of pictures or files. Adapting 22 x GPIO pins for flexible configuration of pin function. Onboard camera interface, compatible with mainstream cameras such as OV2640(NOT Included) and OV5640(Included) for image and video acquisition

8inch 768x1024 LCD, IPS display panel with 178° wide viewing angle, up to 6H hardness toughened glass panel Up to capacitive 10-Point Touch(depending on the operating system). Supports Backlight Adjustment Via Software When used for Raspberry Pi, compatible with Raspberry Pi OS, 10-point touch, driver free; compatible with Ubuntu/Kali/WIN10 IoT, single point touch, driver free; compatible with Retropie, driver free When used for Jetson Series Board, compatible with Ubuntu, single point touch, driver free When used for PC, compatible with Windows 11 / 10 / 8.1 / 8 / 7, 10-point touch, driver free

Versatile Connectivity & Performance: Integrated WiFi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, offering high-speed connectivity for IoT applications. It also integrates a powerful 32-bit RISC-V processor with clock speeds of up to 160 MHz and a low-power mode at 20 MHz for efficient operation. Onboard 1.47-inch LCD Display: The board includes a high-resolution 1.47-inch LCD screen (172×320), supporting 262K colors, which is ideal for running GUI programs like LVGL, making it perfect for developing human-machine interfaces (HMIs) and visual applications. Expandable Memory & Storage: Equipped with 320KB ROM, 512KB of HP SRAM, 16KB LP SRAM, and 4MB Flash memory, this board offers ample storage and memory for a wide range of embedded applications. It also includes a TF card slot for external storage of images or files. Multiple IO Interfaces & USB Support: This board offers various IO interfaces, including a full-speed USB port, providing flexibility for connecting additional peripherals or expanding functionality. It's well-suited for quick development and integration of additional modules. Low Power & Cool Lighting Effects: The ESP32-C6-LCD-1.47 supports flexible clock management and multiple power modes to ensure low power consumption in different use cases. Additionally, it comes with a built-in RGB LED and a clear acrylic sandwich panel, creating a visually appealing lighting effect for your projects. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.

A high-performance development board(without Batt) based on ESP32-P4 controller with RISC-V 32-bit dual-core and single-core processors. Equipped with 10.1inch IPS touch display, features rich human-machine interfaces including MIPI-CSI (with integrated Image Signal Processor), it also supports USB OTG 2.0 HS for high-speed communication The ESP32-P4 chip integrates the Digital Signature Peripheral and a dedicated Key Management Unit, ensuring secure data and operations. Specifically designed for high-performance and high-security applications, to meet the higher requirements of embedded applications such as Human-Machine interaction, efficient edge computing, and IO expansion High-performance MCU with RISC-V 32-bit dual-core and single-core processors. 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP Static RAM, 8 KB TCM. Powerful image and voice processing capability. Provides image and voice processing interfaces including JPEG Codec, Pixel Processing Accelerator, Image Signal Processor, H264 encoder 32MB PStatic RAM in the chip's package, with onboard 32MB Nor Flash. Commonly used peripherals such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO 3.0 TF card slot, dual microphones (supports echo cancellation), and speaker, etc. Security features: Secure Boot, Flash Encryption, cryptographic accelerators, and TRNG. Additionally, hardware access protection mechanisms help to enable Access Permission Management and Privilege Separation

AI Edge Computing Development Package B, based on Jetson Orin NX Module. With JETSON-IO-BASE-B base board, more rich interfaces such as M.2, HDMI and USB are provided to facilitate users to better play the product performance Package B consists of Jetson Orin NX 16GB core board, JETSON-IO-BASE-B baseboard, integrated heat sink, 256GB solid state hard disk, dual-band wireless network card module, USB cable, network cable and power supply, 8 megapixel (3280 × 2464) High definition camera, 13.3inch 1920 x 1080 resolution capacitive touch screen with case (support 10-point touch), which can be used to display the captured image in real time and realize more human-computer interactive AI operation The Orin NX core board in this kit is a 16GB memory version without built-in memory module, which can provide AI performance of up to 100 TOPS(Jetson Xavier NX is 21 TOPS). With 256 GB solid state hard disk, it supports high-speed read and write, and can meet the needs of large AI development projects This kit is also pre-installed with dual-band wireless network card module, supporting Bluetooth 5.0, dual-band WIFI, and equipped with PCB antenna, providing high-speed and reliable wireless network connection and Bluetooth communication function for the kit Note: Jetson Orin NX module only supports HDMI interface signal output on the base board, DP interface is not supported

Touch panel only,only when integrated or connected to the motherboard can it be used.IPS screen,1280x800 hardware resolution; Toughened glass capacitive touch control panel, 6H hardness Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers; When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free;When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free HDMI interface for displaying, USB interface for touch control;Supports 5-level backlight adjustment Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable; BB Black: HDMI cable

High-Performance Processor: Equipped with ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Wireless Connectivity: Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Memory & Storage: Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Display & Interaction: Onboard Type-C port, more convenient, better device compatibility; onboard 1.46inch LCD display, 412 × 412 resolution, 16.7M color; supports touch function controlled via I2C interface, with interrupt support. Rich Peripherals & Low Power: Adapting UART, I2C and partial IO interfaces; onboard QMI8658 6-axis IMU, PCF85063 RTC with batt header, PWM/BOOT buttons, TF card slot; supports flexible clock/power modes for low power consumption; multiple GPIO pins for easy customization.

【ESP32-S3 1.85″ LCD Development Board】Integrates QSPI interface display, multiple peripheral interfaces 【IPS Display Panel】262K color, 360×360 resolution, wide viewing angle 【Supports multiple peripherals】Supports the expansion of multiple peripherals via GPIO and I2C interfaces, etc. 【Display control chip】Display: ST77916 【Capacitive touch】Optional for capacitive touch function controled via I2C interface for flexible operation and smooth UI interaction, with interrupt support

ESP32-P4-WIFI6-Touch-LCD-3.5-EN, Standard version, without Lithium Batt The ESP32-P4-WIFI6-Touch-LCD-3.5-EN is a high-performance development board based on ESP32-P4 controller with RISC-V 32-bit dual-core and single-core processors Equipped with 3.5inch IPS touch display, highly integrated power management chip, and low-power audio codec chip, features rich human-machine interfaces including MIPI-CSI (with integrated Image Signal Processor), it also supports USB OTG 2.0 HS for high-speed connectivity The ESP32-P4 chip integrates the Digital Signature Peripheral and a dedicated Key Management Unit, ensuring secure data and operations Specifically designed for high-performance and high-security applications, to meet the higher requirements of embedded applications such as Human-Machine interaction, efficient edge computing, and IO expansion

Tempered glass panel(hardness up to 6h). Full screen fit, good display, and dustproof Features HDMI display interface, usb type-c touch interface, with 3.5mm earphone interface, speaker interface [When used with raspberry pi] compatible with raspberry pi os, ten point touch, drive free; support ubuntu/kali/win10 iot, single touch, drive free; support for retropie, drive free [When used with jetson nano] compatible with ubuntu, single touch, drive free [When used with pc computer] compatible with windows 11/10/8.1/8/7, ten point touch, drive free