waveshare lcd

Waveshare LCD1602 I2C Module (Grau) Das Waveshare LCD1602 I2C Modul ist ein Zeichen-LCD-Display mit 16 Zeichen in 2 Zeilen. Es nutzt eine I2C-Schnittstelle, wodurch nur zwei Signalleitungen erforderlich sind, um die IO-Ressourcen des Controllers zu sparen. Das Modul ist mit einer variablen Hintergrundbeleuchtung ausgestattet und unterstützt eine Betriebsspannung von 3,3 V bis 5 V. Es verfügt über den AiP31068 LCD-Treiber und den SN3193 Hintergrundbeleuchtungstreiber. Durch die I2C-Schnittstelle lässt sich das Display mit Mikrocontrollern und Einplatinencomputern mit begrenzten IO-Pins einfach steuern. Die variable Hintergrundbeleuchtung ermöglicht eine bessere Anpassung an unterschiedliche Lichtverhältnisse. Das Display bietet eine monochrome Darstellung mit verschiedenen Farbkombinationen. Das Modul kann für verschiedene Anwendungen genutzt werden, beispielsweise zur Anzeige von Sensordaten,

Waveshare LCD1602 I2C Module (Grün) Das Waveshare LCD1602 I2C Modul ist ein Zeichen-LCD-Display mit 16 Zeichen in 2 Zeilen. Es nutzt eine I2C-Schnittstelle, wodurch nur zwei Signalleitungen erforderlich sind, um die IO-Ressourcen des Controllers zu sparen. Das Modul ist mit einer variablen Hintergrundbeleuchtung ausgestattet und unterstützt eine Betriebsspannung von 3,3 V bis 5 V. Es verfügt über den AiP31068 LCD-Treiber und den SN3193 Hintergrundbeleuchtungstreiber. Durch die I2C-Schnittstelle lässt sich das Display mit Mikrocontrollern und Einplatinencomputern mit begrenzten IO-Pins einfach steuern. Die variable Hintergrundbeleuchtung ermöglicht eine bessere Anpassung an unterschiedliche Lichtverhältnisse. Das Display bietet eine monochrome Darstellung mit verschiedenen Farbkombinationen. Das Modul kann für verschiedene Anwendungen genutzt werden, beispielsweise zur Anzeige von Sensordaten,

LCD1602 RGB Modul, 16x2 Zeichen LCD, RGB Hintergrundbeleuchtung, 3.3V/5V, I2C Bus

Waveshare RP2040-Touch-LCD-1.69 Das Waveshare RP2040-Touch-LCD-1.69 ist ein vielseitiges Entwicklungsboard mit integriertem kapazitiven Touchscreen und zahlreichen Peripheriefunktionen. Ausgestattet mit dem RP2040-Mikrocontroller von Raspberry Pi bietet es einen Dual-Core Arm Cortex M0+ Prozessor mit einer flexiblen Taktfrequenz von bis zu 133 MHz. Mit 264 KB SRAM und 16 MB Flash-Speicher eignet es sich für anspruchsvolle Anwendungen in der Entwicklung smarter Geräte. Das Board verfügt über ein 1,69 Zoll kapazitives Touch-Display mit einer Auflösung von 240 × 280 Pixeln und 65.000 Farben. Ergänzt wird es durch einen Lithium-Ionen-Batteriemanager, einen 6-Achsen-Sensor (3-Achsen-Beschleunigungssensor und 3-Achsen-Gyroskop), eine RTC-Funktion mit Batterieanschluss sowie einen integrierten Buzzer. Diese Ausstattung ermöglicht eine einfache Integration in Projekte, die Mensch-Maschine-Interaktion erfordern.

Dies ist ein allgemeines LCD-Anzeigemodul, IPS-Bildschirm, 2 Zoll Diagonale, 240 x 320 Auflösung, mit eingebettetem Controller, der über...

Incorporates character LCD panel LCD1602 Adjustable RGB backlight color, up to 16M (2563) backlight colors in theory I2C control interface, only two signal pins are required, saving the IO resource Compatible with 3.3V/5V operating voltage Comes with development resources and manual (Raspberry Pi/Jetson Nano/Arduino examples) Small RGB LCD Display Module

Supports Raspberry Pi, Raspberry Pi Pico, Jetson Nano, ESP32 and Arduino. Incorporates character LCD panel LCD1602 I2C control interface, only two signal pins are required, saving the IO resource Compatible with 3.3V/5V operating voltage. Onboard AiP31068 LCD driver and SN3193 backlight driver

Supports Raspberry Pi, Raspberry Pi Pico, Jetson Nano, ESP32 and Arduino. Incorporates character LCD panel LCD1602 I2C control interface, only two signal pins are required, saving the IO resource Compatible with 3.3V/5V operating voltage. Onboard AiP31068 LCD driver and SN3193 backlight driver

ESP32-C3-LCD-0.71 is a microcontroller development board with 2.4GHz WiFi and BT BLE 5 support. Onboard 0.71inch LCD display which can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI applications based on the ESP32-C3 such as low-power AI emulation eyes, watches, etc. Low-power SoC equipped with RISC-V 32-bit single-core processor, up to 160MHz main frequency, Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) 400KB of Static RAM and 384KB ROM, and 4MB of onboard Flash memory, Onboard 0.71inch LCD display, 160×160 resolution, IPS panel, Built-in batt recharge management circuit, reserved VBAT solder joints, for connecting external Lithium batt power supply Adapting some GPIO solder pads for external expansion applications, Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios Suitable for HMI applications based on the ESP32-C3 such as low-power AI emulation eyes, watches, etc.

ESP32-S3-Touch-LCD-1.54, with touch control. Featuring a custom-molded square plastic case, offering a compact and premium appearance Onboard 1.54inch LCD display, 6-axis sensor, dual microphones array, and TF card slot, providing the hardware foundation for display, sensing, voice, and multimedia storage. With these hardware resources, it supports fun interactive mini-games, voice wake-up, conversation interruption, noise reduction, and echo cancellation It allows access to online AI large model platforms, enabling intelligent voice interaction and continuous upgrades The factory firmware includes built-in functions such as AI conversation, audio and video playback, photo album, text reading, and a gravity ball game It can be used directly as an AI chatting toy, while also supporting customization and secondary development

ESP32-S3-Touch-LCD-3.49B, Case B version. Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Reserved 22PIN 2.54mm pitch through-hole pads for easy connection to external modules or functional expansion, enhancing development flexibility. Built-in 512KB of Static RAM and 384KB ROM, with onboard 8MB PStatic RAM and an external 16MB Flash memory. Onboard 3.49inch IPS capacitive touch display for clear color picture display, 172x640 resolution, 16.7M color Equipped with dual microphone array with noise reduction and echo cancellation circuit, suitable for accurate speech recognition and near/far-field wake-up. Built-in AXS15231B LCD & touch controller, using QSPI and I2C interfaces for communication respectively Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc.. Onboard PCF85063 RTC chip for RTC functionality. Onboard PWR and BOOT programmable buttons for easy custom function development Onboard 3.7V MX1.25 Li batt recharge/discharge header or Li batt holder. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design

RP2350-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi's RP2350A microcontroller chip, the same as the one on Raspberry Pi Pico 2. For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly. RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom, Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz 520KB of Static RAM, and 4MB of on-board Flash memory, USB-C connector, keeps it up to date, easier to use, 0.96inch 160×80 pixels 65K colorful IPS LCD display, Lithium batt recharge/discharge header, suitable for mobile devices Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, maximum 2A load current, Castellated module allows soldering directly to carrier boards, USB 1.1 with device and host support, Low-power sleep and dormant modes, Drag-and-drop programming using mass storage over USB 26 × multi-function GPIO pins, 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels, Accurate clock and timer on-chip, Accelerated floating-point libraries on-chip, 12 × Programmable I/O (PIO) state machines for custom peripheral support

ESP32-S3-Touch-LCD-3.49, Case A version. Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Reserved 22PIN 2.54mm pitch through-hole pads for easy connection to external modules or functional expansion, enhancing development flexibility. Built-in 512KB of Static RAM and 384KB ROM, with onboard 8MB PStatic RAM and an external 16MB Flash memory. Onboard 3.49inch IPS capacitive touch display for clear color picture display, 172x640 resolution, 16.7M color Equipped with dual microphone array with noise reduction and echo cancellation circuit, suitable for accurate speech recognition and near/far-field wake-up. Built-in AXS15231B LCD & touch controller, using QSPI and I2C interfaces for communication respectively Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc.. Onboard PCF85063 RTC chip for RTC functionality. Onboard PWR and BOOT programmable buttons for easy custom function development Onboard 3.7V MX1.25 Li batt recharge/discharge header or Li batt holder. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design

ESP32-S3-Touch-LCD-1.54-EN, with touch control, without Li Batt. Featuring a custom-molded square plastic case, offering a compact and premium appearance Onboard 1.54inch LCD display, 6-axis sensor, dual microphones array, and TF card slot, providing the hardware foundation for display, sensing, voice, and multimedia storage. With these hardware resources, it supports fun interactive mini-games, voice wake-up, conversation interruption, noise reduction, and echo cancellation It allows access to online AI large model platforms, enabling intelligent voice interaction and continuous upgrades The factory firmware includes built-in functions such as AI conversation, audio and video playback, photo album, text reading, and a gravity ball game It can be used directly as an AI chatting toy, while also supporting customization and secondary development

ESP32-S3-Touch-LCD-3.49B-EN, Case B version, without batt. Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Reserved 22PIN 2.54mm pitch through-hole pads for easy connection to external modules or functional expansion, enhancing development flexibility. Built-in 512KB of Static RAM and 384KB ROM, with onboard 8MB PStatic RAM and an external 16MB Flash memory. Onboard 3.49inch IPS capacitive touch display for clear color picture display, 172x640 resolution, 16.7M color Equipped with dual microphone array with noise reduction and echo cancellation circuit, suitable for accurate speech recognition and near/far-field wake-up. Built-in AXS15231B LCD & touch controller, using QSPI and I2C interfaces for communication respectively Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc.. Onboard PCF85063 RTC chip for RTC functionality. Onboard PWR and BOOT programmable buttons for easy custom function development Onboard 3.7V MX1.25 Li batt recharge/discharge header or Li batt holder. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design

ESP32-S3-Touch-LCD-3.49-EN, Case A version, without batt. Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Reserved 22PIN 2.54mm pitch through-hole pads for easy connection to external modules or functional expansion, enhancing development flexibility. Built-in 512KB of Static RAM and 384KB ROM, with onboard 8MB PStatic RAM and an external 16MB Flash memory. Onboard 3.49inch IPS capacitive touch display for clear color picture display, 172x640 resolution, 16.7M color Equipped with dual microphone array with noise reduction and echo cancellation circuit, suitable for accurate speech recognition and near/far-field wake-up. Built-in AXS15231B LCD & touch controller, using QSPI and I2C interfaces for communication respectively Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc.. Onboard PCF85063 RTC chip for RTC functionality. Onboard PWR and BOOT programmable buttons for easy custom function development Onboard 3.7V MX1.25 Li batt recharge/discharge header or Li batt holder. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design

1,8-Zoll-LCD-Display-Modul, 128x160 Pixel, SPI-Schnittstelle

2-Zoll-LCD-Anzeigemodul, IPS-Bildschirm, 240×320 Auflösung, SPI-Schnittstelle

1.44inch LCD Display HAT für Raspberry Pi, 128x128 Pixel, SPI Schnittstelle

0,96-Zoll-LCD-Display-Modul, IPS-Bildschirm, 160x80 HD-Auflösung, SPI-Schnittstelle

1,14-Zoll-LCD-Anzeigemodul, IPS-Bildschirm, 65K RGB-Farben, 240×135 Auflösung, SPI-Schnittstelle

2,4-Zoll-LCD-Anzeigemodul, 65K RGB-Farben, 240×320 Auflösung, SPI-Schnittstelle

BeschreibungDer 3.2inch LCD Adapter(B) ermöglicht es das 3.2inch 320x240 Touch LCDzu steuern.Eigenschaften32I/Os interfaceDatesheet3.2inch-LCD-Adapter-B.PDFLieferumfang1x 3.2inch LCD Adapter(B)

1,3-Zoll-LCD-Display-Modul, IPS-Bildschirm, 240x240 HD-Auflösung, SPI-Schnittstelle

1,54-Zoll-LCD-Anzeigemodul, IPS-Bildschirm, 65K RGB-Farben, 240×240 Auflösung, SPI-Schnittstelle

Rundes 1,28-Zoll-LCD-Anzeigemodul, 65K RGB-Farben, 240×240 Auflösung, SPI-Schnittstelle

1.3inch IPS LCD Display HAT für Raspberry Pi, 240x240 Pixel, SPI Schnittstelle

Equipped with the ESP32-C5-WROOM-1 series module, featuring a RISC-V 32-bit processor, up to 240MHz main frequency. Integrated with 384KB Static RAM, 320KB ROM, 8MB Pstatic ram, and 32MB Flash, meeting the requirements for program execution, graphical interface, and data storage Integrated 2.4GHz and 5GHz dual-band Wi-Fi, BT 5 (LE), and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communications, with outstanding RF performance. Onboard Batt recharge management module, with reserved 3.7V MX1.25 Li Batt header for connecting external Batt Type-C port, improving device compatibility, easier to use. Onboard 2.8inch LCD display, 240 x 320 resolution, 262K color. Supports 5-point capacitive touch controlled via I2C interface, with interrupt support Adapting UART, I2C and some IO interfaces, integrates full-speed USB port. Onboard QMI8658 6-axis sensor, RTC sensor, SHTC3 temperature and humidity sensor, TF card slot, etc. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios. Onboard ES8311 audio codec chip, NS4150B power amplifier chip, microphone, and speaker

Hochleistungs-Touchscreen: Erleben Sie nahtlose Interaktion mit einem kapazitiven 10-Punkt-Touchsystem, perfekt für interaktive Anwendungen und...

11.9 Zoll HDMI LCD mit kapazitivem Touchscreen, 320×1480, IPS, gehärtetes Glas Das 11.9 Zoll große HDMI-Touchdisplay verfügt über ein IPS-Panel mit einer Auflösung von 320×1480 Pixeln im Hochformat. Die Anzeige basiert auf einem kontrastreichen IPS-Panel mit einem weiten Betrachtungswinkel von 170°. Der integrierte kapazitive Touchscreen unterstützt bis zu fünf gleichzeitige Berührungspunkte und ist mit einer widerstandsfähigen Abdeckung aus gehärtetem Glas ausgestattet. Die Touch-Funktion wird über einen USB-Anschluss bereitgestellt, die Bildübertragung erfolgt per HDMI-Schnittstelle. Die native Anzeigeausrichtung ist vertikal (Portrait), eine Umstellung auf horizontale Darstellung ist über Softwarekonfiguration möglich. Auf der Rückseite des Moduls befinden sich ein HDMI-Port, ein Audioausgang (3,5 mm Klinkenbuchse), ein USB-Touchport sowie Bedientasten für Ein/Aus, Helligkeit und Drehung der Touchausrichtung. Die mechanischen Abmessungen betragen