waveshare rp2040

HF version: 850 ~ 930MHz frequency, Applicable to Europe, North America and Oceania. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz. 264KB of SRAM, and 2MB of onboard Flash memory Onboard FPC 8PIN connector, adapting USB Type-C port via adapter board. Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB, up to 20 × multi-function GPIO pins Supports FSK, GFSK, LoRa modulation, featuring better anti-blocking and ultra-long distance communication. Supports preamble detection, with CRC, up to 256 bytes data packet engine With -148dBm high reception sensitivity and programmable emit power up to 22dBm. Can provide with online resources and manual (example in C)

Advanced RP2040-ETH Module: Equipped with a dual-core Arm Cortex M0+ processor capable of speeds to 133 MHz, this board features 264KB of and 4MB of...

RP2040-GEEK ist ein von Waveshare entwickeltes Entwicklungsboard für Geeks mit integrierter USB-A-Schnittstelle, 1,14-Zoll-LCD-Bildschirm, TF-Kartensteckplatz und anderen Peripheriegeräten. Bietet unterschiedliche Firmware für SWD-Port, UART-Port und I2C-Port.Hauptmerkmale:RP2040-Mikrocontroller-Chip, entwickelt von Raspberry Pi im Vereinigten KönigreichOnboard 3PIN SWD-Port zum Anschluss der debuggten ZielplatineDie Standard-CMSIS-DAP-Schnittstelle kann zum Debuggen der meisten ARM-basierten Mikrocontroller verwendet werdenFunktioniert mit OpenOCD und anderen Tools, die CMSIS-DAP unterstützenÜbernimmt die Raspberry Pi 3PIN Debug Connector-SpezifikationOnboard 3PIN USB-zu-UART-BrückeOnboard-4PIN-I2C-Port für die TestzielplatineOnboard 1,14 Zoll 240x135 Pixel 65K-Farb-IPS-LCD-DisplayAusgestattet mit Kunststoffgehäuse und KabelnOpen-Source-Firmware, einfacher zu aktualisierenKombiniert mehrere Funktionen in einemOnboard-Multischnittstellen und 1,14-Zoll-LCD-Display, kompatibel mit mehreren Debugging-MethodenOnboard-RessourcenUSB

RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 264KB of SRAM, and 4MB of on-board Flash memory. USB-C connector, keeps it up to date, easier to use. Lithium batt recharge/discharge header, suitable for mobile devices Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, 2A current switch. Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. 26 × multi-function GPIO pins. 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Accurate clock and timer on-chip. Temperature sensor. Accelerated floating-point libraries on-chip. 8 × Programmable I/O (PIO) state machines for custom peripheral support

Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz. 264KB of SRAM, and 2MB of on-board Flash memory. Onboard 1.28inch 240×240 pixels 65K colorful IPS LCD display for clear color pictures Type-C connector, keeps it up to date, easier to use. Lithium batt recharge/discharge header, suitable for mobile devices. Adopts CNC metal case with Acrylic dull-polish bottom plate All GPIO pins are adapted through 1.27 pitch female headers (There are 30 pins in total, but some pins have been connected to the internal circuit, please refer to the munual for details when multiplexing) USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB 2 x SPI, 2 x I2C, 2 x UART, 4 x 12-bit ADC, 16 x controllable PWM channels. Accurate clock and timer on-chip. Built-in temperature sensor. Accelerated floating-point libraries on-chip. 8 x Programmable I/O (PIO) state machines for custom peripheral support

Waveshare RP2040-Matrix Entwicklungsboard: 5×5 RGB LED Matrix, basierend auf dem offiziellen RP2040 Dual-Core-Prozessor Das Waveshare RP2040-Matrix Entwicklungsboard ist ein Pico-ähnliches MCU-Board, das auf dem Raspberry Pi RP2040 basiert. Es verfügt über eine 5×5 RGB LED Matrix und ist für SMD-Anwendungen mit einem Gusskantenmodul geeignet. Merkmale im Überblick RP2040 Mikrocontrollerchip von Raspberry Pi, Dual-Core Arm Cortex M0+ Prozessor mit flexibler Taktung bis zu 133 MHz 264KB SRAM und 2MB On-Board Flash-Speicher Onboard 5×5 RGB LED Matrix für farbenfrohe Lichtdisplays USB 1.1 mit Geräte- und Host-Unterstützung 20 × multifunktionale GPIO-Pins Unterstützung für C/C++, MicroPython, Arduino Temperatursensor und beschleunigte Floating-Point-Bibliotheken

RP2040-Zero, ein kostengünstiges, leistungsstarkes Pico-ähnliches MCU-Board auf Basis Raspberry Pi Mikrocontroller RP2040Leistungsbeschreibung Mikrocontroller ChipRP2040Dual-Core Arm Cortex M0+ Prozessor, flexibler Takt mit bis zu 133 MHz264 KB SRAM und 2 MB integrierten Flash-SpeicherUSB-C-Anschluss, hält es auf dem neuesten Stand, einfacher zu bedienenKastelliertes Modul ermöglicht das Löten direkt auf TrägerplatinenUSB 1.1 mit Geräte- und HostunterstützungEnergiesparmodus und RuhemodusDrag-and-Drop-Programmierung mit Massenspeicher über USB29 x Multifunktions-GPIO-Pins (20x über Kantenpinbelegung, andere über Lötpunkte)2 x SPI, 2 x I2C, 2 x UART, 4 x 12-Bit-ADC, 16 x steuerbare PWM-KanäleAktakt und Timer auf dem ChipTemperatursensorBeschmte Gleitkommabibliotheken auf dem Chip8x PIO-Zustandsmaschinen (Programmable I/O) für benutzerdefinierte PeripheriegeräteWas ist an BordUSB Typ-C-AnschlussW25Q16JVUXIQ 2MB NOR-FlashBOOT-Taste drücken Sie beim Zurücksetzen, um in den Download-Modus zu gelangenTaste "RESET"WS2812 kühle RGB-LE

Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz. 264KB of SRAM, and 2MB of on-board Flash memory Type-C connector, keeps it up to date, easier to use. Onboard 0.99inch 128×115 pixels 65K colorful IPS LCD display (with flat bottom) for clear color pictures 4 x GPIO pins are adapted through SH1.0 6PIN connector. Adopts CNC metal case with Acrylic dull-polish bottom plate. USB 1.1 with device and host support Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. 2 x I2C, 4 x 12-bit ADC. Accurate clock and timer on-chip. Built-in Temperature sensor. Accelerated floating-point libraries on-chip. 8 x Programmable I/O (PIO) state machines for custom peripheral support

Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 264KB of SRAM, and 4MB of onboard Flash memory. Onboard CH9120 with integrated TCP/IP protocol stack 14 × multi-function GPIO pins, compatible with some Pico HATs. Castellated module allows soldering direct to carrier boards Drag-and-drop programming using mass storage over USB. Temperature sensor 8 × Programmable I/O (PIO) state machines for custom peripheral support

Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz, 264KB of SRAM, and 2MB of on-board Flash memory, USB-C connector, keeps it up to date, easier to use With 0.96inch 160×80 pixels 65K colorful IPS LCD display, Onboard Lithium batt recharge/discharge header, DC-DC chip TPS63000, 26 × multi-function GPIO pins, 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels USB 1.1 with device and host support, Low-power sleep and dormant modes, Drag-and-drop programming using mass storage over USB, Temperature sensor Accurate clock and timer on-chip, Accelerated floating-point libraries on-chip, 8 × Programmable I/O (PIO) state machines for custom peripheral support For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly. Please refer to the online user manual while using 0.96 65k colorful ips lcd based on raspberry pi rp2040 pico-like

Waveshare RP2040-Matrix-Entwicklungsplatine, integrierte 5×5 RGB-LED-Matrix, basierend auf dem offiziellen RP2040-Dual-Core-ProzessorRP2040-Mikrocontroller-Chip, entwickelt von Raspberry Pi im Vereinigten KönigreichDual-Core-Arm-Cortex-M0+-Prozessor, flexibler Takt mit bis zu 133 MHz264 KB SRAM und 2 MB integrierter Flash-SpeicherOnboard 5 × 5 RGB-LED-Matrix für farbenfrohe LichtanzeigeKastelliertes Modul ermöglicht das direkte Löten auf TrägerplatinenUSB 1.1 mit Geräte- und Host-UnterstützungEnergiesparender Schlaf- und RuhemodusDrag-and-Drop-Programmierung mit Massenspeicher über USB20 × Multifunktions-GPIO-Pins2 × SPI, 2 × I2C, 2 × UART, 4 × 12-Bit-ADC, 16 × steuerbare PWM-KanäleGenaue Uhr und Timer auf dem ChipTemperatursensorBeschleunigte Gleitkomma-Bibliotheken auf dem Chip8 × Programmierbare I/O (PIO)-Zustandsmaschinen für benutzerdefinierte Peripherieunterstützungunterstützt C/C++, MicroPython, ArduinoWas ist an Bord?USB-Typ-C-Anschluss5×5 RGB-LED-MatrixBOOT-TasteDrücken Sie diese beim Zurücksetzen, um in den Download-

Das Waveshare RP2040-LCD-1.28-B ist ein Mikrocontroller-Board, das auf dem RP2040-Chip von Raspberry Pi basiert. Es verfügt über ein kompaktes Design mit einem CNC-gefertigten Metallgehäuse und einer Acryl-Unterseite. Das Board ist mit einem 1.28 Zoll runden IPS-LCD-Display mit 240x240 Pixeln und 65K Farben ausgestattet. Zusätzlich ist ein Lithium-Ionen-Akku-Manager integriert, der das gleichzeitige Laden und den Betrieb des Boards ermöglicht. Ein 6-Achsen-Sensor bestehend aus einem 3-Achsen-Beschleunigungsmesser und einem 3-Achsen-Gyroskop (QMI8658C) ist ebenfalls auf dem Board verbaut. Alle 30 GPIO- und Debug-Pins sind über einen 1.27 mm Rastermaß-Header zugänglich, was die Integration in eigene Schaltungen und Entwicklungsprojekte unterstützt. Das Board wird über USB Typ-C mit Strom versorgt und unterstützt Drag-and-Drop-Programmierung über USB. Unterstützte Programmiersprachen sind C/C++ und MicroPython; als Entwicklungsumgebungen werden Visual Studio Code und Eclipse genannt.

RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz(3pcs) 264KB of SRAM, and 2MB of on-board Flash memory. USB-C connector, keeps it up to date, easier to use Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes Drag-and-drop programming using mass storage over USB. 29 × multi-function GPIO pins (20× via edge pinout, others via solder points). 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels Accurate clock and timer on-chip Temperature sensor. Accelerated floating-point libraries on-chip. 8 × Programmable I/O (PIO) state machines for custom peripheral support RP2040-Zero, A Low-Cost, High-Performance Pico-Like MCU Board Based On Raspberry Pi Microcontroller RP2040

Waveshare RP2040-Plus MCU board based on Raspberry Pi RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins 264KB of SRAM, and 4MB of on-board Flash memory Onboard USB-C connector, Lithium battery recharge/discharge header, and DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch 26 × multi-function GPIO pins, configurable pin function, allows flexible development and integration Support C/C++，MicroPython, comprehensive SDK, dev resources, tutorials to help you easily get started

RP2040 MCU-Platine, mit rundem 1,28-Zoll-LCD, Beschleunigungsmesser und Gyroskopsensor, basierend auf Raspberry Pi RP2040RP2040-LCD-1.28 ist ein kostengünstiges, leistungsstarkes MCU-Board, das von Waveshare entwickelt wurde. Winzige Größe mit integriertem rundem 1,28-Zoll-LCD-Display, Lithium-Ionen-Akkulademanager, 6-Achsen-Sensor (3-Achsen-Beschleunigungsmesser und 3-Achsen-Gyroskop) usw., der alle GPIO- und Debug-Pins anpasst, was es Ihnen leicht macht schnell entwickeln und in Produkte integrieren.Zu den Hauptfunktionen gehören:RP2040-Mikrocontroller-Chip, entwickelt von Raspberry PiDual-Core Arm Cortex M0+ Prozessor, flexibler Takt mit bis zu 133 MHz264 KB SRAM und 2 MB integrierter Flash-SpeicherTyp-C-Anschluss, hält es auf dem neuesten Stand, einfacher zu verwendenOnboard 1,28 Zoll 240 x 240 Pixel 65K farbenfrohes IPS-LCD-Display für klare FarbbilderLade-/Entladekopf für Lithiumbatterien, geeignet für MobilgeräteAlle GPIO-Pins werden durch 1,27-Pitch-Buchsenleisten angepasst (es gibt insgesamt 30 Pins, aber einige Pins

★【Based on Raspberry Pi's RP2040 chip】Dual-core arm cortex M0+ processor, flexible clock running up to 133 MHz, RP2040-LCD-0.96, a low-cost, high-performance Pico-like MCU board based on Raspberry Pi microcontroller RP2040 ★【Onboard 0.96 inch LCD Display】0.96inch 160×80 pixels 65K colorful IPS LCD display ★【26 × multi-function GPIO pins】Configurable pin function, allows flexible development and integration ★【Tiny size, easy integration】264KB of SRAM, and 2MB of on-board Flash memory, onboard Lithium battery recharge/discharge header, high efficiency DC-DC buck-boost chip, USB-C connector ★【C/C++, MicroPython support】Either C/C++ SDK, or MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly

Suitable for Raspbery Pi Pico hardware debug Onboard 3PIN SWD port for connecting the debugged target board Standard CMSIS-DAP interface can be used to debug most ARM-based microcontrollers Works with OpenOCD and other tools supporting CMSIS-DAP Adopts the Raspberry Pi 3PIN Debug Connector Specification Onboard 3PIN USB to UART bridge. Onboard 4PIN I2C port for the testing target board. Onboard 1.14inch 240×135 pixels 65K color IPS LCD display. Equipped with plastic case and cables. Open-source firmware, more convenient to upgrade

RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz(2pcs) 264KB of SRAM, and 2MB of on-board Flash memory. USB-C connector, keeps it up to date, easier to use Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes Drag-and-drop programming using mass storage over USB. 29 × multi-function GPIO pins (20× via edge pinout, others via solder points). 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels Accurate clock and timer on-chip Temperature sensor. Accelerated floating-point libraries on-chip. 8 × Programmable I/O (PIO) state machines for custom peripheral support

RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz(3pcs, with pre-soldered header) 264KB of SRAM, and 2MB of on-board Flash memory. USB-C connector, keeps it up to date, easier to use Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes Drag-and-drop programming using mass storage over USB. 29 × multi-function GPIO pins (20× via edge pinout, others via solder points). 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels Accurate clock and timer on-chip Temperature sensor. Accelerated floating-point libraries on-chip. 8 × Programmable I/O (PIO) state machines for custom peripheral support RP2040-Zero, A Low-Cost, High-Performance Pico-Like MCU Board Based On Raspberry Pi Microcontroller RP2040

RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz(2pcs, with pre-soldered header) 264KB of SRAM, and 2MB of on-board Flash memory. USB-C connector, keeps it up to date, easier to use Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes Drag-and-drop programming using mass storage over USB. 29 × multi-function GPIO pins (20× via edge pinout, others via solder points). 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels Accurate clock and timer on-chip Temperature sensor. Accelerated floating-point libraries on-chip. 8 × Programmable I/O (PIO) state machines for custom peripheral support RP2040-Zero, A Low-Cost, High-Performance Pico-Like MCU Board Based On Raspberry Pi Microcontroller RP2040

HF version: 850 ~ 930MHz frequency, Applicable to Europe, North America and Oceania. Comes with RP2040-LoRa-HF, USB port adapter board & FPC cable. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz. 264KB of SRAM, and 2MB of onboard Flash memory Onboard FPC 8PIN connector, adapting USB Type-C port via adapter board. Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB, up to 20 × multi-function GPIO pins Supports FSK, GFSK, LoRa modulation, featuring better anti-blocking and ultra-long distance communication. Supports preamble detection, with CRC, up to 256 bytes data packet engine With -148dBm high reception sensitivity and programmable emit power up to 22dBm. Can provide with online resources and manual (example in C)

Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz. 264KB of SRAM, and 16MB of on-board Flash memory. Onboard 1.28inch capacitive touch display, 240×240 resolution, 65K color Type-C connector, keeps it up to date, easier to use. Lithium batt recharge/discharge header, suitable for mobile devices. Adopts CNC metal case with Acrylic dull-polish bottom plate. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. Accurate clock and timer on-chip. Built-in Temperature sensor. 6 x GPIO pin via SH1.0 connector

LF version: 410 ~ 525MHz frequency. Applicable to Europe, Asia. Comes with RP2040-LoRa-LF, USB port adapter board & FPC cable. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz. 264KB of SRAM, and 2MB of onboard Flash memory Onboard FPC 8PIN connector, adapting USB Type-C port via adapter board. Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB, up to 20 × multi-function GPIO pins Supports FSK, GFSK, LoRa modulation, featuring better anti-blocking and ultra-long distance communication. Supports preamble detection, with CRC, up to 256 bytes data packet engine With -148dBm high reception sensitivity and programmable emit power up to 22dBm. Can provide with online resources and manual (example in C)

RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 264KB of SRAM, and 16MB of onboard Flash memory Type-C connector, keeps it up to date, easier to use Onboard 1.69inch capacitive touch display, 240×280 resolution, 65K color. Lithium batt recharge/discharge header, suitable for mobile devices Onboard RTC chip and RTC batt header for timing and scheduling functions. Onboard buzzer for sound-producing peripheral USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. Accurate clock and timer on-chip. Temperature sensor

Comprehensive SDK, Dev resources, tutorials to help you easily get started. Small Size, touch more possibilities.Suitable for various smart devices development, can realize human-computer interaction function. Dual-Core Arm Processor.Dual-Core Arm Cortex M0+ Processor, Flexible Clock Running Up To 133 MHz. For more product parameters and application resources, please refer to the picture introduction or contact store customer service through the Amazon.

RP2040-PiZero is a high-performance and cost-effective microcontroller board designed by Waveshare, onboard DVI interface, TF card slot and PIO-USB port, compatible with Raspberry Pi 40PIN GPIO header, easy to develop and integrate into the products Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz. 264KB of SRAM, and 16MB of onboard Flash memory. Onboard DVI interface can drive most HDMI screens (DVI compatibility required) Supports using as a USB host or slave via onboard PIO-USB port. Onboard TF card slot for reading and writing TF card. Onboard Lithium batt recharge/discharge header, suitable for mobile scenarios. USB 1.1 with device and host support Drag-and-drop programming using mass storage over USB. Low-power sleep and dormant modes. 2 x SPI, 2 x I2C, 2 x UART, 4 x 12-bit ADC, 16 x controllable PWM channels Accurate clock and timer on-chip. With Built-in Temperature sensor. Accelerated floating-point libraries on-chip. 8 x Programmable I/O (PIO) state machines for custom peripheral support

Note: Based on RP2040,our store design some micro board with options for interfaces and different functions.Please contact the customer service or refer the product pictures to know the details and confirm it before placing the order. Dual-Core Arm Processor,Dual-Core Arm Cortex M0+ Processor, High Operating Performance ,Flexible Clock Running Up To 133 MHz. 20X Multi-Function GPIO Pins,configurable Pin Function, Allows Flexible Development And Integration. Compatible with C/C++, MicroPython, Ar-duino.Comprehensive SDK, Dev resources, Tutorials to help you easily get started. Adopting a half hole process, it can be welded onto customized boards.

Waveshare RP2040 Mikrocontroller Entwicklungsplatine mit Beschleunigungsmesser, Gyroskop-Sensor Entwicklungsplatine mit 1,28 Zoll rundem...

Integrierter ST7735-Treiberchip 0,85-Zoll-IPS-Display mit einer Auflösung von 128x128 Pixeln und Unterstützung von 65.000 Farben für...

Integrierter ST7735-Treiberchip 0,85-Zoll-IPS-Display mit einer Auflösung von 128x128 Pixeln und Unterstützung von 65.000 Farben für...