waveshare lcd

ESP32-C6-LCD-1.3, Standard version(without header) ESP32-C6 Suitable For AIoT Applications: Equipped With A High-Performance 32-Bit RISC-V Processor And A Low-Power 32-Bit RISC-V Processor Wi-Fi 6 And BLE 5 Support: Supports Wi-Fi 6, BT 5 And IEEE 802.15.4 (Zigbee 3.0 And Thread). Its BT Low Energy Subsystem Supports BT 5 (LE) And BT Mesh Supports ESP-IDF: Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

240×320 resolution, 262K colors, clear and colorful displaying effect High touch screen transmittance, fast response and long lifetime Embedded with ST7789T3 driver chip and CST328 capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins Adapting 13PIN connector and 18PIN FPC slot for connecting the LCD module to the host board Onboard voltage translator, compatible with 3.3V / 5V operating voltage Provide online development resources and E-manual (examples for Raspberry Pi / ESP32S3 / Raspberry Pi Pico ),please contact us via Amazon

Resistive touch screen TFT LCD, 2.8inch, 320x240 resolution. Standard interface,for development boards like:Leonardo/NUCLEO Onboard stand-alone touch controller, better touching than solutions that use AD pins directly for touch control Memory card slot, provides an easy way to store photos for displaying. Controlled via SPI, only a few pins are used. Backlight adjustable by program, lower power consumption.

Provide online user manual (wiki), please check the manual carefully before using! 7-inch IPS screen with a hardware resolution of 1024x600. Design Based on Raspberry Pi 40pin GPIO interface. Drive LCD via DPI interface of Raspberry Pi. Supports operating systems like Raspberry Pi OS/Ubuntu. Backlight control to lower power consumption. Compact size, suit for various projects. This LCD can only be used for displaying, if you require a touchscreen, please purchase 7inch HDMI LCD(C)(capacitive) or 7inch HDMI LCD(resistive).

3.5inch 480 x 320 resolution Touch Screen TFT LCD Specifically Designed for Raspberry Pi all Versions Supports 125MHz high-speed SPI signal transmission, and the display is clear and stable When used for Raspberry Pi,supports Raspbian/Ubuntu MATE/Kali/Retropie and driver provided; supports FBCP software driver, allows setting software resolution and dual-display Resistive touch control, sized for the Raspberry Pi Immersion gold craftsmanship, finely crafted

RP2350-Touch-LCD-1.54, with touch control. Adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz Built-in 512KB Static RAM, with onboard 16MB Flash. Type-C port for easier use Onboard 1.54inch LCD display, 240 x 240 resolution, 65K color. USB 1.1 with device and host support. Low-power sleep and dormant modes Drag-and-drop programming using mass storage over USB. Adapting 4 x multi-functional GPIO pins. 1 x I2C, 1 x UART, 2 x 12-bit ADC, 2 x controllable PWM channels Accurate clock and timer on-chip. Built-in temperature sensor for real-time monitoring of chip temperature. 12 x programmable I/O (PIO) state machines for custom peripheral support

1.3inch IPS LCD Main Screen with built in ST7789 driver chip, SPI interface communication, wide viewing angle, supports 65K color display, 240×240 resolution Dual 0.96inch LCD secondary screens with built in ST7735S driver chip, SPI interface communication, supports 65K color display, 160×80 resolution, can be used to display key informations, status indicator messages or small graphics Standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi series boards Onboard 2x user-defined keys for extended applications Provide online development resources and manual for Raspberry Pi/VisionFive2/STM32, etc. Please obtain it from our online customer service

1.3-inch IPS screen, built-in ST7789 driver chip, using SPI interface communication Onboard 65K color display screen, 240 × 240 resolution high-definition display Onboard 12 custom buttons, comfortable design, smooth operation 1.3-inch IPS screen, presenting 65K color delicate display, bringing high-definition visual experience Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

Raspberry Pi Pico is NOT included. 240×135 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect. SPI interface, requires minimal IO pins. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples). Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico 1x Joystick And 2x User Buttons For Easy Interacting

The hardware resolution is 320 × 240. Resistive touch control. It is compatible and can be directly inserted into any version of Raspberry Pi. Drivers provided (works with your own Raspbian/Ubuntu/Kali and Retropie system directly). Support FBCP software driver, can set the software resolution and dual-screen display. The LCD must have a driver installed for normal use. For details, please refer to the relevant introduction in the user manual.

172x320 resolution, 262K colors, clear and colorful displaying effect High touch screen transmittance, fast response and long lifetime Embedded ST7789V2 driver chip and CST816 capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins, supports controller boards like Raspberry Pi / ESP32S3 / Raspberry Pi Pico Can provide online development resources and manual (examples for Raspberry Pi / ESP32S3 / Raspberry Pi Pico )

Adopts 0.71inch round LCD display, IPS panel, wide viewing angle 160x160 resolution, 65K colors, clear and colorful displaying effect SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi Pico/ESP32

This 15.6inch IPS screen, with 1920x1080 high rsolution, toughened class cover, supports multi mini-PCs, multi systems. HDMI/VGA Display Port, IPS Display Panel, 178° Viewing Angle, USB Touch Port, Polycarbonate Enclosure. Up to 6H hardness toughened glass panel. Used with Raspberry Pi, it supports Raspberry Pi OS/Ubuntu/Kali and Retropie. Used as a computer monitor, it supports Windows 11/10/8.1/8/7. Up to 10-points touch, depending on the operating system. Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc. with 3.5mm audio jack, supports HDMI audio output. Provide online user manual. with usage guidance for working with Raspberry Pi/PC etc.

Please note:fbtft_device and flexfb are gone in 5.4.fbtft_device was removed because the gpio code had been reworked without fixing up fbtft_device so it didn't work. This is an IPS LCD display HAT for Raspberry Pi, 1.3inch diagonal, 240x240 pixels, with embedded controller, communicating via SPI interface.Standard Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ IPS screen, wide viewing angle, better display High definition in small size 1x joystick, 3x pushbuttons, handy and useful Comes with development resources and manual (examples for Raspberry Pi) Driver: ST7789;Display color: RGB, 65K color;perating voltage: 3.3V

Designed by Raspberry Pi UK: The RP2350B microcontroller features a unique dual-core, dual-architecture design, supporting either dual ARM Cortex-M33 or dual Hazard3 RISC-V processors with a flexible clock speed up to 150 MHz. Sufficient On-Chip Memory: Comes with 520 KB of static RAM and 16 MB of onboard flash memory, providing enough space for program execution and data storage. Easy Connectivity & Clear Display: Equipped with an onboard Type-C port for simple use and broad compatibility, plus a 3.5-inch capacitive touch IPS display offering 320×480 resolution and 65K colors. Efficient Display & Camera Functions: Integrates an ST7796 display driver and FT6336 touch controller using SPI and I2C to save I/O, and includes a camera interface compatible with OV2640, OV5640, and similar models for image and video capture. Flexible Power & Rich Interfaces: Offers a 3.7 V lithium batt header, USB 1.1 host/device support, low-power sleep/dormant modes, drag-and-drop USB programming, 22 multifunctional GPIOs, and multiple standard interfaces for versatile expansion.

Waveshare Triple LCD HAT für Raspberry Pi: Hauptbildschirm mit 1.3 Zoll IPS LCD und zwei sekundären 0.96 Zoll IPS LCDs Der Waveshare Triple LCD HAT für Raspberry Pi verfügt über einen 1.3 Zoll Hauptbildschirm und zwei 0.96 Zoll sekundäre Bildschirme. Er ist mit allen Raspberry Pi-Serienplatinen kompatibel und bietet durch SPI-Kommunikation eine 65K-Farbanzeige. Merkmale im Überblick Standard Raspberry Pi 40PIN GPIO Header, kompatibel mit Raspberry Pi Serienplatinen Stromversorgung: 3.3V Arbeitsstrom: 840mA Abmessungen: 65.00 x 31.00(mm) 1.3 Zoll IPS LCD Hauptbildschirm mit ST7789 Treiberchip, SPI-Schnittstelle, 240×240 Auflösung Dual 0.96 Zoll LCD sekundäre Bildschirme mit ST7735S Treiberchip, 160×80 Auflösung Onboard 2x benutzerdefinierte Tasten für erweiterte

320x240 hardware resolution. Resistive touch control. Supports any revision of Raspberry Pi (directly-pluggable). Drivers provided (works with your own Raspbian/Ubuntu/Kali). Supports FBCP software driver as well, allows to config software resolution and set up dual-display. Size perfectly fits the Pi (Raspberry Pi B+/2B/3B/3B+). 4 user keys. High quality immersion gold surface plating. Combined with the Raspberry Pi, allows you to: Take photos by touching (up to 17 camera modes). Use software keyboard (system interaction without keyboard/mouse).

5-inch Resistive Touch Screen LCD, with a resolution of 800 × 480, supports Raspberry Pi and can also be used as a computer monitor. Resistive touch control. Support backlight control, more power saving. Using Raspberry Pi, it supports Raspbian/Ubuntu/Kali/WIN10 IoT, single point touch, driver free; Supports Retropie, driver free. Using as a computer monitor, it supports Windows 11/10/8.1/8/7, single point touch, driver free. Provide online user manual (wiki), please check the manual carefully before using!

This is the RGB LCD driver board only, not include any size touch LCD. For more detailed part list, please refer to the Package Content image . Adopts ESP32-S3-WROOM-1-N8R8 module with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz. Integrated 512KB SRAM, 384KB ROM, 8MB PSRAM, 8MB Flash memory. Integrated 2.4GHz W-Fi and Blue-T LE dual-mode wire-less communication, with superior RF performance. Type-C connector, easier to use. Onboard 40Pin SPI+RGB and 18Pin SPI LCD screen connector, strong compatibility and expandability Onboard Lithium batt recharge manager ETA6096 and MX1.25 lithium batt header Castellated module allows soldering direct to carrier boards Supports multiple low-power operating states, adjustable balance between communication distance, data rate and power consumption to meet the power requirements of various application scenarios

3.5" touch display module for Raspberry Pi Pico, 480×320 resolution, IPS touch screen, 65K colors, clear and colorful displaying effect ILI9488 driver, using SPI bus, 5V operating voltage, onboard female pin header, compatible with Raspberry Pi Pico header Dedicated resistive touch controller XPT2046, bringing more smooth touching effect than AD-controlled solutions MicroSD card slot for storing images and direct displaying them easily Programmable backlight control, power saving

480x320 hardware resolution;Resistive touch control;Supports any revision of Raspberry Pi (directly-pluggable) 125MHz High-Speed SPI signal transmission, clear & stable display effect Drivers provided (works with your own Raspbian/Ubuntu/Kali directly) Supports FBCP software driver as well, it is possible to config software resolution and dual-screen display Combined with the 50Hz refresh rate Raspberry Pi, allows you to: Watch videos (multi formats like MP4) Play video games (RetroPie, take a bite) Take photos by touching (up to 17 camera modes) Support software keyboard (system interaction without keyboard/mouse)

10.1inch IPS screen,1024 × 600 high resolution. Resistive touch control. Compatible and Direct-connect with any revision of Raspberry Pi (If you are using a Raspberry Pi Zero/Zero 2 W, an additional HDMI cable is required). Supports Raspberry Pi OS/Ubuntu/Kali and Retropie systems. Also works as a computer monitor, in this case, the touch panel is unavailable and an HDMI cable is required. HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os). OSD menu, supports brightness/contrast ratio adjustable manually.

The ESP32-S3-LCD-1.47B features a high-performance Xtensa 32-bit LX7 dual-core processor, running at up to 240MHz, ideal for advanced HMI applications. It supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) with an onboard antenna, ensuring reliable wireless connectivity. The board is equipped with 512KB SRAM, 384KB ROM, 16MB Flash, and 8MB PSRAM, providing sufficient storage for efficient operation and program execution. It includes a 1.47-inch LCD display with 172×320 resolution and 262K colors, alongside a 6-axis IMU for motion sensing and gesture detection. The ESP32-S3-LCD-1.47B features multiple I/O interfaces, a TF card slot for external storage, a batt charging module, and low-power modes for versatile and efficient use in various scenarios. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

5-inch capacitive touch screen with a hardware resolution of 800 × 480. 5-point capacitive touch control, tempered glass panel, hardness up to 6H. When works with Raspberry Pi, supports Raspbian, 5-points touch, driver free;supports Ubuntu/Kali/Retropie/WIN10 IOT,single point touch, driver free;Supports Retropie, driver free. When works with Jetson Nano,Supports Ubuntu, single point touch, driver free. When working as a computer monitor, supports Windows 11/10/8.1/8/7,five-points touch, driver free. Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc. It has a 3.5mm audio jack and supports HDMI audio output. Supports VGA input (specific cable is required and should be purchase separately). Provide online user manual (wiki), please check the manual carefully before using!

Compact and Clear Display: The board features a 1.69-inch IPS LCD with a resolution of 240×280, providing vibrant and clear visuals. Built-in Wi-Fi 6 and BT 5.0: With support for Wi-Fi 6, BT 5.0, and IEEE 802.15.4 (Zigbee and Thread), this board offers advanced and reliable wireless connectivity options, making it ideal for Internet of Things (IoT) and smart device applications. Powerful ESP32-C6 Chip: The board is powered by the ESP32-C6 chip, which integrates a RISC-V core, providing efficient processing power for handling complex tasks, AI applications, and multi-tasking operations with ease. Comprehensive Sensor Support: Equipped with the QMI8658 6-axis IMU sensor and the PCF85063 real-time clock chip, this board supports motion detection, precise time management, and enables real-time data processing for embedded applications. Versatile and Portable: Designed for flexibility, the ESP32-C6 1.69-inch LCD development board is perfect for various embedded projects, including wearable devices, robotics, and AI applications. With its integrated lithium batt charging support, it ensures portability and continuous operation. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

240×240 resolution, 65K RGB colors, clear and colorful displaying effect SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32 Comes with development resources (examples for Raspberry Pi/Arduino/STM32) Embedded GC9A01 Driver, Using SPI Bus

High resolution: 1024x600, capacitive touch control panel Compatible with Raspberry Pi, PC and other devices Supports multiple systems: RPi OS/Ubuntu/Kali/Retropie/Windows 11 / 10 / 8.1 / 8 / 7 Multiple video input interfaces: HDMI, VGA and AV(CVBS) Multilingual OSD menu for easy power control, brightness/contrast adjustment and more

Compact and Clear Touch Display: The board features a 1.69-inch IPS LCD with a resolution of 240×280, providing vibrant and clear visuals. The capacitive touch interface ensures smooth, responsive touch control for a seamless user experience. Built-in Wi-Fi 6 and BT 5.0: With support for Wi-Fi 6, BT 5.0, and IEEE 802.15.4 (Zigbee and Thread), this board offers advanced and reliable wireless connectivity options, making it ideal for Internet of Things (IoT) and smart device applications. Powerful ESP32-C6 Chip: The board is powered by the ESP32-C6 chip, which integrates a RISC-V core, providing efficient processing power for handling complex tasks, AI applications, and multi-tasking operations with ease. Comprehensive Sensor Support: Equipped with the QMI8658 6-axis IMU sensor and the PCF85063 real-time clock chip, this board supports motion detection, precise time management, and enables real-time data processing for embedded applications. Versatile and Portable: Designed for flexibility, the ESP32-C6 1.69-inch LCD development board is perfect for various embedded projects, including wearable devices, robotics, and AI applications. With its integrated lithium batt charging support, it ensures portability and continuous operation. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

1.28inch round LCD display module with touch panel, 240×240 resolution IPS screen, 65K colors, clear and colorful displaying effect Embedded GC9A01 driver chip and CST816S capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins, supports controller boards like Raspberry Pi/Raspberry Pi Pico/Arduino/STM32 High touch screen transmittance, fast response and long lifetime, suitable for various smart devices development, can realize human-computer interaction function Comes with online development resources and manual (examples for Raspberry Pi/Raspberry Pi Pico/Arduino/STM32)

Built-in ST7735 driver chip. 0.85inch IPS display, 128 × 128 resolution, 65K color Supports SPI communication interfaces for easy embedded development, effectively saving the IO resources 2.5D tempered glass panel with excellent light transmission, scratch-resistant and durable, with rounded edges for a smooth, comfortable feel Mechanical switch design (optional) with better tactile experience, effortlessly handling frequent operations Suitable for Raspberry Pi applications in remote communication or other industrial situations