waveshare lcd

1.3inch LCD Display HAT with standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards High definition in small size, 240x240 pixels, RGB 65K display color, with embedded controller, communicating via SPI interface IPS screen, wide viewing angle, better display 1x joystick, 3x pushbuttons, handy and useful Comes with development resources and manual (examples for Raspberry Pi)

The ESP32-S3-LCD-1.47B features a high-performance Xtensa 32-bit LX7 dual-core processor, running at up to 240MHz, ideal for advanced HMI applications. It supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE) with an onboard antenna, ensuring reliable wireless connectivity. The board is equipped with 512KB SRAM, 384KB ROM, 16MB Flash, and 8MB PSRAM, providing sufficient storage for efficient operation and program execution. It includes a 1.47-inch LCD display with 172×320 resolution and 262K colors, alongside a 6-axis IMU for motion sensing and gesture detection. The ESP32-S3-LCD-1.47B features multiple I/O interfaces, a TF card slot for external storage, a batt charging module, and low-power modes for versatile and efficient use in various scenarios. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

10.1inch Capacitive Touch Screen LCD (E), 1024 × 600, HDMI, IPS,Supports Raspberry Pi, Jetson Nano, PC and Game Console. Toughened glass panel features 6H hardness and 10-Points capacitive touch. Fully Laminated for better touching. When used with Raspberry Pi, supports Raspbian, 10-points touch, driver free;Supports Ubuntu/Kali/WIN10 IoT, single point touch, driver free;Supports Retropie, driver free. When used with Jetson Nano,supports Ubuntu, single point touch, driver free. When used as a computer monitor, it supports Windows 11/10/8.1/8/7,10-points touch, driver free. Features 3.5mm Headphone jack and 4PIN audio interface for HDMI audio. Supports common game consoles. Backlight is controllable for power saving.

The display orientation is portrait by default, with 480×1920 resolution (H×V). Change the software config for landscape display. Adjustable Brightness Via Software Supports Raspberry Pi OS, 10-point touch, driver free for new version system Excellent Display Performance With 178° Wide Viewing Angle up to 10-point touch, depending on the operating system up to 6H hardness toughened glass panel Optical Bonding, provides clear image Working with Raspberry Pi 5 and Raspberry Pi 4B,power the LCD through the pogo 5V pin; Working with Compute Module 4 IO Board,power the LCD through the GPIO 5V pin Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

7inch IPS screen, 1024 x 600 hardware resolution, configurable by software (up to 1920 x 1080). Toughened glass capacitive touch panel, 6H hardness (case version only). When used with Raspberry Pi, supports Raspbian, 5-points touch, driver free;Supports Ubuntu/Kali/WIN10 IoT, single point touch, driver free;Supports Retropie, driver free. Use with Jetson Nano,supports Ubuntu, single point touch, driver free Use with Windows PC, support Windows 11/10/8.1/8/7, 5-points touch, driver free. Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc. It has a 3.5mm audio jack and supports HDMI audio output. Supports VGA input (specific cable is required and should be purchase separately). High-quality PC case, optional tilt angle: 30°/50°(case version only).

Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BlE 5 (LE), with onboard antenna Built-in 512KB Static RAM and 384KB ROM, with onboard 16MB Flash and 8MB PS-RAM Onboard 1.47inch LCD display, 172×320 resolution, 262K color Adapting multiple IO interfaces, integrates full-speed USB port Onboard TF card slot for external TF card storage of pictures or files Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios Built-in RGB LED with clear acrylic sandwich panel for cool lighting effects

Provide online user manual (wiki), please check the manual carefully before using! Note: This LCD can only be used with Raspberry Pi and cannot be used with PC. 5 inch Resistive Touch Screen LCD, HDMI interface,800 x 480 hardware resolution. Compatible and Direct-connect with any revision of Raspberry Pi. (If you are using a Raspberry Pi Zero/Zero 2 W, an additional HDMI cable is required). Supports Raspberry Pi OS/Ubuntu/Kali and Retropie systems (Driver Provided). Support backlight control, more power saving. Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required. HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os).

240×280 resolution, 262K colors, clear and colorful displaying effect High touch screen transmittance, fast response and long lifetime Embedded ST7789V2 driver chip and CST816T capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins, supports controller boards like Raspberry Pi / ESP32S3 / Raspberry Pi Pico / Arduino / STM32 Comes with online development resources and manual (examples for Raspberry Pi / ESP32S3 / Raspberry Pi Pico / Arduino / STM32) Compatible With 3.3V / 5V Power Input

The display orientation is portrait by default, with 720×1280 resolution (H×V). Change the software config for landscape display. Adjustable Brightness Via Software Supports Raspberry Pi OS, 5-point touch, driver free for new version system 720 × 1280 resolution, provides clear image and vivid color display effect Excellent Display Performance With 178° Wide Viewing Angle up to 5-point touch, depending on the operating system up to 6H hardness toughened glass panel Optical Bonding, provides clear image, Working with Raspberry Pi 5 and Raspberry Pi 4B,power the LCD through the pogo 5V pin; Working with Compute Module 4 IO Board,power the LCD through the GPIO 5V pin Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

Note: it can only compatible with Raspberry Pi and it can't be used as computer monitor under windows system. 800x480 high hardware resolution; Resistive touch control Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie) HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) Backlight can be turned off to lower power consumption; High quality immersion gold surface plating

Onboard 2.1inch capacitive touch screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Onboard 2.1inch capacitive touch display, 480×480 resolution, 262K color Adapting UART, I2C and some IO interfaces, integrates full-speed USB port. Onboard QMI8658 6-axis sensor, RTC sensor, TF card slot and batt recharge management module, etc. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Supports touch control via I2C interface, with interrupt support

Note: This item can be used for displaying ONLY, if touch panel is required, please consider 7inch HDMI Capacitive Touch LCD OR 7inch HDMI Resistive Touch LCD.For Raspberry Pi,please set the config txt file as our wiki first,when you meet 7inch IPS screen, 1024x600 hardware resolution. Supports Raspbian, Ubuntu, OSMC, etc. Compatible with Raspberry Pi 2B/3B/3B+/3A+/Zero/Zero W/Zero WH. The LCD is directly driven by Raspberry Pi DPI interface, refresh rate up to 60Hz. Backlight can be turned off to lower power consumption. Compact size, suit for various projects.

✅ 1.44 Inch SPI LCD HAT for Raspberry Pi: Features a 1.44 inch diagonal RGB display with 128x128 resolution, ideal for adding a visual interface to Raspberry Pi projects. ✅ Built-in 5-Way Joystick and 3 Push Buttons: Integrated joystick and buttons allow for quick, interactive control directly on the display, perfect for mini UI development. ✅ High-Quality ST7735S Driver with 65K Colors: Uses ST7735S controller for vibrant RGB color rendering and smooth SPI communication, ensuring reliable and clear display output. ✅ Standard 40-Pin GPIO Extension Header: Fully compatible with Raspberry Pi 5, 4B, 3B+, 3A+, Zero series via standard GPIO interface, simple plug-and-play installation. ✅ Comes with Demo Codes and Documentation: Includes open-source example codes for Raspberry Pi, simplifying development and accelerating project creation for beginners and experts.

When used with Raspberry Pi, compatible with Raspberry Pi OS with ten touch (requires driver installation). Compatible with Raspberry Pi 4B/3B+/3A+, but some CM3/3+/4 expansion boards require additional adapter cables. Provide Raspberry Pi OS driver (please contact our 24-hour customer service via buyer/seller message to obtain relevant documents) Supports 10 touch points, but the actual number of touch points depends on the software system. Drive the LCD directly through Pi's DSI interface, with a refresh rate of up to 60Hz Using tempered glass touch cover, the hardness can reach 6H. Adopting full fit technology for clearer image quality and dustproof performance Backlight brightness can be adjusted through software Mainly used for smart homes, car devices, consumer electronics, and industrial equipment

Adopts 0.71inch round LCD display, IPS panel, wide viewing angle 160×160 resolution, 65K colors, clear and colorful displaying effect SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi Pico / ESP32 / Arduino Driver:GC9D01 Communication Interface:4-wire SPI

7.9Zoll Mini Bildschirm,the display orientation is portrait by default, 400×1280 resolution (H×V). Change the software config for landscape display. Supports Raspbian, 5-points touch, driver free. Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free Supports Ubuntu, single point touch, driver free Supports Windows 11/ 10 / 8.1 / 8 / 7, 5-points touch, driver free Supports Retropie, driver free.Supports all versions of Raspberry Pi

Waveshare 5inch DSI LCD Capacitive Touch Screen (800×480) Das Waveshare 5-Zoll-DSI-LCD ist ein kapazitives Touchscreen-Display mit einer Auflösung von 800×480 Pixeln und DSI-Schnittstelle. Es unterstützt bis zu fünf Berührungspunkte gleichzeitig und bietet eine reaktionsschnelle Bedienung über eine gehärtete Glasoberfläche. Das Display zeichnet sich durch geringen Stromverbrauch und vielseitige Kompatibilität mit verschiedenen Raspberry-Pi-Modellen aus. Über die DSI-Schnittstelle erfolgt die Datenübertragung direkt, ohne zusätzliche Treiberinstallation. Die Helligkeit kann softwareseitig angepasst werden, um eine optimale Darstellung zu gewährleisten. Das Display unterstützt Raspberry Pi OS, Ubuntu, Kali, WIN10 IoT, Retropie und RoPieee. Es ist vollständig treiberlos und ermöglicht unter Raspberry Pi OS eine 5-Punkt-Touch-Steuerung, während unter anderen

2,8 Zoll kapazitiver Touchscreen LCD für Raspberry Pi, 480×640, DPI, IPS, vollständig laminierte gehärtete Glasabdeckung, stromsparende Lösung

7-Zoll-Display für Raspberry Pi, 1024×600, DPI-Schnittstelle, IPS, No Touch

4-Zoll-Resistiv-Touchscreen-LCD, 480×800, HDMI, IPS, niedriger Stromverbrauch

4,3 Zoll kapazitives Touch-Display für Raspberry Pi, 800×480, IPS-Weitwinkel, MIPI DSI-Schnittstelle

7 Zoll kapazitives Touch-Display für Raspberry Pi, 800×480, DSI-Schnittstelle

7 Zoll Resistiver Touchscreen LCD, 1024×600, HDMI, IPS, Unterstützung verschiedener Geräte & Systeme

3,5 Zoll kapazitiver Touchscreen LCD für Raspberry Pi, 640×480, DPI, IPS, gehärtete Glasabdeckung, stromsparende Lösung

3,5-Zoll-Resistiv-Touchscreen-LCD, 480×320, HDMI, IPS, Unterstützung verschiedener Geräte und Systeme

3.5inch IPS Capacitive Touch LCD Display, 480×800, Adjustable Brightness

5-Zoll-Resistiv-Touchscreen-LCD, 800×480, HDMI, niedriger Stromverbrauch

5-Zoll-Display für Raspberry Pi, 800×480, DPI-Schnittstelle, IPS, No Touch

1.3inch Black/White Bicolor LCD with Embedded Memory, Low Power, Viewable under Strong Light

5Zoll kapazitives Touch-Display für Raspberry Pi, 800×480, DSI-Schnittstelle