waveshare epaper

The ESP32-S3-ePaper-3.97 is a high-performance, highly integrated microcontroller development board designed by Waveshare. Equipped with an ESP32-S3 microcontroller, supports dual-mode Wi-Fi and BLE communication. Onboard 3.97inch e-paper display, features ultra-low power consumption and ambient light readability, suitable for portable devices and long-Batt-life scenarios Integrated with an RTC chip, SHTC3 temperature and humidity sensor, TF card slot, low-power audio codec chip circuit, and Lithium Batt recharge management circuit. It provides a flexible and reliable development platform for IoT terminals, electronic tags, portable displays, and other applications Adopts ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built-in 512KB Static RAM, 384KB ROM, with integrated 8MB PStatic RAM and external 16MB Flash. Onboard 3.97inch e-paper display, 800 x 480 resolution, features high contrast and wide viewing angle. Onboard programmable PWR and BOOT side buttons for customized function development Onboard audio codec chip, supports voice capture and playback, enabling AI voice interaction applications. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc.. Onboard TG28 power management chip, supports 3.7V MX1.25 Lithium Batt for uninterrupted power supply, with a reserved backup Batt header to ensure continuous RTC functionality during main Batt replacement Onboard PCF85063 RTC chip and SHTC3 temperature & humidity sensor for accurate RTC management and environmental monitoring. Adopts TG28 chip for efficient power management, supports multiple voltage outputs, Batt charging, Batt management, and Batt life optimization, etc.. Type-C port, improving device compatibility, easier to use. Onboard TF card slot for storage expansion and rapid data transfer, suitable for data logging, media playback, and other applications, simplifying circuit design

2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W Comes with development resources and manual (examples for Raspberry Pi)

This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs E-Paper Display Panel E-ink Electronic Paper Screen arduino display arduino due epaper display epaper e-ink display

1.9inch Segment E-Paper Raw Display, 91 Segments, I2C Bus, Ideal For Temperature And Humidity Meter, Humidifier, Digital Meter Support Partial Refresh, Low Power, Wide Viewing Angle, Paper-Like Displaying Without Electricity No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Provide online user manual, please check the manual carefully before using!

Equipped with high-performance ESP32-C6 32-bit RISC-V processor, up to 160MHz main frequency. Supports Wi-Fi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance Built-in 512KB HP Static RAM, 16KB LP Static RAM, 320KB ROM, and external 16MB Flash memory. Onboard 1.54inch e-paper display, 200 × 200 resolution, features high contrast and wide viewing angle Onboard audio codec chip, supports voice capture and playback, enabling AI voice interaction applications. Onboard PCF85063 RTC chip and SHTC3 temperature & humidity sensor for accurate RTC management and environmental monitoring Onboard TF card slot for external storage of images or files. Onboard programmable PWR and BOOT side buttons for customized function development Reserved 2 × 6 2.54mm pitch pin header for convenient external expansion

Adopts high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna Built-in 512KB Static RAM, 384KB ROM, with integrated 8MB Flash and 8MB PSRAM.Onboard 1.54inch e-paper display, 200 × 200 resolution, features high contrast and wide viewing angle Onboard audio codec chip, supports voice capture and playback, enabling AI voice interaction applications. Onboard PCF85063 RTC chip and SHTC3 temperature & humidity sensor for accurate RTC management and environmental monitoring Onboard TF card slot for external storage of images or files. Onboard programmable PWR and BOOT side buttons for customized function development Reserved 2 × 6 2.54mm pitch pin header for convenient external expansion. Equipped with the FT6336 capacitive touch IC, enabling touch data transmission via the I2C communication interface, effectively reducing GPIO resource consumption and improving system resource utilization and expansion flexibility

5.79inch e-Paper Module (G) - with driver board. Onboard voltage translator, compatible with 3.3V / 5V MCUs No backlight, keeps displaying last content for a long time even when power down. Adapting SPI interface for Raspberry Pi/Jetson Series/STM32 controller boards Ultra low power consumption, basically power is only required for refreshing Can provide with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Series/STM32) Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

5.79inch e-Paper (G) - raw display, without driver board No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Can provide with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Series/STM32) Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

The ESP32-S3-ePaper-1.54G-EN is an e-Paper AIoT development board, equipped with ESP32-S3 microcontroller, which supports Wi-Fi and BLE dual-mode communication. Onboard 1.54inch e-paper display, features ultra-low power consumption and ambient light readability, suitable for portable devices and long-Batt-life scenarios Integrated with an RTC chip, SHTC3 temperature and humidity sensor, TF card slot, low-power audio codec chip circuit, and Li Batt recharge management circuit. Reserved interfaces including USB, UART, I2C, and GPIO for easy functionality expansion and sensor connectivity, providing a flexible and reliable development platform for IoT terminals, electronic tags, portable displays, and other applications Adopts high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi and BT 5 (LE), with onboard antenna. Built-in 512KB Static RAM, 384KB ROM, with integrated 8MB Flash and 8MB PStatic RAM Onboard 1.54inch e-paper display, 200 x 200 resolution, features high contrast and wide viewing angle. Onboard audio codec chip, supports voice capture and playback, enabling AI voice interaction applications. Onboard PCF85063 RTC chip and SHTC3 temperature & humidity sensor for accurate RTC management and environmental monitoring Onboard TF card slot for external storage of images or files. Onboard programmable PWR and BOOT side buttons for customized function development. Reserved 2 x 6 2.54mm pitch pin header for convenient external expansion

Note:Version 2 please use corresponding demo code .This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/Nucleo, etc.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards USB/SPI/I80 interface, for connecting with controller boards like Raspberry Pi/STM32, etc. Comes with development resources and manual (examples for Raspberry Pi/STM32) display e-paper e-ink hat raspberry pi high definition partial refresh wide viewing angle clear driver

The ESP32-S3-ePaper-3.97-EN(Without Batt) is a high-performance, highly integrated microcontroller development board designed by Waveshare. Equipped with an ESP32-S3 microcontroller, supports dual-mode Wi-Fi and BLE communication. Onboard 3.97inch e-paper display, features ultra-low power consumption and ambient light readability, suitable for portable devices and long-Batt-life scenarios Integrated with an RTC chip, SHTC3 temperature and humidity sensor, TF card slot, low-power audio codec chip circuit, and Lithium Batt recharge management circuit. It provides a flexible and reliable development platform for IoT terminals, electronic tags, portable displays, and other applications Adopts ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Built-in 512KB Static RAM, 384KB ROM, with integrated 8MB PStatic RAM and external 16MB Flash. Onboard 3.97inch e-paper display, 800 x 480 resolution, features high contrast and wide viewing angle. Onboard programmable PWR and BOOT side buttons for customized function development Onboard audio codec chip, supports voice capture and playback, enabling AI voice interaction applications. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc.. Onboard TG28 power management chip, supports 3.7V MX1.25 Lithium Batt for uninterrupted power supply, with a reserved backup Batt header to ensure continuous RTC functionality during main Batt replacement Onboard PCF85063 RTC chip and SHTC3 temperature & humidity sensor for accurate RTC management and environmental monitoring. Adopts TG28 chip for efficient power management, supports multiple voltage outputs, Batt charging, Batt management, and Batt life optimization, etc.. Type-C port, improving device compatibility, easier to use. Onboard TF card slot for storage expansion and rapid data transfer, suitable for data logging, media playback, and other applications, simplifying circuit design

Waveshare ESL-ePaper-Series (ESL-Eval-Kit-EU) Die ESL-ePaper-Series von Waveshare ist eine Reihe elektronischer Preisschilder mit E-Paper-Display-Technologie. Diese Displays bieten eine energieeffiziente Möglichkeit zur Anzeige von Informationen und sind besonders für den Einsatz im Einzelhandel, in der Industrie sowie für Asset- und Equipment-Labeling geeignet. Die Displays benötigen keine Hintergrundbeleuchtung und behalten das letzte angezeigte Bild auch ohne Stromzufuhr dauerhaft bei. Durch den Einsatz von E-Paper-Technologie basieren die Displays auf der Mikro-Kapsel-Elektrophorese. Dabei bewegen sich geladene Partikel in einer klaren Flüssigkeit unter Einfluss eines elektrischen Feldes. Diese Technologie ermöglicht eine kontrastreiche Darstellung, die das Umgebungslicht nutzt und eine hohe Lesbarkeit unter verschiedensten Lichtverhältnissen bietet. Merkmale im

No backlight required; keeps the last displayed content visible for a long time even after power-off Ultra low power consumption; basically power is only required for refreshing Features E‑Ink Spectra 6 full‑color E6 display with 240×240 resolution, delivering wide viewing angle over 170° for clear readability. Supports 3‑wire SPI and 4‑wire SPI interfaces; works with 3.3V raw panel or 3.3V/5V driver board power input for flexible host compatibility. 27‑second full refresh time, 2‑level greyscale support, ideal for low‑energy dashboard, label and embedded indicator projects.

No backlight required; keeps the last displayed content visible for a long time even after power-off Ultra low power consumption; basically power is only required for refreshing Features E‑Ink Spectra 6 full‑color E6 display with 240×240 resolution, delivering wide viewing angle over 170° for clear readability. Supports 3‑wire SPI and 4‑wire SPI interfaces; works with 3.3V raw panel or 3.3V/5V driver board power input for flexible host compatibility. 27‑second full refresh time, 2‑level greyscale support, ideal for low‑energy dashboard, label and embedded indicator projects.

ÜberblickDies ist ein E-Ink-Display-HAT V4 für Raspberry Pi, 2,13 Zoll, Auflösung 250x122, mit integriertem Controller, der über eine SPI-Schnittstelle kommuniziert und eine partielle Aktualisierung unterstützt. Aufgrund der Vorteile wie extrem geringer Stromverbrauch, großem Betrachtungswinkel und klarer Anzeige ohne Stromverbrauch ist es eine ideale Wahl für Anwendungen wie Regallabels, Industrieinstrumente usw.EigenschaftenKeine Hintergrundbeleuchtung, zeigt den letzten Inhalt auch bei Stromausfall noch lange an.Extrem geringer Stromverbrauch, Strom wird im Wesentlichen nur für die Aktualisierung benötigt.Kompatibel mit Raspberry Pi 4B/3B+/3B/Zero/Zero W/Zero WH.SPI-Schnittstelle zur Verbindung mit anderen Controller-Boards wie Arduino/Nucleo usw.Integrierter Spannungswandler, kompatibel mit 3,3V/5V Mikrocontrollern.Liefert Entwicklungsumgebung und Handbuch (Beispiele für Raspberry Pi/Arduino/STM32).SpezifikationenBetriebsspannung: 3,3V/5VSchnittstelle: SPIAbmessungen: 65mm × 30,2mmAnzeigefläche: 23,71mm × 48,55mmPunktabsta

RP2350A microcontroller chip designed by Raspberry Pi in the United Kingdom. Adopts unique dual-core and dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors support, flexible clock running up to 150 MHz Built-in 520KB Static RAM, with onboard 16MB Flash. Type-C port for easier use Onboard 1.54inch e-paper display, 200 × 200 resolution, features high contrast and wide viewing angle. USB 1.1 with device and host support Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. Adapting 7 × GPIO pins and USB+/- pins 1 × I2C, 1 × UART, 2 × 12-bit ADC, 6 × controllable PWM channels. Accurate clock and timer on-chip. Built-in temperature sensor for real-time monitoring of chip temperature. 12 × programmable I/O (PIO) state machines for custom peripheral support

Note:Version 2 please use corresponding demo code .This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Ultra low power consumption, basically power is only required for refreshing Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32) No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32) Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.

7,5-Zoll-Passiv-NFC-betriebenes E-Paper, keine Batterie, drahtlose Stromversorgung und Datenübertragung

This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Onboard voltage translator, compatible with 3.3V/5V MCUs Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. No backlight, keeps displaying last content for a long time even when power down ; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Ultra low power consumption, basically power is only required for refreshing;SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. E-Paper Display Panel E-ink Electronic Paper Screen Module pi zero raspberry pi zero w raspberry pi 3b pi zero w raspberry pi display e ink display stm32

4,2 Zoll großes passives NFC-gespeistes E-Paper, keine Batterie, drahtlose Stromversorgung und Datenübertragung

2,13 Zoll großes passives NFC-gespeistes E-Paper, keine Batterie, kabellose Stromversorgung und Datenübertragung

2.9inch capacitive touch ePaper module, 296×128 resolution. 5-points touch support, user-defined wakeup gesture. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. Reversed control interface, for connecting with controller boards like STM32, etc. Comes with development resources and manual (examples for Raspberry Pi). paper display refresh raspberry pico module view angle tag shelf lable interface backlight eink wareshare

2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels,Supports waken up by user-defined gesture No backlight, keeps displaying last content for a long time even when power down,Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards,SPI interface, for connecting with controller boards like Arduino/STM32, etc. SPI interface, for connecting with controller boards like Arduino/STM32, etc.

Verwendet neuartige passive NFC-Technologie: Keine Batterie erforderlich, keine Probleme mehr mit der Batterielebensdauer Wireless NFC-Powered Display Refreshing: Keine unordentliche Verkabelung, stabiler Betrieb, schnelles Aktualisieren Wie es funktioniert: Um den Inhalt des Displays zu aktualisieren, verwenden Sie ein Smartphone mit NFC-Funktion oder ein NFC-Lesegerät in der Nähe des E-Papers für die kabellose Energieversorgung und Datenübertragung. Spüren Sie die Magie: Auffrischung per Smartphone, mit Android APP, so einfach wie das Durchziehen einer Kreditkarte Anwendungsbeispiele: Geeignet für Preisschilder, Anlagen-/Ausrüstungsschilder, Regaletiketten, Konferenzschilder Spezifikationen Stromversorgung Wireless

Waveshare 2.7inch NFC-Powered E-Paper Modul Das Waveshare 2.7inch NFC-Powered E-Paper Modul ist ein passives Display, das ohne eigene Stromversorgung funktioniert. Es nutzt die Energieübertragung über NFC (Near Field Communication), um den Bildinhalt drahtlos zu aktualisieren. Eine Batterie oder Verkabelung ist nicht erforderlich. Das Display zeigt Inhalte in Schwarz-Weiß an und verwendet E-Paper-Technologie, die ein papierähnliches Erscheinungsbild erzeugt und eine hohe Lesbarkeit unter Umgebungslicht bietet. Das Modul eignet sich für Anwendungen wie elektronische Preisschilder, Inventar- oder Ausweisetiketten und Informationsanzeigen. Das Modul verfügt über eine Auflösung von 264 × 176 Pixeln und eine Anzeigefläche von 57,29 × 38,19 mm. Es unterstützt eine 2-stufige Graustufendarstellung und einen Betrachtungswinkel von über 170°. Das Bild wird innerhalb von etwa 6 Sekunden

2.13″ E-Paper HAT+, compared to the previous Waveshare V2, Waveshare V3 and Waveshare V4 basic versions, this latest V4 version with upgraded HAT+ Standard brings improved interoperability. Support Partial Refresh, Low Power, 170° Wide Viewing Angle, Black and White Color, Paper-Like Effect With standard Pi 40PIN GPIO Header, compatible With Raspberry Pi Series Boards/Jetson Nano. Onboard high-precision RTC chip for accurate time control. Optimized PCB layout with additional mounting holes for fixing screws Adopts Immersion Gold process, anti-oxidation and anti-corrosion, enhances soldering performance and improves electrical properties, with better durability and reliability to meet various applications. Thin and light design, compact in Size, more space-saving Adopts Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi No backlight required, can maintain the display content of the last screen for a long time when powered off. Can provide with online development resources and manual, such as driver board circuit diagram, examples for Raspberry Pi OS/Jetson Nano and can provide pwnagotchi porting tutorial

Bieten Sie online Bedienungsanleitung (Beispiele für Raspberry Pi/Jetson Nano/Arduino/STM32), bitte überprüfen Sie das Handbuch sorgfältig vor dem Gebrauch! Dies ist ein E-Ink-Raw-Display, 2,9 Zoll, 296 x 128 Auflösung, mit eingebettetem Controller, Kommunikation über SPI-Schnittstelle, unterstützt teilweise Aktualisierung. Aufgrund der Vorteile wie ultra-niedrigen Stromverbrauch, großer Betrachtungswinkel, klares Display ohne Strom, ist es eine ideale Wahl für Anwendungen wie Regaletikett, Industrieinstrument, und so weiter. Keine Hintergrundbeleuchtung, zeigt den letzten Inhalt für eine lange Zeit an, auch wenn er ausgeschaltet ist Sehr geringer Stromverbrauch, im Grunde wird nur Strom zum Erfrischen

7.3inch e-Paper (E) - raw display, without driver board. Adopts E_Ink Spectra 6(E6) technology, supports 6-Color display No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Can provide with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/STM32) Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...