raspberry pi zero 2 wh

Provide online user manual, please check the manual carefully before using. Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/STM32). Partial refresh is not supported. No backlight.keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs. Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

✨Der ETH/USB-HUB HAT (B) ist ein Ethernet- und USB-Hub, der mit Raspberry Pi kompatibel ist und 1 x RJ45-Ethernet-Port und 3 x USB 2.0-Anschlüsse bietet. ✨ Das Pogo-Pin-Design ist auf die Zero-Serie spezialisiert, während der integrierte normale USB-Anschluss verwendet werden kann, um mit anderen RPi-Boards über ein USB-Kabel zu verbinden. ✨3 x erweiterte USB-Anschlüsse, kompatibel mit USB 2.0/1.1; mit RTL8152B-Ethernet-Chip, unterstützt 1 x RJ45-Ethernet-Port, 10/100 m Auto-Negotiation ✨Pogo Pin Design, für direkte Verbindung mit RPi Zero/Zero 2W/Zero W/Zero WH ✨USB-HUB-Anschluss, zum Anschluss mit RPi 4B/3B+/3A+/2B über USB-Kabel

【Compatible with Raspberry Pi / Jetson Nano】Standard Pi 40 PIN GPIO expansion connector,suitable for Raspberry Pi series boards / Jetson Nano 【Power isolation】Equipped with power supply isolation, it provides a stable isolation voltage and does not require additional power supply for the isolation terminals 【Support 2-Channel】Equipped with a MCP2515CAN controller and SN65HVD230CAN transceiver, it allows 2-channel CAN communication. 【Digital isolaton】Onboard digital isolator,signal isolation communication is safer and more stable,with strong anti-interference ability. 【Onboard jumpers】Equipped with SM24CANB TVS (Transient Voltage Suppressor) diodes,ESD protection and transient peak voltage protection for safer and more satble,Onboard voltage conversion circuit, select 3.3V/5V operating voltage by jumper. Breakout SPI and I2C control pins, for connecting with other host control boards

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.Breakout SPI control pins, for connecting with host control boards 1-Ch CAN, adopts MCP2515 controller and CAN transceiver, converts SPI to CAN.2-Ch RS485, adopts SC16IS752+SP3485 dual-chip combination, converts SPI to RS485 Onboard power conversion circuit, supports 8~28V wide voltage power supply, can power the Raspberry Pi at the same time.Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal Onboard unibody digital isolation, for isolating the signal, reliable and jamproof, low power consumption.Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance.Onboard 120Ω terminal resistor, configured by jumper.Breakout SPI control pins, for connecting with host control boards

SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc. No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Onboard voltage translator, compatible with 3.3V / 5V MCUs Comes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

【40PIN GPIO extension header】Standard Pi 40PIN GPIO extension header, supports for Raspberry Pi series boards 【Multiple sensors】Sense HAT for Raspberry Pi 5 integrates multi powerful sensors such as gyroscope, accelerometer, magnetometer, barometer, temperature and humidity sensor, etc 【I2C Interface】Brings I2C control pins, for connecting other host boards like STM32 【Development resources and manual】Comes with development resources and manual (examples for Raspberry Pi/STM32)

Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ I2C interface, only 2 pins are required for moving and light intensity sensing Onboard TSL25911FN light-to-digital converter, with embedded ADC, provides a value that approximates the human eye response to assist the module Onboard PCA9685 chip, provides 12-bit resolution PWM signal for moving control Onboard voltage level translator, compatible with 3.3V/5V operating voltage Specific acrylic board to fix the Raspberry Pi camera, make it easy to install Assembly guide: www.waveshare.com/img/devkit/accBoard/Pan-Tilt-HAT/Pan-Tilt-HAT-assemble.jpg

This module Adopts CAN controller MCP2515 and CAN transceiver ATA6561-GAQW-N dual chips combined solution. The onboard 2-channel chip solution supports dual-channel CAN interface communication, and only one module is needed to carry out CAN transceiver test on RPI Onboard level conversion circuit, the working level of 3.3V/5V can be switched by slide switch. Onboard 120Ω terminal resistance, it can be set Enable by slide switch Onboard SM24CANB (Transient Voltage Suppressor), anti-static and transient spike voltage Leads out the SPI control interface, for connecting with host control boards like STM32/Ardui. Notice：Raspberry Pi in the photos is NOT included.

The PoE-ETH-USB-HUB-BOX is Designed for Raspberry Pi Zero, compatible with Zero series boards Incorporates RTL8152B Ethernet chip, with 10M / 100M auto-negotiation RJ45 port.PoE (Power over Ethernet) feature, 802.3af-compliant Fully isolated SMPS (Switch Mode Power Supply).3x extended USB ports, compatible with USB 2.0 / 1.1 Angle rounded design, smooth hand feeling, "simple snap" case lid.Quality ABS material, dull polish surface, anti-fingerprint Comes with two different lids, changing as you like

【Multiple motherboards Support】IMX219-160 Camera, Fits NVIDIA Jetson Nano Developer Kit and RPi 5/4B/3B+/3B/Zero/Zero Zero 2 W/WH Boards and Compute Module CM3 / CM3+ / CM4 Note: Extra FPC cable is required for Raspberry Pi 5, CM3/3+/4 and Zero series 【High Resolution】3280 × 2464 High Resolution, 8 Megapixels Camera, 160° FOV 【Suitable for AI projects】Combined with Jetson Nano AI computer, this camera suits for AI projects such as:Face recognition,road mark detection,license plate recognition

No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3 Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi Adapting SPI interface for connecting with controller boards like Raspberry Pi / Arduino / STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

2.9 inch touch e-Paper display HAT two-color E-Ink touchscreen display for Raspberry Pi, 296×128 pixels, support 5-points capacitive touch, user-defined wakeup gesture Standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi series boards, reversed control interface, I2C bus for touch panel, SPI bus for display, for connecting with controller boards like Arduino/STM32, etc. No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, touch control power supply configuration, basically power is only required for refreshing Support partial refresh, low power, wide viewing angle, paper-like effect, ideal for price tags, shelf labels, industrial instruments etc.

320×480 resolution, 262K colors, clear and colorful displaying effect. High touch screen transmittance, fast response and long lifetime Embedded with ST7796S driver chip and FT6336U capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins Onboard TF card slot for storing more pictures, videos, music, etc. Adapting 15PIN connector and 18PIN FPC slot for connecting the LCD module to the host board Onboard voltage translator, compatible with 3.3V / 5V operating voltage Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.

Designed for Raspberry Pi Zero, compatible with Zero series boards. Incorporates RTL8152B Ethernet chip, with 10M / 100M auto-negotiation RJ45 port. PoE (Power over Ethernet) feature, 802.3af-compliant. Fully isolated SMPS (Switch Mode Power Supply). 3x extended USB ports, compatible with USB 2.0 / 1.1

Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ CAN function, onboard CAN controller MCP2515 via SPI interface, with transceiver SN65HVD230 RS485 function, controlled via UART, half-duplex communication, with transceiver SP3485 Reserved control pins, allows to work with other control boards Comes with development resources and manual (examples in wiringPi/python)

RTC WatchDog HAT with standard Raspberry Pi 40PIN GPIO header, for Raspberry Pi series boards, Jetson Nano, Real time clock, watchdog, all in one compact module Incorporates DS3231SN high precision RTC chip, with backup battery holder Auto reset monitoring, monitoring circuit with auto reset function, using I2C communication

Designed for Raspberry Pi Zero, compatible with Zero series boards Incorporates RTL8152B Ethernet chip, with 10M / 100M auto-negotiation RJ45 port PoE (Power over Ethernet) feature, 802.3af-compliant Fully isolated SMPS (Switch Mode Power Supply); 3x extended USB ports, compatible with USB 2.0 / 1.1

This is 2.13inch E-Ink Display HAT with Pi 40PIN GPIO extension header, compatible with Raspberry Pi series boards (includes Pi 5/4B/3B+/3B/2B/Zero W/WH/Zero 2 W,etc. ) and compatible with Jetson Nano. 250x122 resolution, Black and White Two Display colors, with embedded controller, communicating via SPI interface, supports partial refresh. No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. SPI interface, for connecting with controller boards like Ardui/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs. IMPORTANT Version Notice: The driver board is Rev2.1 (Version 2.1), which is independent of the screen version. Currently, there is only Rev2.1 (Version 2.1) for the driver board and QC label V4 is for the screen version, QC label V4 is currently being shipped.

2PCS Version, Provide online user manual, please check the manual carefully before using! IMPORTANT: Rev2.1 is the version of the driver board, which is independent of the screen version. Currently, there is only Rev2.1; QC target V3 and V4 are screen versions, and V4 is currently being shipped. V4 version is fully compatible with V3; and it provides the demo that can realize a fast refreshing function. This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs

RS485 CAN HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH, with standard Raspberry Pi 40PIN GPIO extension header CAN function, onboard CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230 RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485 Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightningproof & anti-electrostatic Reserved control pins, allows to work with other control boards, comes with online development resources and manual (examples in wiringPi/python)

Motor und Servo Driver HAT ist ein Modul von DC-Motor und Servotreiber, speziell für Raspberry Pi entwickelt. Dieses Modul kann 2 Kanäle von DC-Motoren und 6 Kanäle von Servos gleichzeitig antreiben. Es hat einen separaten Netzschalter entwickelt. Nach dem Einschalten muss der Strom auf die ON-Position gedreht werden. Zusätzlich werden alle Adresslinien von I2C ausgeführt und die Adresse kann mittels DIP-Schalter eingestellt werden. Integrierter PCA9685-Chip, I2C-Kommunikation, integrierter PWM-Treiber und eine Uhr, keine Notwendigkeit, kontinuierliche Signale zu senden, um die Ressourcen des Mikrocontrollers zu belegen. Onboard TB6612FNG, Dual-H-Brücken-Motortreiber, kontinuierlicher Treiberstrom von jedem Kanal bis zu 1 A

Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Onboard SC16IS752, expands 2-ch UART and 8 programmable GPIO through I2C, no extra pin required It is stackable up to 16 this modules by setting the address jumper, that means up to 32-ch UART Onboard multi LEDs for indicating the UART working status Reserved I2C control pins, allows to work with other control boards

Coowell Raspberry Pi 8 Channel Relay Module HAT for Raspberry Pi 4B+ 4B 3B+ 3B 2B+ Zero W WH Jetson Nano Help The Pi to Control Home Appliances

The Motor Driver HAT is designed for Raspberry Pi, controlled via I2C interface, will drive two DC motors at the same time. It's an ideal choice for you to DIY mobile robots. Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ I2C controlled, by setting 5 address jumpers, it is stackable up to 32 this modules Onboard PCA9685 chip, provides 12-bit hardware PWM to adjust motor speed Onboard TB6612FNG dual H-bridge motor driver, high efficiency, low heating Integrates 5V regulator, up to 3A output current, can be powered from batt through VIN terminal Reserved I2C control pins, allows to work with other control boards Comes with development resources and manual (examples in BCM2835, wiringPi, and python)

1,3 Zoll LCD Display HAT für Raspberry Pi, 1,3 Zoll Diagonale, 240 (H) RGB x 240 (V) Auflösung, ST7789 Treiber, Kommunikation über SPI-Schnittstelle RGB 65 K Farbdisplay, hohe Auflösung in kleiner Größe 3,3 cm IPS-Bildschirm, breiter Betrachtungswinkel, bessere Anzeige 1 x Joystick, 3 x Druckknöpfe, handlich und nützlich Onboard Standard Raspberry Pi 40PIN GPIO Extension Header, unterstützt Raspberry Pi Series Boards

✨Der ETH/USB HUB HAT (B) ist ein Ethernet- und USB-HUB, der mit Raspberry Pi kompatibel ist und 1 x RJ45-Ethernet-Anschluss und 3 x USB 2.0-Anschlüsse bietet. ✨ Das Pogo-Pin-Design ist auf die Zero-Serie spezialisiert, während der normale USB-Anschluss an Bord verwendet werden kann, um mit anderen RPi-Boards über ein USB-Kabel zu verbinden. ✨ 3 x erweiterte USB-Anschlüsse, kompatibel mit USB 2.0/1.1; mit RTL8152B Ethernet-Chip, unterstützt 1 x RJ45-Ethernet-Port, 10/100 m Auto-Negotiation ✨Pogo Pin Design, für direkte Verbindung mit RPi Zero/Zero 2W/Zero W/Zero WH ✨USB-HUB-Anschluss, zum Anschluss an RPi 4B/3B+/3A+/2B über USB-Kabel

Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485 CAN function, onboard CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230 Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightningproof & anti-electrostatic Reserved control pins, allows to work with other control boards,comes with development resources and manual (examples in wiringPi/python)

Full-Color RGB LED Matrix Panel for Raspberry Pi 4B+ 4B 3B+ 3B 2B+ Zero W WH Pico ESP32 Ardui 2.5mm Pitch 64×64 Pixels Adjustable Brightness

This is a tri-olor 2.13 inch E-paper Module Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano, Arduino,Nucleo,STM32 SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing Onboard voltage translator, compatible with 3.3V/5V MCUs Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

The Raspberry Pi stepper motor HAT comes with standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano The DRV8825 stepper motor driver board has onboard dual DRV8825 motor controller IC with built-in microstepping indexer, drives two stepper motors, easy to use This Raspberry Pi stepper motor kit with 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step The Raspberry Pi stepper motor shield with adjustable motor drive current via potentiometer, maximum 2.5A current output Feel free to contact us if you have any problem with using this item, we will always be ready to help solve the problems.